• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.44-50
• /
• 2019

HNIW is a high energy material and has four crystalline phases, it is known that the thermal properties of the material depend on the crystal phase. In this sturdy, the viscosity, mechanical and burning properties of a solid propellant with nitrate ester polyester(NEPE) system with respect to the crystal phases of HNIW. According to the crystal phase of HNIW, the mechanical properties of the cured propellant did not change considerably, however differences were observed in the burning properties. Considering both a high density and stable burning properties, the optimum crystal phase of HNIW can be identified as the main factor influencing to the NEPE system propellant.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.591-596
• /
• 2006

In order to analyze the tailorbility of different fabrics for men's suit, FAST system has been used for measuring the distribution of mechanical properties in this study. As results, cashmere mixed woolen fabrics showed the minimum degree in relaxation shrinkage, formability, and shear rigidity than any other fabrics, and also showed more than 6% as maximum level of extensibility. Thus, cashmere mixed woolen fabrics requires careful tailoring in lay-out, marking, and cutting. It is necessary to establish new tailoring criteria for automatic sewing with cashmere mixed woolen fabrics than any other fabrics, because they show more failure rate of tailorbility. There have been noticeably more variation of shrinkage and extension for woolen fabrics with cashmere mixed than 100% woolen fabrics by evaluating the formability of the suits when these are completed to suits through cutting and tailoring from fabrics. Especially nylon mixed woolen fabrics showed shrinkage overall, but polyester mixed woolen fabrics showed extension at waist area. Thus, it is necessary to adjust the appropriate overfeed rate considering the amount of shrinkage and extension while tailoring.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.55-61
• /
• 2017

A non-fluorinated polystearyl methacrylate water repellent was synthesized by emulsion polymerization. The number and weight averaged molecular weights were obtained at around 137,277 and 237,754g/mole. The melting point was observed at $32^{\circ}C$. The contact angle of water droplet on fabrics treated with the water repellent was $140{\sim}145^{\circ}$ for cotton and polyester, and $125{\sim}130^{\circ}$ for wool and nylon. Since the critical surface tension was estimated at 20.7mN/m, even though relatively not so strong as fluorinated water repellent, it is considered to be used as a good water repellent practically.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.151-160
• /
• 2017

Growing demand and rapid development of the synthetic fiber rope in mooring system have taken place since it has been used in deep water platform lately. Unlike a chain mooring, synthetic fiber rope composed of lightweight materials such as Polyester(polyethylene terephthalate), HMPE(high modulus polyethylene) and Aramid(aromatic polyamide). Non-linear stiffness and another failure mode are distinct characteristics of synthetic fiber rope when compared to mooring chain. When these ropes are exposed to environmental load for a long time, the length of rope will be increased permanently. This is called 'the creep phenomenon'. Due to the phenomenon, The initial characteristics of mooring systems would be changed because the length and stiffness of the rope have been changed as time goes on. The changed characteristics of fiber rope cause different mooring tension and vessel offset compared to the initial design condition. Commercial mooring analysis software that widely used in industries is unable to take into account this phenomenon automatically. Even though the American Petroleum Institute (API) or other classification rules present some standard or criteria with respect to length and stiffness of a mooring line, simulation guide considers the mechanical properties that is not mentioned in such rules. In this paper, the effect of creep phenomenon in the fiber rope mooring system under specific environment condition is investigated. Desiged mooring system for a Mobile Offshore Drilling Unit(MODU) with HMPE rope which has the highest creep is analyzed in a time domain in order to investigate the effects creep phenomenon to vessel offset and mooring tension. We have developed a new procedure to an analysis of mooring system reflecting the creep phenomenon and it is validated through a time domain simulation using non-linear mooring analysis software, OrcaFlex. The result shows that the creep phenomenon should be considered in analysis procedure because it affects the length and stiffness of synthetic fiber rope in case of high water temperature and permanent mooring system.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.276-281
• /
• 2008

Glass-fiber reinforced polyester(GFRP) composite material is a promising alternative to existing construction materials such as steel, concrete and wood. One of passible applications of GFRP composite material is to build temporary bridges by assembling GFRP composite decks. In this paper, we develop a system of temporary arch bridges that can be built by easy assembling of GFRP composite decks. For this purpose, several types of temporary arch bridges are suggested and verified by FE analysis.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.86-98
• /
• 2009

The fashion industry saw the emergence of environment-friendly and natural fabric materials recently. The naturalism trend has established sectors in the textile and fashion industry also. Ramie and hemp have long been favored fabric materials in Korea especially for summer. The hand-related mechanical/physical properties of the fabric specimens were analyzed using a fabric objective measurement system, KES(Kawabata Evaluation System). Subjective evaluation was also implemented based on a series of selected adjectives. Studies on natural dyeing methods are important since the establishment of scientific approach is needed in terms of environment and human safety along with the reproduction of traditional natural dyeing methods. In this study, linen, ramie, hemp, and cotton/polyester/linen union fabric specimens were used for the natural dyeing using Rubia akane Nakai with the mordant of gallnut. ${\Delta}E$ values of dyed fabric specimens, mordanted and dyed once using Rubia akane Nakai, increased significantly compared to those of repeatedly dyed fabric specimens without mordanting.

• Corrosion Science and Technology
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2021

Many Korean industrial plants including nuclear and fossil power plants use seawater as the ultimate heat sink to cool the heat generated by various facilities. Owing to the high corrosivity of seawater, facilities and piping made of metal material in contact with seawater are coated or lined with polymeric materials to avoid direct contact with seawater. However, polymeric materials used as coating and lining have some level of permeability to water and are degraded over time. Korean industrial plants have also experienced a gradual increase in the frequency of damage to pipes in seawater systems due to prolonged operating periods. In the event of a cavitation-like phenomenon, coating or lining inside the piping is likely to be damaged faster than expected. In this paper, the cause of water leakage due to base metal damage caused by the failure of the polyester lining in seawater system piping was assessed and the experience with establishing countermeasures to prevent such damage was described.

• Science of Emotion and Sensibility
• /
• v.9 no.spc3
• /
• pp.243-249
• /
• 2006

There are many CAD commercial systems such as fabric design CAD for fabric designers and pattern design CAD including visual wearing system for garment designers. But there is no fabric design system for weaving factory, so the data base system related to the fabric design for weaving factory is needed. Therefore, in this study, as a preliminary study of the data base system for fabric design, easy decision of warp and weft densities according to the various yarn count, weave constructions and materials were surveyed through analysis of design plan for nylon and polyester fabrics from wearing factories.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.212-218
• /
• 2002

This research is the development of a distributed tactile sensor using PVDF film far the detection of the contact state. The prototype of the tactile sensor with 8$\times$8 taxels was fabricated using PVDF film and flexible circuitry. In the fabrication procedure, the electrode and the common electrode patterns are attached to the both side of the 28${\mu}m$ thickness PVDF film. The sensor is covered with polyester film for insulation. The signals of a contact pressure to the tactile sensor are sensed and processed in the DSP system in which the signals are digitalized and filtered. And the signals are integrated for taking the force profile. The processed signals of the output of the sensor are visualized to take the shape and force distribution of the contact object in personal computer. The usefulness of the sensor system is verified through the sensing examples.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.199-209
• /
• 1991

In this paper, the fabrics for Korean folk clothes(KFC) undergoes repeated laundering under given condition. After this cyclic laundering was applied, the mechanical properties of the specimen were measured using KES-F system in order to evaluated the end-use performance of fabrics for KFC. And also, the crease recovery of fabrics for KFC were measured by shirley crease recovery tester. 78 different kinds of commercial silk fabrics and polyester fabrics for KFC were used for this study. The experimental results were analysed statistically to relate the mechanical properties and the crease recovery of fabrics for KFC. Furthermore, these changes in dimensional stability, mechanical properties and handle of fabrics for KFC were discussed in comparison with those values for silk fabrics and polyester fabrics. The results obtained are as follows. 1. Regardless of materials, remarkable increase are observed in shrinkage of the fabrics for KFC about repeated laundering, but dull increase are observed in shrinkage after 10 cycles of the repeated laundering. On the other hand, slack extend are observed in dimensions after 20 cycles of the repeated laundering. The shrinkage of fabrics for KFC after 10 cycles of the lundering showed that the silk fabrics are $1.74{\pm}0.33\%$ (warp direction) and $1.35{\pm}0.23\%$ (weft direction) and the polyester fabrics are $1.45{\pm}0.22\%$ (warp direction) and $1.25{\pm}0.23\%$ (weft direction). 2. Except for tensile property, these changes in mechanical properties of fabrics for KFC by laundering have $\pm$ 16 range of bending, shearing, compression, surface, thickness & weight as compared with before laundering. Particularly, the LT and RT about $1\~3$ cycles of the repeated laundering showed remarkable decrease. And SMD, WC, T & W of fabrics for KFC by the laundering were more increased than one for original fabrics. But B, 2HB, G, 2HG, 2HGS were decreased more than one for original fabrics. 3. 'Stiffness', 'Anti-drape', 'Crispness' and 'Scroop' hand values decrease and'Fullness & softness', 'Flexibility & softness' hand values increase with repeated laundering. 4. Remarkable decrease are observed in crease recoveries about $1\~5$ cycles of the repeated lundering, but slack decrease are observed in crease recoveries after 5 cycles of repeated laundering. The crease recovery of fabrics for KFC have negative(-) correlation with LT, RT, G, RC and MMD, This fact implies that the smaller these values, the larger the crease recovery. The crease recovery of fabrics for KFC has a high degree of correlation with the mechanical properties such as shearing, compression, surface property. And also, the crease recovery are expected by measuring the mechanical properties such as G, 2HG, 2HGS, RC, WC, LC, MIU, MMD and SMD, according to the obtained regression equation.