• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.443-450
• /
• 1994

Polyelectrolytes of various ionization degrees, which are prepared by neutralization of poly(acrylic acid)(PAA), were crosslinked by ethylane glycol diglycidyl ether(EGDE) in aqueous solution. $C_{gel}$, the minimum polymer concentration at which gelation occurs, was higher than expected. $C_{gel}$ was comparable with that of neutral polymer. This is considered to be due to the size contraction of polyelectrolyte, which comes from ionic strength increase as polymer concentration is increased. $C_{gel}$ is low when molecular weight of the sample becomes high. It reveals that polyelectrolyte is crosslinked in coil form not in extended rod form. This behavior is similar to the crosslinking of neutral polymers. Polyelectrolytes of partially ionized sample generally follow the behavior of fully ionized polyelectrolyte. Polyelectrolyte with added salt was also studied. Considering the pH dependence of EDGE reactivity it was difficult to compare the system which differs in pH significantly.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3703-3708
• /
• 2013

The scaling relationship of the longest relaxation time of a single chain of semiflexible biological polyelectrolyte has been investigated by performing well-established coarse-grained Brownian dynamics simulations. Two kinds of longest relaxation times were estimated from time-sequences of chain trajectories, and their behaviors were interpreted by applying the scaling law for different molecular weights of polyelectrolyte and Debye lengths. The scaling exponents for longest stress relaxation and rotational relaxation are found in the ranges of 1.67-1.79 and 1.65-1.81, respectively, depending on the physicochemical interaction of electrostatic Debye screening. The scaling exponent increases with decreasing screening effect, which is a special feature of polyelectrolytes differing from neutral polymers. It revealed that the weak screening allows a polyelectrolyte chain to follow the behavior in good solvent due to the strong electrostatic repulsion between beads.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.59-65
• /
• 2008

Electrochemical properties of pulp fiber could be modified by LbL(Layer-by-Layer) multilayering. Salt concentration and pH affect the conformation and ionization degree of polyelectrolyte. In this study, therefore, we intended to evaluate the effect of pH and salt concentration in polyelectrolyte multilayering on the electrochemical properties of pulp fiber. The pH of the stock was varied to 4, 7, and 10. Salt concentration was controlled at 0.001, 0.003, and 0.005 M of NaCl. Higher zeta potential was obtained when pulp fibers were multilayered at the condition of higher pH and higher salt concentration. The final zeta potential of pulp fiber after multilayering was dependent on the adsorption ratio of polyelectrolyte and the initial zeta potential of fibers.

• Macromolecular Research
• /
• v.16 no.4
• /
• pp.308-313
• /
• 2008

A simple strategy was developed based on polyelectrolyte/silver nanocomposite to obtain humidity-sensitive membranes. The major component of a humid membrane is the polyTEAMPS/silver nanocomposite obtained by thermal heating the mixture of a polyelectrolyte and silver isopropylcarbamate complex. Humidity sensors prepared from polyTEAMPS/silver (w/w=100/0 and 100/6) nanocomposites had an average impedance of 292, 8.83 and $0.86\;k{\Omega}$, and 5,327, 140 and $0.93\;k{\Omega}$ at 30,60 and 95% relative humidity (RH), respectively. Hysteresis, temperature dependence and response time were also measured. Activation energies and complex impedance spectroscopy of the various components of the polyelectrolyte/silver nanocomposite films were examined for the humidity-sensing membrane.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.149-156
• /
• 2000

For the adsorption of polyelectrolyte at the surface of polyacrylamide gel particle, preferential adsorption of the large polyelectrolyte such as DNA is governed by the surface area of an adsorbent. The adsorption equilibrium constant can be varied by surface geometry of porous polymer, and it can be described as a function of ionic strength and surface area. Physical parameters affecting the adsorption were estimated using the theoretical governing equation of polyelectrolyte which electrophoretically moved along the column, and geometrical surface area was estimated by Waldman-Mayer's physical model. The separation of polyelectrolytes was studied using the physical parameters estimated by ionic strength and surface geometry.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2187-2192
• /
• 2012

This study presents a facile way synthesizing disc-like lipid bilyaer nanostructures with a cationic amphiphilic polyelectrolyte. The cationic amphiphilic polyelectrolyte was in a form of partially quarternized copolymer and was synthesized with 2-(dimethylamino)ethyl methacrylate and stearyl methacrylate. At some concentration ranges of the polymer, the addition of the polymer to lipid components during the preparation of bilayer nanostructures resulted in discs with a fairly high yield (~99%). The mechanism for the formation of the nanostructures was discussed based on the physical properties of these nanostructures and by comparing the nanostructures obtained with an anionic amphiphilic polyelectrolyte.

• Proceedings of the Korean Society of Rheology Conference
• /
• 2002.05a
• /
• pp.21-24
• /
• 2002

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.262-268
• /
• 2015

In this study, two types of catalysts were prepared via conventional metal supporting method and encapsulation of metal nanoparticles in the polyelectrolyte multilayers constructed on support. The resulting catalysts were applied to the direct synthesis of hydrogen peroxide, and the effect of catalyst preparation method on the catalyst life as well as hydrogen peroxide productivity was investigated. The catalytic activity was strongly dependent upon the acid strength of support regardless of the catalyst preparation methods and HBEA (SAR=25) with strong acidity was superior to other supports to promote the reaction. In the case of metal supported catalyst, while hydrogen peroxide productivity was higher than that of polyelectrolyte multilayered counterpart, the reaction performance was sharply decreased during catalyst recycling due to the metal leaching. On the other hand, construction of polyelectrolyte multilayers on support weakened the influence of acid support on the reaction medium and therefore resulted in the decrease of catalytic activity and the increase of hydrogen peroxide decomposition as well. It is noted, however, that the catalytic activity was maintained after 5 recycles, which suggests that the introduction of polyelectrolyte multilayers on the support is very effective to suppress the unfavorable metal leaching phenomenon during a reaction.

• Journal of Environmental Science International
• /
• v.14 no.6
• /
• pp.525-532
• /
• 2005

Polyelectrolyte titration, which was called colloid titration is based on the stoichiometric reaction between oppositely charged polyelectrolytes, This can be used, for instance, to determine the charge density of a cationic polyelectrolyte, using an anionic polyelectrolyte of known charge density, such as potassium polyvinyl sulfate (PPVS). The technique requires a suitable method of end-point detection and there are several possibilities. In this work, two methods have been investigated: visual titrimetry based on the color change of a cationic dye (o-toluidine blue, o-Tb) and spectrophotometry based on the absorbance change corresponding to the color change of the same dye. These have been applied to several cationic polyelectrolytes with different charge density and molecular weight. In all cases, the cationic charge was due to quaternary nitrogen groups. In the case of cationic dye, it was shown that the sharpness depends on the charge density of cationic polyelectrolyte. With the polyelectrolytes of lower charge density, the binding to PPVS is weaker and binding of the dye to PPVS can occur before all of the polyelectrolyte charge has been neutralized. However, by carrying out titrations at several polyelectrolyte concentrations, good linear relationships were found, from which reliable charge density values could be derived. Effects of pH and ionic strength were also briefly investigated. For cationic polyelectrolytes (copolymers of acrylamide and dimethylaminoethy] acrylate), there was some loss of charge at higher pH values, probably as a result of hydrolysis. Increasing ionic strength causes a less distinct color change of o-Tb, as a result of weaker electrostatic interactions.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.24.2-24.2
• /
• 2011

Ru is used as a bottom electrode capacitor in dynamic random access memories (DRAMs) and ferroelectric random access memories (FRAMs). The surface of the Ru needs to be planarized which is usually done by chemical mechanical polishing (CMP). Ru CMP process requires chemical slurry consisting of abrasive particles and oxidizer. A slurry containing NaIO4 and alumina particles is already proposed for Ru CMP process. However, the stability of the slurry is critical in the CMP process since if the particles in the slurry get agglomerated it would leave scratches on the surface being planarized. Thus, in the present work, the stability behavior of the slurry using a suitable anionic polyelectrolyte is investigated. The parameters such as slurry pH, polyelectrolyte concentration, adsorption time and the sequence of addition of chemicals are optimized. The results show that the slurry is stable for longer time at an optimized condition. The polishing behavior of the Ru using the optimized slurry is also investigated.