• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.247-255
• /
• 1992

Polystyrene-poly(caprolactone) (PS-PCL) block copolymer was synthesized from macroazoinitiator, and its compatibilizing effect in poly(2, 6-dimethyl-1, 4-phenylene oxide) (PPO)/poly(styrene-co-acrylonitrile) (SAN, 25wt% acrylonitrile) blend was studied. PS block and PCL block in the block copolymer had shown miscibility with PPO and SAN respectively. The dissolution of SAN into PPO domain was promoted by the addition of the PS-PCL block copolymer.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.74-79
• /
• 2007

Polypyrrole (PPy) was made by an emulsion polymerization using iron (III) chloride ($FeCl_3$) as an initiator and dodecyl benzene sulfuric acid (DBSA) as an emulsifier and dopant. Poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) was sulfonated by chlorosulfonic acid (CSA). The cathode was composed of $PPy^+DBS^-$ complex, conductor powder, and PPO or sulfonated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO) as a binder or dopant. The charge-discharge performance of $PPy^+DBS^-/SPPO$ cathode was increased as the extent of about 50%, than $PPy^+DBS^-/PPO$. This is because SPPO played a role as a binder as well as a dopant. In addition, sulfonation brings out the increase of miscibility between PPy and SPPO, and the increase of contact area between cathode and electrolyte.

• Carbon letters
• /
• v.13 no.4
• /
• pp.221-225
• /
• 2012

Graphite oxide (GO) was produced using the modified Hummer's method. Poly(p-phenylene sulfide) (PPS)/reduced graphite oxide (RGO) composites were prepared by in situ polymerization method. The electrical conductivity of the PPS/RGO composites was no more than 82 S/m. It was found that as GO content increased in the PPS/RGO composites, the crystallization temperature and electrical conductivity of the composites increased and the percolation threshold value was at 5-8 wt% of GO content.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.106-112
• /
• 2010

This study deals with the surface fluorination of poly(phenylene oxide) (PPO) with the direct contact of 100 ppm fluorine gas. To characterize the surface fluorinated membranes, the contac angle measurement, X-ray photoelectron microscopy analysis and the gas permeation experiments were performed. As the fluorination time increases, the hydrophobicity of membrane surfaces is increased by the surface characterization. In general, as expected, the overall gas permeability was reduced. Typically, the permeability reduction of 33% for nitrogen, 23% for oxygen and 3% for carbon dioxide were observed when the membranes were exposed in 100 ppm environment for 60 min., meanwhile the selectivity was increased from 3.92 to 4.47 for $O_2/N_2$ and 18.09 to 25.4 for $O_2/N_2$, respectively.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.224-229
• /
• 2009

The dielectric properties of semi-IPN poly(phenylene oxide)(PPO) blend/$BaTiO_3$(BT) composites are investigated. The composites are fabricated via melt-mixing of crosslinker and peroxide in precursor PPO composite obtained by precipitating the suspension consisted of PPO, BT and toluene into methylethyl ketone, poor solvent of PPO. The permittivity of the precursor PPO composites shows higher value than that of integral-blended PPO composites by extruder and coincides with the theoretical value calculated by logarithmic rule of mixture. The blend of PPO and cross-linked triallyl isocyanurate is most effective for lowering the permittivity and loss tangent owing to the suppression of the orientation polarization of matrix. In contrast, 4,4'-(1,3-phenylene diisopropylidene) bisaniline, which has amine unit in its structure, increases the permittivity as well as loss tangent of the composite, but it has the ability to densify the matrix resin and the interfacial adhesion between the matrix and filler to improves flexural strength and modulus.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.64-65
• /
• 1994

근래 환경 문제의 중요성이 크게 대두되면서 여러 제조 공정에서 방출되는 폐수등을 처리하는데 필요한 내구성이나, 내미생물성, 내약품성이 우수한 분리막 재료에 대한 연구가 진행되고 있다. 내구성이 우수한 역삼투막 재료를 얻기 위한 방법의 하나로 엔지니어링 플라스틱을 친수화시키는 방법이 개발되어 왔다. 특히 PPO (poly(2-6-dimethyl-1,4-phenylene oxide))로 만들어진 분리막은 내산화성이 우수하고 내구성이 뛰어나다고 알려져왔고 본 연구에서는 PPO에 carboxyl기를 도입하여 친수성을 부여하고, 상전이법을 이용하여 얇은 표피층이 선택성을 높이고 다공성 구조가 표피층을 지지하도록 만든 비대칭성 구조의 분리막을 제조하고 그 투과특성을 살펴보았다.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.332-339
• /
• 2014

In this study, an anion-exchange ionomer solution was developed by employing poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) as the base material for the improvement of the capacitive deionization (CDI) performances. It was found that prepared quaternized PPO (QPPO) exhibited excellent ion conductivity superior to that of a commercial anion-exchange membrane (AMX, Astom Corp., Japan) and also the electrochemical properties were shown to be comparable with each other. The CDI tests were conducted by employing the porous carbon electrode coated with the ionomer solution and the result showed the high salt removal efficiency of about 94.9%. By comparing the desalination efficiencies in conventional CDI, membrane CDI (MCDI) with a commercial anion-exchange membrane, and coated CDI (CCDI) employing the porous carbon electrode coated with QPPO, it was confirmed that CCDI shows the high salt removal performance improved by 52.1% and 18.3% compared with those of conventional CDI and MCDI, respectively.

• Membrane and Water Treatment
• /
• v.6 no.1
• /
• pp.27-42
• /
• 2015

In this study, poly (phenylene oxide) (PPO) and poysulfone (PSf) were sulfonated and aminated respectively. Both sulfonated poly (phenylene oxide) (SPPO) and aminated polysulfone (APSf) were characterized via the measurement of FT-IR, swelling degree, ion exchange capacity (IEC), and ion conductivity. Then the surfaces of these membranes were modified by surface fluorination using 2000 ppm $F_2$ gas against $N_2$ gas for 1 h at room temperature. The surface fluorinated SPPO and APSf membranes were characterized again to determine any differences between the pristine and fluorinated membranes. In total, 3 types of bi-polar membranes were prepared by varying the IEC of the APSf and having a fixed value for the IEC of the SPPO. The hypochlorite concentration generated by using the surface fluorinated membranes was dependent on the IEC of the APSf and ranged from 683 to 826 ppm, while there was a considerable improvement in the durability of the surface fluorinated membranes as they remained intact even after operating for 4 h.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.269-269
• /
• 2006

The molecular structure of poly(2,6-dimethyl-4,4' -phenylene oxide)-g-poly (styrenesulfonic acid) (PPO-g-PSSA) graft copolymer was designed, and synthesized via living radical polymerization. Obtained graft copolymers were transformed into proton exchange membranes for direct methanol fuel cell (DMFC) application. The performance of the membranes was measured in terms of water uptake, proton conductivity, methanol permeability, and thermal stability. Very low methanol permeability and good proton conductivity were observed by adjusting grafting frequency and PSSA block content.

• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.89-96
• /
• 1997

PS/PPO 블렌등의 동적 탄성율 E*($\omega$)와 동적 스트레인-광학계수 O*($\omega$)을 유리전이 영역에서 동시에 측정하여, PS/PPO 3종류조성블렌드의 E*($\omega$)와 O*($\omega$)완화거동을 조성 단 일 중합체와 비교고찰하였다. PS/PPO 블렌드의 $\alpha$-분산 점탄성 거동은 조성에 관계없이 거 의 유사하여 조성 고분자가 상호 협동적으로 완화하는 것을 알수 있었다. 그러나 광학적 완 화 스펙트럼 O*($\omega$)는 정성적으로 명확히 다른 거동을 보였다. 단일 PS와 PPO의 O*($\omega$)는 전 영역에 걸쳐 상반된 부로를 나타냈으며 두 고분자의 블렌드는 조성고분자의 반대부호를 상호보상으로 인하여 복굴절이 감소하였다. 3종류블렌드는 PPO의 조성이 증가함에 따라 상 호보상에 의해 O*($\omega$)의부호가 순차적으로 변하여 반전하였으며, 저 복굴절 PS/PPO 블렌드 의 PS조성이 65-80wt% 범위내에 있음을 추정할수 있었다. 상이한 부호를 갖는 복굴절 특 성으로 인하여 블렌드 내에서 각 성분 고분자의 완화 기여를 다순 가성법칙에 의해 정량적 으로 계산하는 것이 가능하였다. 또한 PS/PPO 블렌드의 상용성을 광학적 부분 기여 파라메 터를 사용하여 고찰하였다.