• KSBB Journal
• /
• 제10권4호
• /
• pp.461-467
• /
• 1995

본 연구에서는 약물 전달체(키토산, 키토산.엽, 술폰화키토산)에 prednisolone을 분산시켜 제조한 고분자 매트릭스를 poly (DL-lactide)로 피막을 형성시킨 후 pH 1.2와 pH 7.4 인산염 완충용액에서 약물 방출실험을 하였다. 약물 방출시간은 pH 1.2에서 보다 pH 7.4에서 더 지연되였으며 약물 전달체의 함유량이 증가함에 따라 약물의 방출시간도 지연되었다. 피막된 고분자 매트릭스의 종류에 따라 지연된 약물의 방출시간은 키토산의 경우가 가장 길었으 며, 술폰화키토산, 키토산.염의 순셔였다. Monolith IC 고분자 매트릭스에 비해 2배 정도의 약물의 방출 지연성을 보인 피막된 monolithic 고분자 매트럭스 가 방출조절형 제제로서 더 바람직한 것으로 관찰되었다. 이러한 제형들은 초기 급격한 약물 방출속도의 변화를 억 제 하는 sustained release pattern 제 제 임을 확인할 수 있었다.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.28-33
• /
• 2023

The conventional FRP (Fiber Reinforced Plastic) manufacturing process used thermoset resins for ease of molding but faced the issue of non-recyclability. To address these shortcomings, a new process utilizing thermal plastic resin was developed. However, due to the high viscosity of thermal plastic resin, problems such as fiber deformation and a reduced fiber volume fraction occurred during the high-temperature, high-pressure process. In this study, to overcome the limitations of the conventional process, fiber-reinforced composite materials were manufactured through in-situ polymerization using PLA (Poly L-Lactide) resin in the VA-RTM (Vacuum Assistance Resin Transfer Molding) process. The fiber volume of the produced specimens was calculated, and resin impregnation and porosity were confirmed through optical microscopy. Additionally, molecular weight analysis using GPC (Gel Permission Chromatography) demonstrated improvements over the conventional process and emphasized the essential requirement of temperature control.

• 접착 및 계면
• /
• 제4권1호
• /
• pp.18-27
• /
• 2003

Micromechanical 시험법과 표면 젖음성 측정을 이용하여 플라즈마 처리된 생분해성 poly(p-dioxanone) (PPDO) 섬유강화 poly(L-lactide) (PLLA) 복합재료의 계면물성과 미세파괴 분해메카니즘을 연구하였다. PPDO 섬유강화 PLLA 복합재료는 장기간의 사용기간 동안 우수한 기계적 물성을 제공할 수 있다. PPDO 섬유와 PLLA 기지재료의 분해정도는 열분석과 광학적인 관찰을 통해서 확인하였다. PPDO 섬유와 PLLA 기지재료 사이의 계면전단강도와 접착일은 플라즈마 처리 시간이 60초 일때 가장 컸으며, 접착일과 polar 표면자유에너지는 계면전단강도와 비례하였다. 초기상태의 PPDO 섬유는 연성파단 형상이 나타났으나, 분해시간이 진행됨에 따라 분자량 감소로 인해 점차적으로 취성 파단 형상으로 변하였다. 계면물성과 미세파괴 분해메카니즘은 분해가 진행됨에 따라 변하기 때문에 섬유강화 생분해성 복합재료의 성능을 조절하는데 중요한 요인들이다.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.510-516
• /
• 2006

Lactide was produced from oligomeric PLA by back-biting reaction of the OH end groups. For optimization of the reaction conditions, the effects of temperature, pressure, PLA molecular weight, and catalyst type on the lactide synthesis were examined. The fraction of D,L-lactide decreased with increasing temperature. Among the various Sn-based catalysts, the D,L-lactide fraction was maximized when SnO was used. A higher yield with lower racemization was observed at lower pressure. The conversion of PLA was maximized at an oligomeric PLA molecular weight of ca. 1380. The yield of lactide increased but the fraction of D,L-lactide decreased with increasing molecular weight. The highest conversion with the lowest racemization degree was obtained at a catalyst concentration of 0.1 wt%. The lactide was more sensitive to racemization because of the entropic effect.

• KSBB Journal
• /
• 제26권4호
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• 약학회지
• /
• 제45권6호
• /
• pp.623-633
• /
• 2001

Various bupivacaine-loaded microspheres were prepared using poly(d,1-lactide) (PLA) and poly(d,1-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. The effects of process conditions such as drug loading, polymer type and solvent type on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency and yield of PLGA micro- spheres were higher than those of PLA microspheres. The prepared microspheres had an average particle size below 5${\mu}{\textrm}{m}$. The particle size range of microspheres was 1.65~2.24${\mu}{\textrm}{m}$. As a result of SEM, the particle size of PLA microspheres was smaller than that of PLGA microspheres. In morphology studies, microspheres showed a spherical shape and smooth surface in all process conditions. In thermal analysis, bupivacaine-loaded microspheres showed no peaks originating from bupivacaine. This suggested that bupivacaine base was molecular-dispersed in the polymer matrix of microspheres. The release pattern of the drug from microspheres was evaluated for 96 hours. The initial burst release of bupivacaine base decreased with increasing the molecular weight of PLGA, and the drug from microspheres released slowly. In conclusion, bupivacaine-loaded microspheres were successfully prepared from poly(d,1-lactide) and poly (d,1- lactic-co-glycolide) polymers with different molecular weights allowing control of the release rate.

• Elastomers and Composites
• /
• 제49권1호
• /
• pp.13-23
• /
• 2014

본 연구에서는 생체분해성 폴리에스터 계열의 glycolide, L-lactide 및 ${\varepsilon}$-caprolactone 단량체를 이용하여 2단계 중합법에 의한 삼원 공중합체를 제조하여, DSC를 이용한 비등온 결정화 거동을 고찰하였다. 보다 더 정확한 거동을 검토하기 위하여 Avrami 식과 Ozawa 식을 조합하여 비등온 결정화 거동을 고찰하였다. 과냉각도를 분석한 결과 PGCLA21의 값이 가장 큰 값을 보이고 있으며 L-lactide 함량이 증가함에 따라 과냉각도는 증가하는 경향을 보이고 있다. 수정된 Avrami 식을 이용하여 다양한 냉각속도에서 비등온 결정화 거동 결정화 속도 상수는 큰 경향을 보이고 있지 않는 것을 알 수 있었다. Avrami 및 Ozawa 식을 조합하여 특정한 상대적 결정화도에서의 냉각함수를 구한결과 L-lactide 함량이 증가하면서 PGCL과 비교시 결정화 속도를 향상시키는 역할을 하고 있는 것으로 여겨지는 반면 PGCLA41과 PGCLA21을 비교시 L-lactide 함량이 일정 이상 증가시 logF(T) 값이 큰 것을 확인 할 수 있는데 이는 동일한 결정을 얻는데 더 많은 냉각 속도를 필요로 한다는 것을 의미하며 결정화 속도 향상에 부정적인 영향을 미치는 것으로 판단된다.

• Journal of Pharmaceutical Investigation
• /
• 제40권4호
• /
• pp.251-254
• /
• 2010

The formation of acylated peptide impurities in poly(lactide-co-glycolide) (PLGA) formulations is one of the major challenges to the development of successful sustained-release product. Octreotide, synthetic analogue of somatostatin, has been identified to be acylated in PLGA microsphere formulations. The purpose of this study was to investigate the pH effect on the formation of acylated octreotides by PLGA. In the incubation with PLGA in 0.1 M phosphate buffer at pH 7.4, approximately 98% of octreotide adsorbed to PLGA through 14 days and 66.3% of acylated octreotides were produced after 42 days, whereas the interaction of octreotide with PLGA was significantly inhibited in the incubation at pH 4, in which the acylated octreotides were observed to be 9.2% after 42 days. In the interaction study at pH 4.1-7.4, the production of acylated octreotides was demonstrated to be dependent on environmental pH. Below pH 5.0, the acylation of octreotide was significantly inhibited. This study indicates that the pH is the major factor for the formation of acylated octreotide in PLGA formulations.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1155-1160
• /
• 2009

Poly(lactide) (PLA)-coated paperboards were prepared by solution coating and thermo-compression coating methods and their effect of coating on the packaging properties such as tensile, water resistance, water vapor barrier, and heat sealing properties was tested. Compared with uncoated control paperboard, tensile strength (TS) of PLA-coated paperboard increased profoundly (2.2-2.6 folds) with slight increase in elongation at break (E). Water absorptiveness (WA) of the paperboard decreased 74-170 folds and water vapor permeability (WVP) decreased 6.3-22.1 folds by coating with PLA, which indicates an increase in the hydrophobicity of the surface of paperboard. Compared with polyethylene (PE)-coated paperboard, both PLA-coated paperboard exhibited 2.3 time higher heat sealing strength. In addition, the PLA-coated paperboards showed equal or higher wet TS than PE-coated paperboard. All the test results showed that the paperboard coated by the thermo-compression coating method was similar to or better than those of coated by the solution coating method.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.270-274
• /
• 2004

Blends of poly(l-lactide) (PLA) and low density polyethylene (LDPE) were prepared by melt mixing in order to improve the brittleness of PLA. A reactive compatibilizer with glycidyl methacrylate (GMA), PE-GMA, was required as a compatibilizer due to the immiscibility between PLA and LDPE. It contributes to reduce the domain size of dispersed phase and enhance the tensile properties of PLA/LDPE blends, especially for PLA matrix blends. A reaction product between PLA and PE-GMA, which was formed during melt-mixing and considered to act as a reactive compatibilizer, was characterized using $ ^1H-NMR$ spectroscopy.