• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.357-368
• /
• 2003

II-A isotherms and phase behaviors of 'tocomide', a newly synthesized 1,3-bis(N-(2-hydroxyethyl)-tocopherol succinylamino)-2-hydroxypropane, mixed with cholesterol and linoleic acid, was studied for its monolayer miscibility and a stable delivery formulation for antioxidant applications. The monolayer of tocomide and cholesterol was formed in a homogeneously mixed state at air-water interface. The ternary mixtures with linoleic acid showed various bulk structures, including a stable and transparent solution of thermodynamically stable lamellar phase. The lamellar structure was confirmed by the X-ray diffraction (XRD) patterns and polarized microscopy such that pure tocomide formed a liquid crystal at room temperature with a lamellar periodicity of 36.7 $\AA$(2$\theta$=2.41$^{\circ}$).

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.1-8
• /
• 2018

The effect of mixing ratio on the corrosion protection of carbon steel coated by a film composed of poly(vinylidene) fluoride (PVDF) and poly(methyl methacrylate) (PMMA) was examined using electrochemical impedance spectroscopy. Surface crystallization behavior and thermal properties of the PVDF/PMMA coated carbon steel were evaluated using polarized optical microscopy and differential scanning calorimetry, respectively. A Maltese cross-pattern spherulite crystal was observed in the PVDF/PMMA coating film, which became more apparent with increasing PVDF content. The highest corrosion protection performance was achieved with 60 wt.% PVDF-coated carbon steel, and delamination and corrosion reactions were observed for 20 wt.% PVDF-coated carbon steel. Further, corrosion protection performance with an amorphous/crystal mixture (PVDF/PMMA, 60/40 (w/w)) was better than those observed in the amorphous domain and the perfect-crystal domain of the PVDF/PMMA blended coating system.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.615-615
• /
• 2003

I. Objectives This study was performed to get some information about micromorphology of subsurface lesion of root caries by observing autofluorescence using confocal laser scanning microscope(CLSM) with minimum sample preparation. II. Materials and Methods Half-cut and 1 mm thick sample of human teeth were prepared to produce artificial root carious lesions. Incipient subsurface lesions were produced under optimal pH and saturity. The lesions were observed by polarized microscopy, CLSM, and back-scattered electron microscope(BSE). Calcium and phosphorus concentrations of the lesions were analyzed by line EDAX. (omitted)

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.205-210
• /
• 2008

The transformation of the liquid crystal complex made by binding of anionic surfactant, sodium dodecyl sulfate (SDS), into high charge density cationic polymer, the homopolymer of diallyldimethylammonium chloride (PDADMAC) was induced by adding of nonionic surfactants and investigated by means of microscopy and FE.SEM. Among nonionic surfactants in this experiments polyethylene glycol (3 mol) ether of lauryl alcohol (laureth-3) made variation in the complex. The laureth-3 transformed the complex into spherulite vesicle with the size of ca.$100{\mu}m$. This change increased the viscosity and the turbidity of the solution phase separated originally. Microscope showed that they are spherulite particles and polarized microscope suggested they are multi.lamellar liquid crystals. FE-SEM also proved that explicitly.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1350-1360
• /
• 2001

The synthesis and characterization of very stable Pd(Ⅱ) η1-imine complexes of bis(3,4-dialkyloxybenzylidene-3', 4'-dialkyloxyaniline)dichloropalladium(Ⅱ) with alkyl chain of hexyl (8), octyl (9), decyl (10) and dodecyl (11) groups, a nd of bis(4-ethyloxybenzylidene-4'-ethyloxyaniline)dichloropalladium(Ⅱ) as a model complex are described. The molecular structure with twisted board-like geometry of the complex resulting from the coordination of Pd(Ⅱ) with η1-imine bonding was confirmed by X-ray crystallographic analysis of the model complex. In contrast to the imine ligands, all the complexes with an exception of 11 display a thermally stable monotropic smectic A mesophase without any decomposition of the complex. These results, characterized by a combination of differential scanning calorimetry, optical polarized microscopy, and powder X-ray scattering experiments, are discussed.

• 폴리머
• /
• 제39권1호
• /
• pp.174-179
• /
• 2015

고분자 배향막이 없는 순수 유리 기판을 이용하여 광반응성 액정의 배향을 유도하였다. 유리 기판을 러빙하여 액정 배향을 유도한 경우, 고분자 배향막을 사용하여 유도한 경우와 같이 액정을 러빙 방향과 평행하게 배향할 수 있는 것을 편광 FTIR, 편광현미경, 복굴절 측정 등의 실험을 통해서 알 수 있었다. 순수 유리 기판을 러빙하여 액정 배향을 유도하는 메커니즘은 러빙 과정에서 유리 표면에 묻어나온 고분자들이 러빙 방향으로 늘어서 분자간 상호작용을 통하여 액정 분자들의 배향을 유도하는 것이다.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.123-127
• /
• 2011

Objectives: The purpose of this study was to investigate the status of asbestos-containing materials (ACMs) used on ships and to consider measures for preventing worker exposure to asbestos fibers. Methods: A total of 17 ships including 16 ships under repair and a ship under construction at shipyards in Korea were investigated. Bulk samples were collected from suspected ACMs on engine exhaust pipes, boiler steam pipes, generator exhaust pipes, and etc. in ships in order to identify the presence of ACMs. Types and contents of asbestos were determined using polarized light microscopy (PLM). Results: ACMs were found from 14 ships out of 17 ships investigated. Only chrysotile asbestos was found from all samples. ACMs were mainly found from samples collected at the exhaust pipes of the engine, generator and incinerator, and boiler steam pipes where exhaust gases or steam of high temperature pass through. In most cases, types of ACMs were asbestos-containing fabrics such as asbestos tape. Friable ACMs were also found in some cases. Use of ACMs on ships was relevant to built time and owner of the ships rather than type and tonnage of the ships. Conclusions: ACMs were found from most ships built prior to 2000s. Therefore, measures for preventing asbestos-related diseases such as preparation of asbestos map on the ship and installation of warning signs, hazard communication with workers (ship-repairing workers, engine room workers and etc.), and follow-up for worker's health management are needed.

• 대한화장품학회지
• /
• 제34권1호
• /
• pp.43-50
• /
• 2008

세라마이드는 콜레스테롤, 지방산과 함께 각질층을 구성하는 주요성분으로 각질층의 피부장벽 기능에 중요한 역할을 하며, 아토피 피부염, 건선, 건성습진, 주부습진 등과 같은 염증성 피부질환 방지에 도움이 되는 것으로 알려져 있다. 본 연구에서 2-(2-amino-ethylamino)-ethanol(AEEA)을 출발물질로 하여 신규 유사세라마이드 BPC-16을 합성하고, 그 물리화학적 성질과 화장품의 신규 소재로 활용하기 위하여 세포독성, 보습, 각질제거효능 등을 평가하였다. 합성된 BPC-16을 이용하여 콜레스테롤, 스테아린산을 포함하는 에멀젼을 제조했고, 편광현미경에서 'Maltese Cross'를 확인함으로써 BPC-1이 라멜라 에멀젼을 형성함을 확인하였다. 단층배양세포와 삼차원배양세포에서의 세포독성 실험에서 BPC-16은 보습과 피부손상회복 효과를 보이는 10 mM 이하의 농도에서 독성이 없음을 확인하였다. BPC-16의 보습효능을 확인하기 위하여 Vapormeter와 Corneometer를 이용하여 임상실험을 실시하였으며, 우수한 효과를 확인할 수 있었다. 또한, 피부손상에 대한 회복효과와 Visioscan을 이용한 각질량의 변화 실험에서도 우수한 효과를 확인하였다.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.615-620
• /
• 2010

본 실험은 다섯 종류의 새로운 형태의 액정성 폴리우레탄을 4,4'-Bis(3-hydroxypropoxy)biphenyl (BP3)와 2,6-tolylene diisocyanate(2,6-TDI), 2,5-tolylene diisocyanate(2,5-TDI), 2,4-tolylene diisocyanate(2,4-TDI), 1,4-phenylene diisocyanate(1,4-PDI) 및 hexamethylene diisocyanate(HDI)의 중부가 반응에 의해 합성하였다. 단량체 BP3은 스멕틱상을 형성하였으며 HDI/BP3을 제외한 나머지 폴리우레탄에서는 모두 단방성 액정성을 나타내었다. 그러나 메틸 치환기를 가지고 있지 않는 1,4-PDI/BP3에서는 DSC 및 편광현미경에서도 액정상을 전혀 관찰할 수 없었다. 합성된 화합물의 구조는 FT-IR 및 $^1H$-NMR에 의해 확인하였으며, 그들의 열적 상전이온도 및 안정성들은 DSC, 편광현미경 및 x-선 회절에 의해 조사하였다.