• Journal of Power Electronics
• /
• v.3 no.2
• /
• pp.139-144
• /
• 2003

In this paper, 11 and 13 layered step-down piezoelectric transformers were fabricated and their electrical characteristics have been analyzed for AC-adapter. When the voltage is applied to the driving piezoelectric vibrator polarized in the longitudinal direction, the output voltage is generated at the generating piezoelectric vibrator polarized in the thickness direction due to the piezoelectric effects. From the piezoelectric direct and converse effects, symbolic expressions between the electric inputs and outputs of the step-down piezoelectric transformer are derived with an equivalent circuit model. With those expressions, load and frequency characteristics are discussed through the simulations. Output voltage and current from a 11-layered and a 13-layered piezoelectric transformers were measured under the different load and frequency conditions. First we measured resonant frequency from impedance curve and got equivalent impedance value of the piezoelectric transformer from admittance plot. It was shown from experiments that output voltage increase s and resonant frequency changes according to the various resistor loads. Output current decreases inversely proportional to the change of loads. Moreover, the measured output voltage and current are well matched with the simulated results obtained from the proposed equivalent circuit model. Furthermore, a new step-down piezoelectric transformer has been suggested to Increase the output power based on a simulation result having a driving piezoelectric vibrator polarized thickness direction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.343-346
• /
• 1998

The generation of pretilt angle in nematic liquid crystal (NLC) and electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-LCD with oblique P-polarized ultraviolet (UV) light irradiation on the two kinds of the soluble polyimide (PI) surfaces containing trifluoromethyl moieties were investigated. The generated pretilt angle of NLC is about 2.5$^{\circ}$with P-polarized UV light irradiation of 20$^{\circ}$on PI-3 surface at 20 min.; However pretilt angle of about 0.5$^{\circ}$are observed on PI-1 and PI-2 surfaces. The generated pretilt angle of NLC on PI-3 surface may be attributed to the trifluoromethyl moieties attached to the lateral benzene rings. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with P-polarized UV light irradiation of 20$^{\circ}$on PI-1 surface at 20 min were almost same in comparison with the rubbing-aligned TN-LCD. However, the high threshold voltage and slow response are observed on PI-3 surface. Also, the decay time $\tau$$\sub$d/ of photo-aligned TN-LCD is attributed to the anchoring energy of NLC.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.36-41
• /
• 2012

Polymethylmethacrylate powders are commonly used to improve the spreadability and blurring effects of powder foundation cosmetics. In this study, the opacity and haze effect of four types of polymethylmethacrylate powders and their 10wt% powder foundation formulation was evaluated. The distorted random hemispherical particulates with both concave and convex portions showed the highest haze and opacity value as a single powder substance. And as a formulated phase, the powder foundation formulation containing particulates with fine pores provided the highest haze and opacity value. We also examined the quantity of reflected light over the angular range $20-75^{\circ}$ by polarized light goniophotometry. The total reflected light intensity, surface-reflected light, and internally reflected light were characterized. These studies demonstrated that hemispherical PMMA powders produce natural brilliance by creating high internally reflected light which is similar to the total reflection profile of artificial skin.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.3-3
• /
• 2011

Since the first discovery of exchange anisotropy on Co/CoO system[1], there have been numerous studies to explore the physical origin of exchange-biased system[2,3]. In this presentation, we report that how the polarized neutron reflectomery can be applied to study the magnetization reversal behavior of the exchange biased system. As an example, the detailed magnetization reversal mechanism of the exchange-biased Py(30 nm)/FeMn (0, 15, 30 nm)/CoFe(30 nm) trilayers was studied and found that the 15 nm antiferromagnetic FeMn layer mediates the magnetization reversal behaviors of both Py and CoFe layers through interlayer exchange bias coupling. We also update the current activities in polarized neutron reflectometer in HANARO.

• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.61-68
• /
• 2007

Using modal transmission-line theory (MTLT), itexplores rigorously the polarization characteristics of TE-TM mode optical polarized beamsplitter with misaligned input interface. To verify the validity of the approach proposed in this paper, a novel polarization condition is defined, and it compares and evaluates with the polarization condition of coupled-mode theory (CMT) used widely. The numerical results reveal that the discontinuity of misaligned input interface has nothing to do with the polarization condition of beamsplitter. Furthermore, the condition of CMT is no longer effective at the asymmetric guiding structures with strong power coupling.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1213-1221
• /
• 2005

In this paper, dual-polarized antenna for UHF RFID reader has been described. Feeding network and antenna structure have been designed, such that both port isolation between transmitting and receiving port and cross-polarization be maximized, and overall antenna size be minimized as well. In addition, sequentially rotated feeding scheme has been adopted to secure axial ratio bandwidth in the circular polarization. Test results show 2.35 dBi antenna gain in 900 to 928 MHz frequency range and 150 MHz axial ratio bandwidth, respectively. And, the proposed antenna has a port isolation of -40 to -38 dB and a cross-polarization of -40 to -30 dB.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.63-68
• /
• 2005

In this paper, the single coaxial fed and circularly polarized patch antenna for the RFID system in 2.45GHz ISM band has been fabricated. The simulation by HFSS, electro-magnetic field simulator was executed in order to decide the location of feed which is difficult to be analysed. The simulated result has the same tendency as the measured one in the view of input impedance with the variation of feed location. VSWR of fabricated antenna is low($\leq$1.2) even in comparatively high dielectric loss epoxy substrate(FR4), and this value is enough for the application of RFID reader antenna.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.25-29
• /
• 2015

In 1987, M. K. Wu and Paul Chu discovered $Y_{1.2}Ba_{0.8}CuO_4$ (YBCO) with critical temperature ($T_c$) of 93 K. It has significantly lowered the cost of cooling of a material up to the point where superconductivity set in. Utilizing the cost reduction of attaining superconductivity and the vast amount of research to understand characteristics of high temperature oxide superconducting materials, there has been effort to use a high temperature superconductor as a coated conductor. It is important to characterize the materials precisely for stable performance before commercializing. We used polarized Raman scattering spectroscopy to study structural and stoichiometric information regarding $YBa_2Cu_3O_{7-x}$, $GdYBa_2Cu_3O_{7-x}$, and $GdBa_2Cu_3O_{7-x}$ produced by three leading groups of producing commercial grade high temperature superconductor coated conductors American Superconductor Corporation, Superpower, and SuNAM.

• BMB Reports
• /
• v.36 no.6
• /
• pp.565-571
• /
• 2003

The locomotor responses of human peripheral blood neutrophils and lymphocytes were measured by the change from spherical to polarized shapes in the presence of endotoxins (lipopolysaccharide, LPS) of enteric pathogens: S. dysenteriae type 1, V. cholerae Inaba 569B, S. typhimurium, and K. pneumoniae. We reported earlier that these endotoxins are chemotactic factors for the neutrophils since they stimulated cell polarization within a few minutes of incubation. Endotoxins had an inhibitory effect upon neutrophil phagocytosis of opsonized yeast and the cells engulfed fewer yeasts. Interestingly, endotoxins increased neutrophil adhesion to clean glass surfaces, but stimulated the cells to exhibit increased random locomotion (chemokinesis) through cellulose nitrate filters and show an enhanced ability to reduce nitroblue tetrazolium (NBT) dye. Unlike neutrophils, lymphocytes direct from blood do not show polarized morphology towards chemotactic factors but the cells acquire locomotor capacity during 24-72 h culture with mitogens such as phytohemagglutinin (PHA), phorbol myristate acetate or concanavalin A. Stimulation of blood lymphocytes with endotoxins did not induce cell polarization in short-term but long-term culture resulted in an increase in the proportion of polarized cells that acquired locomotor morphologies. The majority of these cells were identified as esterase negative B-lymphocytes that migrated through filters. Despite the optimum time of incubation for each of these cell types being different, we found that lymphocytes respond to much lower concentrations of endotoxins than the neutrophils. These findings suggest that endotoxins of enteric pathogens modulate the functions of human blood neutrophils and lymphocytes.