• 한국전자파학회논문지
• /
• 제9권3호
• /
• pp.410-418
• /
• 1998

밀리미터파대역의 강우감쇄와 교차편파를 여러 나라의 측정치와 비교하였다. 그리고 국내환경에 적용할 수 있도록 $\tau$분 강우율을 1분 가우율롤 변환할 수 있는 변환모델을 제시하였다. 변환한 국내의 가웅율 데이타를 이요하여, 강우감쇄와 교차편파의 확률분포를 다양한 모델을 이용하여 계산하고, 그 결과를 서로 비교하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.120-123
• /
• 1999

This paper presents the design method of EMC(Electromagnetic Coupling) microstrip array antenna for CS(Communication Satellite) system. Microstrip dipole antennas are attractive elements owing to the desirable properties such as simplicity, small size and linear polarization. From the optimum simulation results by the FDTD method[1], design parameters such as EMC dipole length, width, height and offset are discussed at 12CHz. The array characteristics of 5-elements and 10-elements array are also presented. By adjusting geometry of model antenna, we can design dual polarization EMC microstrip dipole antenna for CS system. Direction of nam beam is easily tilted by the control of distance between dipole elements.

• 한국정보통신학회논문지
• /
• 제5권4호
• /
• pp.812-816
• /
• 2001

본 논문에서는 마이크로스트립 선로로 급전되는 원형 섹터 마이크로스트립 안테나를 사용하여 서로 수직한 편파 특성을 갖는 이중주파수 안테나를 설계하였다. 공진기 모델을 사용하여 여기되는 모드를 계산하였고 안테나의 동작주파수 및 편파 특성을 살펴보았다. 1.87 GHz대와 2.42 GHz 대역에서 동작하는 이중주파수 안테나를 제작하여 S-파라미터 및 복사패턴을 측정하였다. 다음은 요약문 입니다.

• Membrane and Water Treatment
• /
• 제7권2호
• /
• pp.127-141
• /
• 2016

Electrodialysis (ED) is known to be a useful membrane process for desalination, concentration, separation, and purification in many fields. In this process, it is desirable to work at high current density in order to achieve fast desalination with the lowest possible effective membrane area. In practice, however, operating currents are restricted by the occurrence of concentration polarization phenomena. Many studies showed the occurrence of a limiting current density (LCD). The limiting current density in the electrodialysis process is an important parameter which determines the electrical resistance and the current utilization. Therefore, its reliable determination is required for designing an efficient electrodialysis plant. The purpose of this study is the development of a predictive model of the limiting current density in an electrodialysis process using response surface methodology (RSM). A two-factor central composite design (CCD) of RSM was used to analyze the effect of operation conditions (the initial salt concentration (C) and the linear flow velocity of solution to be treated (u)) on the limiting current density and to establish a regression model. All experiments were carried out on synthetic brackish water solutions using a laboratory scale electrodialysis cell. The limiting current density for each experiment was determined using the Cowan-Brown method. A suitable regression model for predicting LCD within the ranges of variables used was developed based on experimental results. The proposed mathematical quadratic model was simple. Its quality was evaluated by regression analysis and by the Analysis Of Variance, popularly known as the ANOVA.

• Coupled systems mechanics
• /
• 제10권6호
• /
• pp.521-544
• /
• 2021

In this work, we present the development of a 3D lattice-type model at microscale based upon the Voronoi-cell representation of material microstructure. This model can capture the coupling between mechanic and electric fields with non-linear constitutive behavior for both. More precisely, for electric part we consider the ferroelectric constitutive behavior with the possibility of domain switching polarization, which can be handled in the same fashion as deformation theory of plasticity. For mechanics part, we introduce the constitutive model of plasticity with the Armstrong-Frederick kinematic hardening. This model is used to simulate a complete coupling of the chosen electric and mechanics behavior with a multiscale approach implemented within the same computational architecture.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.19-30
• /
• 2013

This study is to evaluate the use of dual-polarization radar data for storm runoff modeling in Namgang dam (2,293 $km^2$) watershed using KIMSTORM (Grid-based KIneMatic wave STOrm Runoff Model). The Bisl dual-polarization radar data for 3 typhoons (Khanun, Bolaven, Sanba) and 1 heavy rain event in 2012 were obtained from Han River Flood Control Office. Even the radar data were overall less than the ground data in areal average, the spatio-temporal pattern between the two data was good showing the coefficient of determination ($R^2$) and bias with 0.97 and 0.84 respectively. For the case of heavy rain, the radar data caught the rain passing through the ground stations. The KIMSTORM was set to $500{\times}500$ m resolution and a total of 21,372 cells (156 rows${\times}$137 columns) for the watershed. Using 28 ground rainfall data, the model was calibrated using discharge data at 5 stations with $R^2$, Nash and Sutcliffe Model Efficiency (ME) and Volume Conservation Index (VCI) with 0.85, 0.78 and 1.09 respectively. The calibration results by radar rainfall showed $R^2$, ME and VCI were 0.85, 0.79, and 1.04 respectively. The VCI by radar data was enhanced by 5 %.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.383-392
• /
• 2015

해저터널 건설 중 터널 굴착면 전방에 존재하는 고수압 조건의 함수대 (또는 포화상태의 파쇄대)의 상태를 정확히 예측하는 것은 터널 안전시공의 핵심적인 요소이다. 이 연구는 해저터널 굴착면에서 전방지반의 상태를 예측하기 위해 유도분극(Induced Polarization, IP) 탐사의 활용 가능성을 입증하였다. 모래지반에서의 충전성(chargeability)을 산정하기 위해 간극모델을 제안하고, 충전성과 이에 영향을 미치는 변수들 사이의 관계식을 유도하였다. 관계식을 사용하여 매개변수 분석을 실시하였으며 그 결과 입자 사이의 간극 중 좁은 간극($r_1$)의 크기와 간극수의 염도가 충전성에 가장 큰 영향을 미쳤다. 또한, 실내실험으로 유도분극 현상에 영향을 미치는 지반조건을 파악하기 위해 간극수의 염도와 파쇄대의 두께 변화 그리고 가우지(gouge) 존재 여부에 따른 충전성과 전기비저항의 변화 추이를 규명하고자 하였다. 그 결과 파쇄대의 절리 사이에 가우지가 충진된 경우, 해수조건에서도 충전성이 높게 나타났다. 이는 가우지가 좁은 간극($r_1$)의 크기를 감소시키기 때문이라고 판단된다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권3호
• /
• pp.125-135
• /
• 2009

An analytical 2-dimensional model to explain the small signal and noise properties of an AlGaN/GaN modulation doped field effect transistor has been developed. The model is based on the solution of two-dimensional Poisson's equation. The developed model explains the influence of Noise in ohmic region (Johnson noise or Thermal noise) as well as in saturated region (spontaneous generation of dipole layers in the saturated region). Small signal parameters are obtained and are used to calculate the different noise parameters. All the results have been compared with the experimental data and show an excellent agreement and the validity of our model.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권4호
• /
• pp.279-293
• /
• 2023

This study investigates network effects to measure how strongly the early adopters affect the brand choice of the potential consumer. By using the Gumbel-Hougaard (GH) copula, this study checks the magnitude of network effects varied from country to country. To consider consumer heterogeneity and network effects in the growth market, this study proposes the multi-brand Gamma/Shifted-Gompertz (m-G/SG) model based on the GH copula. Out of eighteen Western European cellular phone market data and South Korea smartphone data sets, the m-G/SG model provides an improvement in the estimation accuracy over the Libai, Muller, and Peres model. The results show that network effects enhance (i) the polarization of brand choice probabilities as time elapses; (ii) the dominance of the more preferred and the earlier entered brand; and (iii) the deceleration of category-level diffusion. Potential followers can analyze their relationship with earlier entrants through the m-G/SG model and also establish an optimal market entry strategy.