• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.408-411
• /
• 2004

The presence of voids behind tunnel linings results in their deterioration. One proposed method of effectively detecting such voids by non-destructive means is radar. This research is devoted to quantitatively evaluating the efficiency of such non-destructive tests with radar. As a foundation to this ongoing research, which aims to acquire directional information and estimate the shape of specific voids using radar of three-dipole antenna type, an investigation of microwave polarization methods is carried out with various void orientations and void geometries. As the results, it is clarified that the response of microwave polarization modes depends on void geometry and thus there is a possibility of identifying the geometry and orientation of specific voids using radar of three-dipole antenna type.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1607-1610
• /
• 2005

A new configuration of LCD projectors for polarized stereoscopic projection having no light loss in the polarization process is suggested. In the proposed system, two polarizing filters that are employed in the conventional LCD polarized stereoscopic projection system causing additional light loss and image distortion are excluded by taking into account of polarization property of the LCD projector and image processing techniques. From some experimental results by using the Type-1 LCD projectors, light loss of the proposed system occurring in the polarization process is found to be zero.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.111-117
• /
• 2014

With the development of technology, the display industry has been focusing on the development of new types of displays, such as bendable and wearable displays. However, the PVA/TAC polarizing film used in the manufacturing of a normal display is associated with low luminance and low efficiency. If the existing polarization film is replaced with a wire grid polarizer, it is possible to reduce the thickness significantly. Moreover enhanced brightness can also be expected. This study confirms the optical properties of the WGP through a simulation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.205-210
• /
• 2005

A new configuration of LCD projectors for polarized stereoscopic projection having no light loss in the polarization process is suggested. In the proposed system, two polarizing filters that are employed in the conventional LCD polarized stereoscopic projection system causing additional light loss and image distortion are excluded by taking into account of polarization property of the LCD projector and image processing techniques. From some experimental results by using the Type-1 LCD projectors of NEC MT 1060R, light loss of the proposed system occurring in the polarization process is found to be zero and the resultant stereoscopic video image projected from this system is also found to be 213%, 75% and 300% brighter than those projected from the conventional Type-1 LCD projector-based, Type-2 LCD projector-based and Type-3 projector-based systems, respectively.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1861-1863
• /
• 1999

The polarization gratings were fabricated in chalcogenide $As_{40}Ge_{10}Se_{15}S_{35}$ thin film applicable to a medium of the polarization holography and their diffraction efficiencies$(\eta)$ were monitored by real-time measurement. The polarization gratings prepared consisted of the multi-layer thin film system. As a method to improve the $\eta$, we have investigated its change for the field effect. As the results, the value of $\eta$ strongly depended on the voltage applied to the film and the maximum value, $\eta_{max}$ was enhanced to be about 4 times in comparison with that of not biased sample. In addition, an increase in the $\eta$ can be estimated to be due to additional creation of new defects caused by the electric field across the film.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.696-696
• /
• 2013

Solid Oxide Fuel Cells (SOFCs) have been gaining academic/industrial attention due to the unique high efficiency and minimized pollution emission. SOFCs are an electrochemical system composed of dissimilar materials which operates at relatively high temperatures ranging from 800 to 1000oC. The cell performance is critically dependent on the inherent properties and integration processing of the constituents, a cathode, an electrolyte, an anode, and an interconnect in addition to the sealing materials. In particular, the gas transport, ion transport, and by-product removal also affect the cell performance, in terms of open cell voltages, and cell powers. In particular, the polarization of cathode materials is one of the main sources which affects the overall function in SOFCs. Up to now, there have been studies on the materials design and microstructure design of the component materials. The current work reports the effect of thin film processing on cathode polarization in solid oxide fuel cells. The polarization issues are discussed in terms of dc- and ac-based electrical characterizations. The potential of thin film processing to the applicability to SOFCs is discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1018-1025
• /
• 2011

The improved properties of corrosion for 90Cu10NiFe alloy in natural seawater were explained by sodium diethyl dithio carbamate(NaDDC), namely organic compound, which is reagent for heavy metal extractions of waste water. The efficiency of NaDDC as corrosion inhibitor for 90Cu10NiFe alloy has been investigated in seawater after immersion in various concentrations of NaDDC solutions for 12~36hrs at pH 8.2 by weight loss test and electrochemical techniques including potentiodynamic polarization and SEM-EDS measurements. The results showed that the corrosion resistance of 90Cu10NiFe alloy improves with the increasing concentration of NaDDC but it did not improves with increasing time any more, so the highest inhibition efficiency was 93% at 100mg/L, 36hrs. The results obtained from weight losses and corrosion rates in polarization curve measurements were in good agreement. Therefore, it showed that NaDDC is a good inhibitor for copper corrosion of 90Cu10NiFe alloy.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.295-302
• /
• 2007

This paper presents a rigorous comparison of the design characteristics of polarization-insensitive directional coupler (DC) and multimode interference (MMI) coupler based on rib type waveguides, by using longitudinal modal transmission-line theory (L-MTLT). It shows that the multimode mixing and interference property of MMI can be structurally designed through the continuous evolution of the two-mode coupling property of DC. It also compares and analyzes the coupling efficiency along with the coupling length and the wavelength between polarization-insensitive DC and MMI. From the design properties obtained, it demonstrates for the first time the integration of polarization-insensitive DC or MMI with a Bragg grating and evaluates precisely the filtering characteristics. The numerical results reveal that the DC, as long as it is designed to have the same coupling length for TE and TM modes, has better performance than the MMI in polarization-insensitive filtering behaviour. However, it shows that the MMI with much less coupling length than DC is preferred in the miniaturization of integrated devices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.239-244
• /
• 2016

The polarization characteristics of polarization-insensitive directional coupler based on double sandwiched rib-type and curved waveguides are explored in detail by using conformal transformation method (CTM) and longitudinal modal transmission-line theory(L-MTLT). To obtain the polarization-insensitive condition of polarization-insensitive curved directional coupler(PI-CDC), the coupling length and coupling efficiency according to the inner radius of PI-CDC are analyzed for quasi-TE and quasi-TM modes. The numerical results show that the PI-CDC with a few micrometer scales can be realized by properly choosing the curvature and structural and material parameters of double sandwiched layers. Furthermore, the mode profiles propagating through PI-CDC are evaluated, and the influence on coupler performance has been investigated.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.2
• /
• pp.155-160
• /
• 2008

In this study, the nitrate removal efficiency was examined under a variety of operating conditions, such as different doses of the reducing agent, different electrode types, different HRTs(hydraulic retention times), and different current densities, using the multistep electrochemical process. The nitrate removal efficiency increased and the input energy decreased when the reducing agent was used, and almost no difference was found between the electrode types in terms of their nitrate removal efficiency and current efficiency. So that the Zn reducing agent could be recovered, though, the B-type electrode was chosen(step 1: Pt-Zn; step 2: Pt-Zn; step 3: Pt-Zn; step 4: Pt-Zn). HRT experiments were carried out on constant electric current density unrelated HRTs and various electric current density related HRTs: the constant amount of electric current per unit volume. As a result, HRT and the electric current density caused concentration polarization and the lack of an applied current. That is to say,the lower the HRT, the greater the decrease in concentration polarization and in the amount of applied current per unit volume. Therefore, optimal conditions were found through the experiments that were conducted on HRT and electric current density. When a spacer was installed in the process, the nitrate removal efficiency and energy efficiency increased even more because the diffusion likewise increased.