• 자연과학논문집
• /
• 제17권1호
• /
• pp.31-37
• /
• 2006

We have found that the polarization mode coupling between the orthogonally linearly polarized dual mode laser results from the anisotropy of dipole moments. Rate equation analysis demonstrated that high anisotropy in dipole moment components can give rise to law intrinsic mode coupling constants while isotropic dipole moment components give high intrinsic mode coupling constant. The populations at active ion sites are shown to self-organize the populations such that laser mode gain is constant adove threshold while the gain contributions from the each site adjust themselves with pump power.

• 천문학회보
• /
• 제28권1호
• /
• pp.85-85
• /
• 2003

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.411-419
• /
• 1999

에너지 변환설비와 관련된 기계구조물의 내열재료는 $350^{\circ}C{\sim}550^{\circ}C$의 온도범위에서 장시간 사용되는데 이때 조직의 결정입계에는 불순물 원소(P, Sn, Sb등)의 편석과 탄화물의 석출 등으로 인하여 재료의 취화 현상이 발생되고, 그로 인해 입계강도의 저하가 초래된다. 따라서 노후화된 고온설비의 안전성 및 효율적인 운전조건을 확보하고, 취성파괴 방지를 위해서는 취화손상의 정량적 평가는 매우 중요하다. 그러나 가동중인 고온설비에서 파괴시험을 위한 대량의 시험편채취가 거의 불가능한 경우가 대부분이므로 비파괴적인 시험방법이 요구된다. 본 연구에서는 인공시효열처리된 2.25Cr-1Mo강의 비파괴적인 취화손상도 평가를 위해 적정 부식환경하에서 전기화학적 분극시험 방법에 의한 최적의 평가인자를 조사하였다. 또한 전기화학 시험결과들은 준비파괴시험인 SP시험에 의한 취화도 평가결과와 비교되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 하계학술발표회
• /
• pp.28-29
• /
• 2000

Optical power splitters and/or couplers are important components for optical signal distribution between channels both in wavelength division multiplexing(WDM) systems and photonic integrated circuits(PICs). Since polarization is usually not known after propagation in an optical fiber, passive WDM components have to be polarization insensitivity, Compared to alternatives such as directional couplers or Y-junction splitters, splitters based on multimode interference(MMI) have found a growing interest in recent yens because of their desirable characteristics, such as compact size, low excess loss, wide bandwidth, polarization independence, and relaxed fabrication tolerances$^{(1)}$ . These devices have been fabricated in polymers, silica, or III-V semiconductor materials. A1 $\times$ 4 MMI power splitter on InP materials that were suitable for application in the 1.55-${\mu}{\textrm}{m}$ region$^{(2)}$ . However, the fabrication process of the structure is too complicated and the photolithography tolerance is very tight. Also, a 1 $\times$ 16 InGaAsP/InP MMI power splitter with an excess loss of 2.2dB and a splitting ratio of 1.5dB was demonstrated by using deep etching$^{(3)}$ . The deep etching of the sidewalls through the entire guide layer of the slab waveguide resulted in a number of drawbacks$^{(4)}$ . (omitted)

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1039-1046
• /
• 2001

Among the automotive steering systems, an Electric Power Assisted steering (EPAS) system utilizes an electronically controlled electric motor to provide steering assistance to the driver. The key components of the EPAS system are torque sensor, ECU (Electronic Control Unit), and DC Motor. The most important component of the EPAS is the torque sensor. The conventional torque sensor has complicated mechanical mechanism of torque detection. However, we suggest a non-contact torque sensor for EPAS using Maluss polarization law. It was found that the sensor exhibited not only excellent linearity but also superior characteristics of hysteresis, temperature and vibration.

• Journal of the Optical Society of Korea
• /
• 제14권3호
• /
• pp.228-234
• /
• 2010

This paper presents the joint characteristic function of the first- and second-order polarization-modedispersion (PMD) vectors in installed optical fibers that are almost linearly birefringent. The joint characteristic function is a Fourier transform of the joint probability density function of these PMD vectors. We regard the random fiber birefringence components as white Gaussian processes and use a Fokker-Planck method. In the limit of a large transmission distance, our joint characteristic function agrees with the previous joint characteristic function obtained for highly birefringent fibers. However, their differences can be noticeable for practical transmission distances.

• 한국광학회지
• /
• 제8권2호
• /
• pp.161-164
• /
• 1997

편광유지 광섬유를 이용한 주파수가 안정화된, 두 개의 서로 수직으로 편광된 종모우드를 갖는 He-Ne레이저 빛을 LoTa $O_{3}$ 위상변조기로 구성된 센서부(sensor head)로 전달해 줌으로써 원격에서 전기장을 측정할 수 있는 hybrid, heterodyne 간섭식 센서를 구성하였다. In/quadrature-phase위상변조풀이 방식을 이용하여 전기광학 효과에 의해 서로 수직으로 편광된 두 모우드 사이에 유도된 위상차이를 측정함으로써 항상 높은 검지율을 유지할 수 있는 전기장 센서를 구성하고, 이를 이용하여 광학 물질에 유도된 복굴절도 측정을 할 수 있었다.

• Corrosion Science and Technology
• /
• 제13권1호
• /
• pp.15-19
• /
• 2014

Recently, anti-fouling paints which does not include the poison components such as tin(Sn), copper(Cu) have been increasingly developed in order to inhibit the environmental contamination of the sea water. Moreover, the wear ratios of these anti-fouling paints are very important problem to prolong their life time in economical point of view. In this study, five types of anti-fouling paints as self polishing type were investigated on the relationship between their polarization characteristics and wear ratios. It was verified that there was apparently a good relationship between the wear ratio and polarization characteristics, for example, the wear ratio increased with increasing the impedance ratio, and increased or decreased with the corrosion potential shifting in the negative or positive direction respectively. In addition, the wear ratio decreased with decreasing the corrosion current density. Consequently, it is suggested that we can qualitatively expect the wear ratio by only measuring the polarization characteristics. Therefore, before the examination of the wear ratio was actually carried out in the field, the evaluation of polarization property in the laboratory may give a available reference data for their developments.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.451-452
• /
• 2006

• International Journal of Concrete Structures and Materials
• /
• 제1권1호
• /
• pp.83-88
• /
• 2007

This paper discusses a method of measuring transient potential response of a corrosion interface to a small galvanostatic pulse perturbation for a rapid assessment of the corrosion rate of reinforcing steel in concrete structures. Measurements were taken on 100 mm sections of steel bars which were subjected to a wide range of corrosion conditions, from passive steel to actively corroding steel. The duration of the applied galvanostatic pulse was varied between 5s and 180s, and the lateral distance of the point of measurement on the steel bar varied from zero to 400 mm. The result of the electrochemical transient response was investigated using a typical sampling rate of 1 kHz. Analysis of the transient potential response to the applied galvanostatic pulse has enabled the separation of equivalent electronic components so that the components of a series of capacitances and resistances, whose values are dependent on the corrosion condition of the reinforcing steel, could be isolated. The corrosion rate was calculated from a summation of the separate resistive components, which were associated with the corrosion interface, and was compared with the corrosion rate obtained from linear polarization resistance (LPR) method. The results show that the galvanostatic pulse transient technique enables the components of the polarization resistance to be evaluated separately so as to give more reliable corrosion rate values than those obtained from the LPR method. Additionally, this paper shows how the galvanostatic pulse transient response technique can be implemented. An appropriate measurement time for passive and actively corroding reinforcing steel is suggested for the galvanostatic pulse transient response measurements in the field site.