• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1493-1515
• /
• 2015

A new refined hyperbolic shear deformation theory (RHSDT), which involves only four unknown functions as against five in case of other shear deformation theories, is presented for the thermoelastic bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson's ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. The influences played by the transverse shear deformation, thermal load, plate aspect ratio and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal-ceramic plates are investigated. It can be concluded that the proposed theory is accurate and simple in solving the thermoelastic bending behavior of functionally graded plates.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.695-700
• /
• 2010

Material properties of the lock plate, which covers the gas-turbine blade, are studied using ultrasonic guided waves. The lock plate is a crucial part of a gas-turbine power plant. The wave velocity and attenuation coefficient are measured to investigate the changes in the material properties under three heat-treatment conditions. Compared to the destructive mechanical tests, the material characterization of Inconel X-750 can be performed more efficiently and nondestructively by using ultrasonic guided waves; this characterization helps identify the changes occurring in its elastic moduli and Poisson's ratio under different heat-treatment conditions. The wave velocity and hardness of Inconel X-750 are proportional to each other. This nondestructive technique for the measurement of material properties can be widely used in various industries to avoid catastrophic failure. It is also expected that the guided-wave technique can be applied as a new cost- and time-saving inspection tool for longer and wider inspection ranges.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.91-102
• /
• 1990

The representative tests in this study are performed at a selected site which has the soil layers to analyze the safety and economy of the dynamic analysis for the variable soil conditions. Crosshole test and downhole test of small strain level tests and triaxial test of large strain level test are performed in the soil layers, and in the rock layers, crosshole test and downhole in-situ tests and laboratory sonic test are performed to measure the dynamic shear modulus, damping ratio, and Poisson$\acute{s}$ ratio of the soil and the rock. The correlations between the dynamic soil properties from the tests and the basic soil properties are determined through the regression analysis. The representative design value of the soil is determined by probability analysis of the test results. It is determined from the nonlinear stress-strain model in soils, and the value at small strain level is computed in rocks according to the distribution of the type of soils and the affecting variables. The constitutive value is systematized to be utilized in the analysis of the test results, and computation of the input soil data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.367-380
• /
• 2013

In this paper, an analytical threshold voltage model is developed for a short-channel double-material-gate (DMG) strained-silicon (s-Si) on silicon-germanium ($Si_{1-X}Ge_X$) MOSFET structure. The proposed threshold voltage model is based on the so called virtual-cathode potential formulation. The virtual-cathode potential is taken as minimum channel potential along the transverse direction of the channel and is derived from two-dimensional (2D) potential distribution of channel region. The 2D channel potential is formulated by solving the 2D Poisson's equation with suitable boundary conditions in both the strained-Si layer and relaxed $Si_{1-X}Ge_X$ layer. The effects of a number of device parameters like the Ge mole fraction, Si film thickness and gate-length ratio have been considered on threshold voltage. Further, the drain induced barrier lowering (DIBL) has also been analyzed for gate-length ratio and amount of strain variations. The validity of the present 2D analytical model is verified with ATLAS$^{TM}$, a 2D device simulator from Silvaco Inc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.69-76
• /
• 2016

In this paper, we investigate the system performance of a cooperative relaying system of Non-orthogonal multiple access (NOMA) with successive interference cancellation (SIC), which is considered promising application in fifth generation (5G) cellular networks. Previous studies have focused on the selected relays, however we include the maxmin relay selection and derive analytical outage probability of opportunistic incremental relaying systems. For the realistic mobile environment, the distributions of relays are modeled as a homogeneous Poisson point process (PPP). And maximal ratio combining (MRC) is adapted to improve the system performance at the destination node. Analytical results demonstrate the outage probability improves with the near/far user power ratio, and the cooperative relaying scheme can achieve low outage probability in comparison to the no relaying scheme. It is also conformed that the increase of the intensity of PPP cause higher gains of the spacial diversity and hence the performance improves.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2783-2787
• /
• 2013

To assess the risk of cancer incidence after medical radiation exposure for coronary artery disease (CAD), a retrospective cohort study was conducted based on Taiwan's National Health Insurance Research Database (NHIRD). Patients with CAD were identified according to the International Classification of Diseases code, 9th Revision, Clinical Modification (ICD-9-CM), and their records of medical radiation procedures were collected from 1997 to 2010. A total of 18,697 subjects with radiation exposure from cardiac imaging or therapeutic procedures for CAD were enrolled, and 19,109 subjects receiving cardiac diagnostic procedures without radiation were adopted as the control group. The distributions of age and gender were similar between the two populations. Cancer risks were evaluated by age-adjusted incidence rate ratio (aIRR) and association with cumulative exposure were further evaluated with relative risks by Poisson regression analysis. A total of 954 and 885 subjects with various types of cancers in both cohorts after following up for over 10 years were found, with incidences of 409.8 and 388.0 per 100,000 person-years, respectively. The risk of breast cancer (aIRR=1.85, 95% confidence interval: 1.14-3.00) was significantly elevated in the exposed female subjects, but no significant cancer risk was found in the exposed males. In addition, cancer risks of the breast and lung were increased with the exposure level. The study suggests that radiation exposure from cardiac imaging or therapeutic procedures for CAD may be associated with the increased risk of breast and lung cancers in CAD patients.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.3
• /
• pp.233-238
• /
• 2007

Objectives : We aimed to assess the relationship between long-term exposure to air pollution and lung cancer in the Republic of Korea. Methods : Using the Annual Report of Ambient Air Quality in Korea, Annual Report of National Cancer Registration, and Annual Report on the Cause of Death Statistics, we calculated the standardized mortality ratio (SMR) and standardized incidence ratio (SIR) of lung cancer for both sexes in 74 areas from 7 Korean metropolitan cities. We performed random intercept, Poisson regression using empirical Bayes method. Results : Both SMRs and SIRs in the 7 metropolitan cities were higher in women than in men. Mean SIRs were 99.0 for males and 107.0 for females. The association between $PM_{10}$ and lung cancer risk differed according to gender. $PM_{10}$ was not associated with the risk of lung cancer in males, but both incidence and mortality of lung cancer were positively associated with $PM_{10}$ in females. The estimated percentage increases in the rate of female lung cancer mortality and incidence were 27% and 65% at the highest $PM_{10}$ category $({\geq}70\;{\mu}g/m^3)$, compared to the referent category $({\geq}50\;{\mu}g/m^3)$. Conclusions : Long-term exposure to $PM_{10}$ was significantly associated with female lung cancer incidence in 7 Korean metropolitan cities. Further study is undergoing to estimate the relative risk of $PM_{10}$ using multi-level analysis for controlling individual and regional confounders such as smoking and socioeconomic position.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.623-631
• /
• 2007

In this paper, dynamic elastic module of banded gneiss were calculated on the basis of SPS velocity logging data obtained from a geotechnical test-hole in Pungsan-dong, Hanam, Gyeonggi Province, Korea. This study mainly focuses on the velocity analysis, Q factor calculation relative to attenuation factor, and generation of crack information and its relation with seismic velocity. As a result, P-wave and S-wave velocity of fresh hard rock was 5,559m/s and 3,063m/s, respectively, with Poisson's ratio being 0.28. With these results, dynamic modules were prepared, and crack information analyzed by acoustic televiewer was incorporated to identify the correlation among and between delay of first arrival by crack amplitude ratio, and velocity. The results of this study revealed that the analyzed logging hole mainly consisted of micro crack and a number of cracks and the size of crack aperture, functioned as a variable to seismic velocity in the micro crack area of this type of hard rock.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.92-100
• /
• 2012

Objectives: The French National Occupational Diseases Surveillance and Prevention Network (RNV3P) is a French network of occupational disease specialists, which collects, in standardised coded reports, all cases where a physician of any specialty, referred a patient to a university occupational disease centre, to establish the relation between the disease observed and occupational exposures, independently of statutory considerations related to compensation. The objective is to compare the relevance of disproportionality measures, widely used in pharmacovigilance, for the detection of potentially new disease ${\times}$ exposure associations in RNV3P database (by analogy with the detection of potentially new health event ${\times}$ drug associations in the spontaneous reporting databases from pharmacovigilance). Methods: 2001-2009 data from RNV3P are used (81,132 observations leading to 11,627 disease ${\times}$ exposure associations). The structure of RNV3P database is compared with the ones of pharmacovigilance databases. Seven disproportionality metrics are tested and their results, notably in terms of ranking the disease ${\times}$ exposure associations, are compared. Results: RNV3P and pharmacovigilance databases showed similar structure. Frequentist methods (proportional reporting ratio [PRR], reporting odds ratio [ROR]) and a Bayesian one (known as BCPNN for "Bayesian Confidence Propagation Neural Network") show a rather similar behaviour on our data, conversely to other methods (as Poisson). Finally the PRR method was chosen, because more complex methods did not show a greater value with the RNV3P data. Accordingly, a procedure for detecting signals with PRR method, automatic triage for exclusion of associations already known, and then investigating these signals is suggested. Conclusion: This procedure may be seen as a first step of hypothesis generation before launching epidemiological and/or experimental studies.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.171-177
• /
• 2008

As the risk of traffic accidents caused by mists emerged as a social problem, recently safety facilities to be prepared for mists are being actively installed when designing roads. But in some part, the facilities are being installed imprudently without analyzing the extent of occurrences of mists that would increase the risk of traffic accidents and appropriate countermeasures against the occurrences of mists are not being suggested. For that reason, in this study, first questionnaire surveys were executed on road users in order to draw the factors affecting the traffic accidents caused by mists, a mist traffic accident predicting model was developed and an accident seriousness determining model that can determine accident seriousness was developed. In this way, by extracting major factors affecting mist traffic accidents to grasp risk factors in roads to be caused by mists, safety of roads can be enhanced and traffic accidents in road operations can be decreased. As the affecting factors influencing mist traffic accidents, were extracted sightable distances, durations of mists and whether daytime or nighttime as major factors and the plan to install the facilities for the prevention of mist traffic accidents was suggested to prevent the traffic accidents to be caused by those factors and also the plan to operate roads considering sightable distances was suggested to solve the problem of insufficient sightable distances to be caused by mists was suggested. It is judged that the road safety in the areas where mists occur can be improved through foregoing methods.