[KSCI] Korea Science Citation Index Service

http://dx.doi.org/10.12989/scs.2015.18.6.1493

Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory

Bouchafa, Ali (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department)
Bouiadjra, Mohamed Bachir (Laboratoire des Structures et Materiaux Avances dans le Genie Civil et Travaux Publics, Universite de Sidi Bel Abbes, Faculte de Technologie, Departement de genie civil)
Houari, Mohammed Sid Ahmed (Laboratoire des Structures et Materiaux Avances dans le Genie Civil et Travaux Publics, Universite de Sidi Bel Abbes, Faculte de Technologie, Departement de genie civil)
Tounsi, Abdelouahed (Material and Hydrology Laboratory, University of Sidi Bel Abbes, Faculty of Technology, Civil Engineering Department)

Publication Information

Steel and Composite Structures / v.18, no.6, 2015 , pp. 1493-1515 More about this Journal

Abstract

A new refined hyperbolic shear deformation theory (RHSDT), which involves only four unknown functions as against five in case of other shear deformation theories, is presented for the thermoelastic bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The sandwich plate faces are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson's ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Several kinds of sandwich plates are used taking into account the symmetry of the plate and the thickness of each layer. The influences played by the transverse shear deformation, thermal load, plate aspect ratio and volume fraction distribution are studied. Numerical results for deflections and stresses of functionally graded metal-ceramic plates are investigated. It can be concluded that the proposed theory is accurate and simple in solving the thermoelastic bending behavior of functionally graded plates.

Keywords

hyperbolic plate theory; thermoelastic bending response; functionally graded material; sandwich plate;

Citations & Related Records

Times Cited By KSCI : 7 (Citation Analysis)

Reference
Cited By KSCI

1	Ait Amar Meziane, M., Abdelaziz, H.H. and Tounsi, A. (2014), "An efficient and simple refined theory for buckling and free vibration of exponentially graded sandwich plates under various boundary conditions", J. Sandw. Struct. Mater., 16(3), 293-318. DOI
2	Ait Yahia, S., Ait Atmane, H., Houari, M.S.A. and Tounsi, A. (2015), "Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories", Struct. Eng. Mech., Int. J., 53(6), 1143-1165. DOI
3	Attia, A., Tounsi, A., Adda Bedia, E.A. and Mahmoud, S.R. (2015), "Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories", Steel Compos. Struct., Int. J., 18(1), 187-212. DOI
4	Bachir Bouiadjra, R., Adda Bedia, E.A. and Tounsi, A. (2013), "Nonlinear thermal buckling behavior of functionally graded plates using an efficient sinusoidal shear deformation theory", Struct. Eng. Mech., Int. J., 48(4), 547-567. DOI
5	Belabed, Z., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Anwar Beg, O. (2014), "An efficient and simple higher order shear and normal deformation theory for functionally graded material (FGM) plates", Compos.: Part B, 60, 274-283. DOI
6	Benachour, A., Daouadji, H.T., Ait Atmane, H., Tounsi, A. and Meftah, S.A. (2011), "A four variable refined plate theory for free vibrations of functionally graded plates with arbitrary gradient", Compos. Part B, 42(6), 1386-1394. DOI
7	Bessaim, A., Houari, M.S.A., Tounsi, A., Mahmoud, S.R. and Adda Bedia, E.A. (2013), "A new higher-order shear and normal deformation theory for the static and free vibration analysis of sandwich plates with functionally graded isotropic face sheets", J. Sandw. Struct. Mater., 15(6), 671-703. DOI
8	Bouderba, B., Houari, M.S.A. and Tounsi, A. (2013) "Thermomechanical bending response of FGM thick plates resting on Winkler-Pasternak elastic foundations", Steel Compos. Struct., Int. J., 14(1), 85-104. DOI ScienceOn
9	Bourada, M., Tounsi, A., Houari, M.S.A. and Adda Bedia, E.A. (2012), "A new four-variable refined plate theory for thermal buckling analysis of functionally graded sandwich plates", J. Sandw. Struct. Mater., 14(1), 5-33. DOI
10	Bourada, M., Kaci, A., Houari, M.S.A. and Tounsi, A. (2015), "A new simple shear and normal deformations theory for functionally graded beams", Steel Compos. Struct., Int. J., 18(2), 409-423. DOI
11	Curiel Sosa, J.L., Anwar Beg, O. and Liebana Murillo, J.M. (2013), "Finite element analysis of structural instability using a switching implicit-explicit technique", Int. J. Comp. Method. Eng. Sci. Mech., 14(5), 452-464. DOI
12	Bousahla, A.A., Houari, M.S.A., Tounsi, A. and Adda Bedia, E.A. (2014), "A novel higher order shear and normal deformation theory based on neutral surface position for bending analysis of advanced composite plates", Int. J. Comput. Method., 11(6), 1350082. DOI
13	Chakraverty, S. and Pradhan, K.K. (2014), "Free vibration of exponential functionally graded rectangular plates in thermal environment with general boundary conditions", Aerosp. Sci. Technol., 36, 132-156. DOI
14	Curiel Sosa, J.L., Munoz, J.J., Pinho, S.T. and Anwar Beg, O. (2012), "(XFEM) Simulation of damage in laminates", Proceedings of Applied Sciences and Engineering (ECCOMAS 2012), (J. Eberhardsteiner et al. Eds.), Vienna, Austria, September.
15	Delale, F. and Erdogan, F. (1983), "The crack problem for a nonhomogeneous plane", J. Appl. Mech., 50(3), 609-707. DOI
16	Draiche, K., Tounsi, A. and Khalfi, Y. (2014), "A trigonometric four variable plate theory for free vibration of rectangular composite plates with patch mass", Steel Compos. Struct., Int. J., 17(1), 69-81. DOI
17	El Meiche, N., Tounsi, A., Ziane, N., Mechab, I. and Adda Bedia, E.A. (2011), "A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate", Int. J. Mech. Sci., 53(4), 237-247. DOI ScienceOn
18	Fekrar, A., Houari, M.S.A., Tounsi, A. and Mahmoud, S.R. (2014), "A new five-unknown refined theory based on neutral surface position for bending analysis of exponential graded plates", Meccanica, 49(4), 795-810. DOI
19	Hamidi, A., Houari, M.S.A., Mahmoud, S.R. and Tounsi, A. (2015), "A sinusoidal plate theory with 5-unknowns and stretching effect for thermomechanical bending of functionally graded sandwich plates", Steel Compos. Struct., Int. J., 18(1), 235-253. DOI
20	Finot, M. and Suresh, S. (1996), "Small and large deformation of thick and thin-film multi-layers: effect of layer geometry, plasticity and compositional gradients", J. Mech. Phys. Solid., 44(5), 683-721. DOI
21	Hebali, H., Tounsi, A., Houari, M.S.A., Bessaim, A. and Adda Bedia, E.A. (2014), "New quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates", J. Eng. Mech. (ASCE), 140(2), 374-383. DOI
22	Houari, M.S.A., Tounsi, A. and Anwar Beg, O. (2013), "Thermoelastic bending analysis of functionally graded sandwich plates using a new higher order shear and normal deformation theory", Int. J. Mech. Sci., 76, 102-111. DOI
23	Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. DOI
24	Karama, M., Afaq, K.S. and Mistou, S. (2003), "Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity", Int. J. Solids Struct., 40(6), 1525-1546. DOI
25	Khalfi, Y., Houari, M.S.A. and Tounsi, A. (2014), "A refined and simple shear deformation theory for thermal buckling of solar functionally graded plates on elastic foundation", Int. J. Comput. Method., 11(5), 135007.
26	Lu, C.F., Lim, C.W. and Chen, W.Q. (2009), "Semi-analytical analysis for multi-directional functionally graded 509 plates: 3-d elasticity solutions", Int. J. Numer. Meth. Eng., 79(1), 25-44. DOI
27	Nedri, K., El Meiche, N. and Tounsi, A. (2014), "Free vibration analysis of laminated composite plates resting on elastic foundations by using a refined hyperbolic shear deformation theory", Mech. Compos. Mater., 49(6), 641-650. DOI
28	Mahi, A., Adda Bedia, E.A. and Tounsi, A. (2015), "A new hyperbolic shear deformation theory for bending and free vibration analysis of isotropic, functionally graded, sandwich and laminated composite plates", Appl. Math. Model., 39(9), 2489-2508. DOI
29	Mantari, J.L. and Granados, E.V. (2015), "Thermoelastic analysis of advanced sandwich plates based on a new quasi-3D hybrid type HSDT with 5 unknowns", Compos.: Part B, 69, 317-334. DOI
30	Marur, P.R. (1999), "Fracture behaviour of functionally graded materials", Ph.D. Thesis; Auburn University, AL, USA.
31	Obata, Y. and Noda, N. (1994), "Steady thermal stresses in a hollow circular cylinder and a hollow sphere of a functionally gradient material", J. Ther. Stresses, 17(3), 471-488. DOI
32	Ould Larbi, L., Kaci, A., Houari, M.S.A. and Tounsi, A. (2013), "An efficient shear deformation beam theory based on neutral surface position for bending and free vibration of functionally graded beams", Mech. Based Des. Struct. Mach., 41(4), 421-433. DOI ScienceOn
33	Praveen, G.N., Chin, C.D. and Reddy, J.N. (1999), "Thermoelastic analysis of functionally graded ceramicmetal cylinder", J. Eng. Mech., 125(11), 1259-1267. DOI
34	Rashidi, M.M., Shooshtari, A. and Anwar Beg, O. (2012), "Homotopy perturbation study of nonlinear vibration of Von Karman rectangular plates", Comput. Struct., 106/107, 46-55. DOI ScienceOn
35	Reddy, J.N. (1984), "A simple higher-order theory for laminated composite plates", J. Appl. Mech., 51(4), 745-752. DOI
36	Tounsi, A., Houari, M.S.A., Benyoucef, S. and Adda Bedia, E.A. (2013), "A refined trigonometric shear deformation theory for thermoelastic bending of functionally graded sandwich plates", Aerosp. Sci. Techol., 24(1), 209-220. DOI
37	Reddy, J.N. and Chin, C.D. (1998), "Thermoelastic analysis of functionally graded cylinders and plates", J. Ther. Stresses, 21(6), 593-626. DOI ScienceOn
38	Swaminathan, K. and Naveenkumar, D.T. (2014), "Higher order refined computational models for the stability analysis of FGM plates - Analytical solutions", European J. Mech. A/Solids, 47, 349-361. DOI
39	Talha, M. and Singh, B.N. (2010), "Static response and free vibration analysis of FGM plates using higher order shear deformation theory", Appl. Math. Model, 34(12), 3991-4011. DOI ScienceOn
40	Touratier, M. (1991), "An efficient standard plate theory", Int. J. Eng. Sci., 29(0), 901-916. DOI
41	Vel, S.S. and Batra, R.C. (2002), "Exact thermoelasticity solution for functionally graded thick rectangular plates", AIAA J., 40(7), 1421-1433. DOI
42	Vel, S.S. and Batra, R.C. (2003), "Three-dimensional analysis of transient thermal stresses in functionally graded plates", Int. J. Solids Struct., 40(25), 7181-7196. DOI
43	Wen, P.H., Sladek, J. and Sladek, V. (2011), "Three-dimensional analysis of functionally graded plates", Int. J. Numer. Meth. Eng., 87(10), 923-942. DOI
44	Yaghoobi, H. and Fereidoon, A. (2014), "Mechanical and thermal buckling analysis of functionally graded plates resting on elastic foundations: An assessment of a simple refined nth-order shear deformation theory", Compos.: Part B, 62, 54-64. DOI
45	Ying, J., Lu, C.F. and Lim, C.W. (2009), "3D thermoelasticity solutions for functionally graded thick plates", J. Zhejiang Univ. Sci A, 10(3), 327-336. DOI
46	Yaghoobi, H. and Torabi, M. (2013a), "Post-buckling and nonlinear free vibration analysis of geometrically imperfect functionally graded beams resting on nonlinear elastic foundation", Appl. Math. Model., 37(18-19), 8324-8340. DOI
47	Yaghoobi, H. and Torabi, M. (2013b), "Exact solution for thermal buckling of functionally graded plates resting on elastic foundations with various boundary conditions", J. Therm. Stress., 36(9), 869-894. DOI
48	Yaghoobi, H. and Yaghoobi, P. (2013), "Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: An analytical approach", Meccanica, 48(8), 2019-2035. DOI ScienceOn
49	Zidi, M., Tounsi, A., Houari, M.S.A., Adda Bedia, E.A. and Anwar Beg, O. (2014), "Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory", Aerosp. Sci. Technol., 34, 24-34. DOI

	Shahrokh Hosseini Hashemi. (2017) Alexandria Engineering Journal Dynamic response of multiple nanobeam system under a moving nanoparticle /
1	Merbouha Barka. (2016) Steel and Composite Structures Thermal post-buckling behavior of imperfect temperature-dependent sandwich FGM plates resting on Pasternak elastic foundation / 22 (1) , 91
2	Fatima Bounouara. (2016) Steel and Composite Structures A nonlocal zeroth-order shear deformation theory for free vibration of functionally graded nanoscale plates resting on elastic foundation / 20 (2) , 227
4	Khadidja Aissani. (2015) Structural Engineering and Mechanics A new nonlocal hyperbolic shear deformation theory for nanobeams embedded in an elastic medium / 55 (4) , 743
3	Bachir Bouderba. (2016) Structural Engineering and Mechanics Thermal stability of functionally graded sandwich plates using a simple shear deformation theory / 58 (3) , 397
2	Zohra Abdelhak. (2016) Smart Structures and Systems Thermal buckling response of functionally graded sandwich plates with clamped boundary conditions / 18 (2) , 267
4	Youcef Beldjelili. (2016) Smart Structures and Systems Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory / 18 (4) , 755
1	F. Chattibi. (2015) Steel and Composite Structures Thermomechanical effects on the bending of antisymmetric cross-ply composite plates using a four variable sinusoidal theory / 19 (1) , 93
1	Ahmed Bakora. (2015) Structural Engineering and Mechanics Thermo-mechanical post-buckling behavior of thick functionally graded plates resting on elastic foundations / 56 (1) , 85
3	Sidi Mohamed El-Hassar. (2016) Geomechanics and Engineering Thermal stability analysis of solar functionally graded plates on elastic foundation using an efficient hyperbolic shear deformation theory / 10 (3) , 357
5	Mama Ahouel. (2016) Steel and Composite Structures Size-dependent mechanical behavior of functionally graded trigonometric shear deformable nanobeams including neutral surface position concept / 20 (5) , 963
4	Slimane Merdaci. (2016) Steel and Composite Structures A novel four variable refined plate theory for laminated composite plates / 22 (4) , 713
2	Abdelmoumen Anis Bousahla. (2016) Structural Engineering and Mechanics On thermal stability of plates with functionally graded coefficient of thermal expansion / 60 (2) , 313
6	Fouad Bourada. (2016) Steel and Composite Structures Buckling analysis of isotropic and orthotropic plates using a novel four variable refined plate theory / 21 (6) , 1287
5	Tahar Hassaine Daouadji. (2015) Geomechanics and Engineering Analytical solution of nonlinear cylindrical bending for functionally graded plates / 9 (5) , 631
4	Fethi Mouaici. (2016) Wind and Structures Effect of porosity on vibrational characteristics of non-homogeneous plates using hyperbolic shear deformation theory / 22 (4) , 429
5	Ahmed Boukhari. (2016) Structural Engineering and Mechanics An efficient shear deformation theory for wave propagation of functionally graded material plates / 57 (5) , 837
4	Abdelbaki Chikh. (2016) Structural Engineering and Mechanics Thermo-mechanical postbuckling of symmetric S-FGM plates resting on Pasternak elastic foundations using hyperbolic shear deformation theory / 57 (4) , 617
2	Mohammed Sid Ahmed Houari. (2016) Steel and Composite Structures A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates / 22 (2) , 257
03	Trupti Ranjan Mahapatra. (2016) International Journal of Computational Methods Nonlinear Flexural Analysis of Laminated Composite Panel Under Hygro-Thermo-Mechanical Loading — A Micromechanical Approach / 13 (03) , 1650015
2	Amlan Paul. (2016) Engineering Science and Technology, an International Journal Free vibration analysis of pre-stressed FGM Timoshenko beams under large transverse deflection by a variational method / 19 (2) , 1003
4	Abdelouahed Tounsi. (2016) Structural Engineering and Mechanics A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate / 60 (4) , 547
3	L. Hadji. (2015) Wind and Structures Influence of the porosities on the free vibration of FGM beams / 21 (3) , 273
2	Hayat Saidi. (2016) Geomechanics and Engineering A simple hyperbolic shear deformation theory for vibration analysis of thick functionally graded rectangular plates resting on elastic foundations / 11 (2) , 289
4	Ibrahim A. Abbas. (2016) Steel and Composite Structures Analytical solution of a two-dimensional thermoelastic problem subjected to laser pulse / 21 (4) , 791
4	Imene Laoufi. (2016) Steel and Composite Structures Mechanical and hygrothermal behaviour of functionally graded plates using a hyperbolic shear deformation theory / 20 (4) , 889
	Mohammed Sobhy. (2016) International Journal of Mechanical Sciences An accurate shear deformation theory for vibration and buckling of FGM sandwich plates in hygrothermal environment / 110 , 62
3	Habib Hebali. (2016) Steel and Composite Structures A novel four variable refined plate theory for bending, buckling, and vibration of functionally graded plates / 22 (3) , 473
	Y.S. Joshan. (2017) Composite Structures A new non-polynomial four variable shear deformation theory in axiomatic formulation for hygro-thermo-mechanical analysis of laminated composite plates / 182 , 685
3	Salima Abdelbari. (2016) Wind and Structures An efficient and simple shear deformation theory for free vibration of functionally graded rectangular plates on Winkler-Pasternak elastic foundations / 22 (3) , 329
	Ibrahim A. Abbas. (2017) Physica E: Low-dimensional Systems and Nanostructures Analytical solution of thermoelastic interaction in a half-space by pulsed laser heating / 87 , 254
1	(2017) Advances in materials research : AMR Bending and stability analysis of size-dependent compositionally graded Timoshenko nanobeams with porosities / 6 (1) , 45
5	(2015) Steel & Composite structures : an international journal A new five unknown quasi-3D type HSDT for thermomechanical bending analysis of FGM sandwich plates / 22 (5) , 975
6	(2015) Steel & Composite structures : an international journal Using modified Halpin-Tsai approach for vibrational analysis of thick functionally graded multi-walled carbon nanotube plates / 23 (6) , 657
1	(2015) Geomechanics & engineering A novel quasi-3D hyperbolic shear deformation theory for functionally graded thick rectangular plates on elastic foundation / 12 (1) , 9
6	(2015) Smart structures and systems Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory / 19 (6) , 601
6	(2015) Steel & Composite structures : an international journal The effect of carbon nanotubes agglomeration on vibrational response of thick functionally graded sandwich plates / 24 (6) , 711
3	(2015) Geomechanics & engineering A four variable refined nth-order shear deformation theory for mechanical and thermal buckling analysis of functionally graded plates / 13 (3) , 385
2	(2015) Steel & Composite structures : an international journal Analytical solutions for sandwich plates considering permeation effect by 3-D elasticity theory / 25 (2) , 127
3	(2017) Steel & Composite structures : an international journal Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core / 25 (3) , 347
6	(2015) Steel & Composite structures : an international journal Effects of CNTs waviness and aspect ratio on vibrational response of FG-sector plate / 25 (6) , 649
3	(2018) Steel & Composite structures : an international journal Size dependent bending analysis of micro/nano sandwich structures based on a nonlocal high order theory / 27 (3) , 371
6	(2015) Steel & Composite structures : an international journal Assessment of non-polynomial shear deformation theories for thermo-mechanical analysis of laminated composite plates / 27 (6) , 761
6	(2015) Steel & Composite structures : an international journal Quasi-3D static analysis of two-directional functionally graded circular plates / 27 (6) , 789
5	(2015) Steel & Composite structures : an international journal Vibration analysis of sandwich sectorial plates considering FG wavy CNT-reinforced face sheets / 28 (5) , 541
6	(2018) Steel & Composite structures : an international journal Numerical approaches for vibration response of annular and circular composite plates / 29 (6) , 759
5	(2015) Structural engineering and mechanics : An international journal Vibration response and wave propagation in FG plates resting on elastic foundations using HSDT / 69 (5) , 511
None	(2015) Advances in polymer technology Elasticity Solutions for Sandwich Arches considering Permeation Effect of Adhesive / 2020 (None) , 1
1	(2020) Steel & Composite structures : an international journal Vibration of angle-ply laminated composite circular and annular plates / 34 (1) , 141
2	(2020) Steel & Composite structures : an international journal Vibration analysis of FG porous rectangular plates reinforced by graphene platelets / 34 (2) , 215
1	(2020) Steel & Composite structures : an international journal Vibration behavior of functionally graded sandwich beam with porous core and nanocomposite layers / 36 (1) , 1
1	(2015) Steel & Composite structures : an international journal Influence of porosity distribution on vibration analysis of GPLs-reinforcement sectorial plate / 35 (1) , 111
2	(2015) Steel & Composite structures : an international journal Vibrational characteristic of FG porous conical shells using Donnell's shell theory / 35 (2) , 249
2	(2015) Steel & Composite structures : an international journal Influence of internal pores and graphene platelets on vibration of non-uniform functionally graded columns / 35 (2) , 295
1	(2015) Steel & Composite structures : an international journal Vibration behavior of trapezoidal sandwich plate with functionally graded-porous core and graphene platelet-reinforced layers / 36 (1) , 47
6	(2015) Steel & Composite structures : an international journal Vibration analysis of sandwich sector plate with porous core and functionally graded wavy carbon nanotube-reinforced layers / 37 (6) , 711
5	(2015) Steel & Composite structures : an international journal Vibration analysis of damaged core laminated curved panels with functionally graded sheets and finite length / 38 (5) , 477
7	(2015) Archive of applied mechanics : Ingenieur-Archiv Thermoelastic response of functionally graded sandwich plates using a simple integral HSDT / 91 (7) , 3403