• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.89-95
• /
• 2003

In this study, the technical characteristics of geosynchronous multi-mission satellites are investigated, compared to communication satellites. Geosynchronous meteorological satellites, whose imaging data is normally shared with the international society, have large coverage for monitoring and data service. Also the higher pointing accuracy is requested to keep the spatial resolution of 1-4km, compared to those of communication satellites. Cryogenic thermal control is needed for the better performance of IR sensors and the contamination protection of optical parts should be considered. On the other hands, for the successful development of the multi-mission satellite COMS, which will be launched in 2008, the special features of attitude control, electrical power, thermal control and mechanism are investigated.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.223-228
• /
• 2008

In order to acquire the images requested by users, it is very important to calculate mission schedule parameters such as imaging execution time and attitude tilt angle accurately. These parameters are based on orbit prediction. This paper describes the accuracy of orbit propagation for image planning. The orbit prediction data from PSS and MAPS has a certain discrepancy due to different orbit propagator. It is necessary for mission planner to confirm this value during mission planning phase. The pointing error which means the difference between target center and real image received is calculated and analyzed using KOMPSAT-2 image data.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.147-161
• /
• 2008

In this paper, fine attitude estimation using low-cost sensors for attitude pointing missions of spacecraft is addressed. Attitude kinematics and gyro models including bias models are in general utilized to estimate spacecraft attitude and angular rate. However, a linearized model and a transition matrix are derived in this paper from nonlinear spacecraft dynamics with external disturbances. A Kalman filtering technique is applied and offers relatively high estimation accuracy under dynamic uncertainties. The proposed approach is demonstrated using numerical simulations.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.74-79
• /
• 2012

Scalar quantification of the angular prediction error covariance matrix is considered for characterizing tracking performances in phased array radar tracking. Specifically, the maximum eigenvalue and the trace of the covariance matrix are examined in terms of consistency in parameterizing the probability of detection, taking antenna beam-pointing losses into account, and it is shown numerically that the latter is more consistent.

• Publications of The Korean Astronomical Society
• /
• v.11 no.1
• /
• pp.57-73
• /
• 1996

As a continuing effort to develop an automatic control system for small telescope, we developed the software for telescope control and CCD observations under DOS operating system. For accurate pointing of the telescope in short amount of time, we modelled the angular speed of the telescope by aquadratic function of time (constant acceleration) for the first 15 second and then linear function of time (zero acceleration) aftwewards. By changing the telescope speed from 'slew' to 'fine' before the telescope reaches the desired position, we could achieve the accuracy of a few arcsecond. The CCD control software was written for model CCD-10 of CCD Technology. This CCD can be used for guiding purposes. We also conducted the study for remote control of the telescope using telephone line. Although it cannot be used for real observations at the present form, we succeded in remotely pointing the telescope to desired direction. As faster communication technologies become widely available, simple observations can be made remotely in the near future. Finally we report some observational results made with the present control system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.5
• /
• pp.646-652
• /
• 2013

PRA(Position Reporting Accuracy) for EO/IR(Electro-Optic/Infrared) airborne camera is an important factor in geo-pointing accuracy. Generally, rate table is used to measure PRA of gimbal actuated camera like EO/IR. However, it is not always possible to fix an EUT(Equipment for Under Test) to rate table due to capacity limit of the table on the size and weight of the object(EUT). Our EO/IR is too big and heavy to emplace on it. Therefore, we propose a new verification method of PRA for airborne camera and assess the validity of our proposition. In this method we use collimator, angle measuring instrument, 6 dof motion simulator, optical surface plate, leveling laser, inclinometer and poster(for alignment).

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2004

As the first step of the real time monitoring system of the solar radio disturbance, we constructed the control system of the solar radio telescope. An 1.8m antenna built by Korean Astronomy Observatory has been used, and the observed radio flux is transformed to the digital signal by the powermeter. We have also developed a computer program CBNUART in order to control the telescope system and the powermeter. As the sun rises, the telescope begins to observe the sun, and ends the observation automatically at sunset. The CBNUART enables the telescope automatically to go to the position of the sunrise for the beginning the observation and come back to the setposition after the ending the observation at the sunset. An active tracking routine is adopted in order to improve the tracking accuracy of the control system, and we used an optical telescope equipped in front of the antenna for control test. The tracking test shows that our control system can track with the accuracy of arc seconds, and the 50 minute pointing test shows that the pointing accuracy of right ascension and declination are 1.12 and 0.08 arc minutes respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.154-159
• /
• 2013

Alignment tolerance for EO/IR airborne camera using common optic is an important factor in stabilization accuracy and geo-pointing accuracy. Before airborne camera is mounted on the aircraft, defining alignment tolerance and verification of it is essential in production as well as research and development. In this paper we establish basic concept on the definition and elements of alignment tolerance for airborne camera and propose how to measure each of those elements. Components and the measurement sequence of alignment tolerance are as follows: 1) tolerance of alignment between EO and IR LOS. 2) tolerance of sensor alignment. 3) tolerance of position reporting accuracy. 4) tolerance of mount alignment

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.341-343
• /
• 2009

The Ring Laser Gyroscope makes use of the Sagnac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. The Low Earth Orbit satellite for observatory use require the high accuracy Gyro to control and determine the altitude because of the need of payload pointing accuracy. In this paper, The theory of the Path Length Control is explained. The electrical design of Path Length Controller Is described. The Design for Path Length Controller is composed of the demodulator, integrator, phase shifter, high voltage amplifier. We apply the circuit to 28cm square ring laser gyro and get the test results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.838-841
• /
• 2000

To improve the accuracy of products and improve the product quality, we need to enhance the machining accuracy of the machine tools. To this point of view, measurement and inspection of finished part as well as error analysis of machine tools has been studied for last several decades. OMM(On the Machine Measurement) has been issued to alternate with CMM, pointing out disadvantages of high expenses and lots of setting time in CMM. In this paper, we study 1) the spherical surface manufacturing by volumetric error compensation of machine tool, 2) the system development of OMM without detaching work piece from a bed of machine tool after working. 3) the generation of the finished part profile by On the machine measurement. Furthermore, the output of OMM is compared with that of CMM, and verified the feasibility of the measurement system.