• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.438-445
• /
• 2000

Positioning garlic cloves in upright standing in garlic field has been regarded as a very important job because it affects clove rooting, growing and, eventually, quality and yield in garlic production, Because of the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual work that needs a tremendous human labors and increases garlic production cost. The overall objective of this research was to develop garlic planting machine through investigating physical properties of garlic and designing clove upright positioning device after figuring out the factors affecting metering device and upright clove positioning mechanism. With the outcomes of the metering and posture positioning experiment, a garlic clove planter having twelve planting rows was developed for 37kW type tractor and feasibility test was carried out in the field. And, According to the performance test and cost analysis, the planter could accomplish planting operation of one hectare plot in 6.3 hours giving 48 times better efficiency, 6.3hrs/ha, and 74.2% of production cost reduction effect, 1,092,546won/ha, than the manual works of 299hrs/ha and 282,258won/ha. And, break-even point ofthe planter was calculated as of 2.71 hectares.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.82-89
• /
• 2003

A robust motion control method is proposed fur the point-to-point position control of a XY positioning system which consists of a base cart, elastic ben and moving mass. The horizontal motion controller consists of the feedforward controller to suppress the single mode vibration of the elastic beam and the feedback controller to get the high-accuracy positioning performance of the base cart. Input preshaping vibration suppression method based on system modeling with analytic frequency equation is proposed and integrated into the robust internal-loop compensator(RIC) to increase the robustness of the whole closed-loop system The vertical motion controller is proposed based on the dual RIC structure. Through experiments, it is shown that the proposed method can stabilize the system and suppress the vibration in the presence of uncertainties and disturbances.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1330-1337
• /
• 2017

In off-line phase of the preliminary Cut-off indoor positioning scheme, which is one of the indoor positioning scheme using the fingerprint, relative ranks of peak RSSIs received from beacons at each reference point are stored in the fingerprint map. In some reference points, signals of multiple beacons may be received. In this case, the relative ranks may be different when constructing fingerprint and when receiving signals in real-time. To solve this problem, we propose a method to utilize only up to five beacons with high ranking when constructing a fingerprint and when receiving signals in real-time and comparing them with stored information of a fingerprint. Experiments were conducted on the estimation probabilities and the average error when using this method. Those are compared with the previous methods. Experimental results show that the estimation probabilities and the average error are improved by removing only the remaining five beacons at each reference point of the fingerprint.

• 한국측량학회지
• /
• 제17권2호
• /
• pp.145-152
• /
• 1999

제트추진연구소(JPL : Jet Propulsion Laboratory)에서는 매일 전세계에 분포된 정밀 측지용 GPS수신기의 광역망으로 부터 관측자료를 수집하고 분석하여 정밀한 GPS transmitter parameters (위성의 위치력 및 시계 보정값)를 산정하고 있으며 이를 이용한 자동화된 GPS 자료 해석 서비스를 제공하고 있다. 본 연구에서는 한측점의 2주파 GPS수신기로부터 획득한 위성관측자료를 E-mail 및 ftp(file transfer protocol)로 JPL의 주컴퓨터에 연결시켜 JPL의 정밀 GPS transmitter parameters 및 Gipsy/Oasis-II (GOA-II) s/w를 활용한 정밀절대측위(PPP : Precise Point Positioning)기법의 정밀도를 분석하고 PPP에 의한 GPS기준점 좌표의 산정 방안을 검토한 것이다. 검토결과, X, Y, Z 직교좌표계에서 수 cm급의 위치결정이 가능하였다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.155-161
• /
• 2013

PURPOSES: This study is to develop a road traffic sign recognition and automatic positioning for road facility management. METHODS: In this study, we installed the GPS, IMU, DMI, camera, laser sensor on the van and surveyed the car position, fore-sight image, point cloud of traffic signs. To insert automatic position of traffic sign, the automatic traffic sign recognition S/W developed and it can log the traffic sign type and approximate position, this study suggests a methodology to transform the laser point-cloud to the map coordinate system with the 3D axis rotation algorithm. RESULTS: Result show that on a clear day, traffic sign recognition ratio is 92.98%, and on cloudy day recognition ratio is 80.58%. To insert exact traffic sign position. This study examined the point difference with the road surveying results. The result RMSE is 0.227m and average is 1.51m which is the GPS positioning error. Including these error we can insert the traffic sign position within 1.51m CONCLUSIONS: As a result of this study, we can automatically survey the traffic sign type, position data of the traffic sign position error and analysis the road safety, speed limit consistency, which can be used in traffic sign DB.

• Journal of Astronomy and Space Sciences
• /
• 제28권1호
• /
• pp.55-62
• /
• 2011

The precise orbit determination (POD) of low earth orbiter (LEO) has complied with its required positioning accuracy by the double-differencing of observations between International GNSS Service (IGS) and LEO to eliminate the common clock error of the global positioning system (GPS) satellites and receiver. Using this method, we also have achieved the 1 m positioning accuracy of Korea Multi-Purpose Satellite (KOMPSAT)-2. However double-differencing POD has huge load of processing the global network of lots of ground stations because LEO turns around the Earth with rapid velocity. And both the centimeter accuracy and the near real time (NRT) processing have been needed in the LEO POD applications--atmospheric sounding or urgent image processing--as well as the surveying. An alternative to differential GPS for high accuracy NRT POD is precise point positioning (PPP) to use measurements from one satellite receiver only, to replace the broadcast navigation message with precise post processed values from IGS, and to have phase measurements of dual frequency GPS receiver. PPP can obtain positioning accuracy comparable to that of differential positioning. KOMPSAT-5 has a precise dual frequency GPS flight receiver (integrated GPS and occultation receiver, IGOR) to satisfy the accuracy requirements of 20 cm positioning accuracy for highly precise synthetic aperture radar image processing and to collect GPS radio occultation measurements for atmospheric sounding. In this paper we obtained about 3-5 cm positioning accuracies using the real GPS data of the Gravity Recover and Climate Experiment (GRACE) satellites loaded the Blackjack receiver, a predecessor of IGOR. And it is important to reduce the latency of orbit determination processing in the NRT POD. This latency is determined as the volume of GPS measurements. Thus changing the sampling intervals, we show their latency to able to reduce without the precision degradation as the assessment of their precision.

• 한국측량학회지
• /
• 제29권3호
• /
• pp.311-318
• /
• 2011

2011년 3월 11일 일본 동북부 해양에서 규모 9.0의 강진이 발생했다. 이 지진은 근대적인 지진관측이 시작된 이래 일본 최대 규모로 미야기 현 센다이 동쪽 179km 지점에서 발생했으며, 지진과 해일로 인해 2만 7천여 명에 이르는 사상자가 발생하였다. 본 연구에서는 일본 IGS 상시관측소의 GPS 관측자료를 기반으로 Mizusawa, Tsukuba 및 Usuda 상시관측소의 지진변위량을 산출하였다. 관측자료의 처리는 온라인 GPS 자료처리 서비스와 정밀과학기술용 소프트웨어를 이용하였으며 정밀절대측위 및 싱대측위 방법으로 처리하였다. 온라인 GPS 자료처리 서비스를 이용한 Kinematic 정밀절대측위를 통해 지진 전 후 IGS 상시관측소의 위치변화를 모니터링하고, 정밀과학 기술용 소프트웨어를 이용한 상대측위 방법으로 지진 전 후의 정밀한 지진변위량을 산출하였다. 연구결과 각 성분별로 최대 ${\pm}0.003m$의 RMSE를 가지는 정밀한 좌표성과를 산출할 수 있었으며, 지진으로 인해 Mizusawa 상시관측소가 남동쪽으로 약 2.6m 이동하였음을 알 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권1호
• /
• pp.31-36
• /
• 2014

Precise Point Positioning (PPP) is a stand-alone precise positioning approach. As the quality of satellite orbit and clock products from analysis centers has been improved, PPP can provide more precise positioning accuracy and reliability. A combined use of Global Positioning System (GPS) and Global Orbiting Navigation Satellite System (GLONASS) in PPP is now available. In this paper, we explained about an approach for combined GPS and GLONASS PPP measurement processing, and validated the performance through the comparison with GPS-only PPP results. We also used the measurement obtained from the GRAS reference station for the performance validation. As a result, we found that the combined GPS/GLONASS PPP can yield a more precise positioning than the GPS-only PPP.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.169-171
• /
• 2010

The goal of this study is to evaluate the performance of different solution types(a GPS-only, a GLONASS-only, and a GNSS solution) on GNSS positioning modes which are point positioning and relative positioning(DGNSS-, Static-, and Kinematic-solutions). I started with GNSS sites of seoul metropolitan government's RTK network which providing combined GPS/GLONASS observations : Gangseo(GANS), Dobong(DBON). The positioning accuracy of different solution types on positining modes are compared. Considering the compared results of all cases, can find not only the difference of the performance between the GNSS solution and the GPS-only solution is very small, but also the GLONASS-only solution is not far from the other solution types taking into consideration that GLONASS system is not (yet) a complete system.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1363-1370
• /
• 2018

In visible light (VL) positioning based on angle of arrival (AOA) estimation for smart indoor service, the AOA parameters obtained at the receiver has sometimes a random and distributed angle form instead of a point angle form due to the multipath transfer of the actual visible light and short positioning distance. The AOA estimation of a VL signal with a random and parametric distributed angle form may give incorrect AOA parameter estimates, which may result in poor VL positioning performance. In this paper, we classify the AOA parameters of the received VL signal into three forms according to the actual positioning channel environment and consider the short-range VL positioning method. We propose a subspace-based AOA parameter estimation technique and a data fusion method, and analyzed the proposed method by simulation and the measurement of the real VL channel characteristics.