• Journal of the Korean Society for Computer Game
• /
• v.31 no.4
• /
• pp.129-135
• /
• 2018

Electronic signatures, QR codes, and bar codes are used in payment systems used in real life. Research has begun on the payment system implemented in the VR environment. This paper proposes a VR electronic sign system that uses hand gesture recognition to implement an existing payment system in a VR environment. In a VR system, you can not hit the keyboard or touch the mouse. There can be several ways to configure a payment system with a VR controller. Electronic signage using hand gesture recognition is one of them, and hand gesture recognition can be classified by the Warping Methods, Statistical Methods, and Template Matching methods. In this paper, the payment system was configured in VR using the $p algorithm belonging to the Template Matching method. To create a VR environment, we implemented a paypal system where actual payment is made using Unity3D and Vive equipment.

• Cross-Cultural Studies
• /
• v.22
• /
• pp.223-277
• /
• 2011

Tan Yuanjie(譚元杰) of CHINA COSTUME ART OF PEKING OPERA("中國京劇服裝圖譜") is 'Foreword' attention from the bar 'Formalism'. A note is makeup system from ever performances here, 'what kind of adaptation must be a corresponding type of costume should be worn.' This stance to 'type of person's identity and faced the scene correlated' with the actual performance tradition plays out is going and, while here the rules to capture the opera's on the character of 'identity and the circumstances under clothing' is defined. This position discussed previously 'Formalism' in line with the will he perform, and looks to meet the elements of production. This basic stance is clean up, while 'Old Beijing Opera costumes costumes taxonomy largely' literary costume' and 'militant outfit' into two groups divided over throughout steamroll surgery, because surely need to have a more systematic classification. The classification system was established as 'Part 1. Mang, Part 2. Pi, Part 3. Xi, Part 4. Kao, Part 5. YI'. In addition to these classification systems, as well as the aforementioned 'object theory' Given the symbolic significance of the capacity to keep in mind is necessary. Costumes conduct, character, situation, atmosphere and so the transport of charged symbols here, a target symbol of the system is the projection of water. This costume is detrimental to the mall for the positionsay, but I kept in mind damwongeolyi internationalization of Chinese culture. when you see the view from the perspective of semiotic systems for the sign, that the theater is necessary to complement. In this paper, 'Yi(衣)' costume on the corresponding point of the target compared to the China Culture Department of Theatre and Folklore methodology ran off and sprinting was to lay the groundwork for research.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.4
• /
• pp.479-490
• /
• 2018

The granite melting concept, which was suggested by Gibb's group for the closing of a deep borehole, was experimentally checked for KURT granite. The granite melting experiments were performed in two pressure conditions of atmospheric melting with certain inorganic additives and high pressure melting formed by water vaporization. The results of atmospheric tests showed that KURT granite started to melt at a lower temperature of $1,000^{\circ}C$ with NaOH addition and that needle shaped crystals were formed around partially melted crystals. In high pressure tests, vapor pressure was increased by adding water with maximum pressure of about 400 bars. KURT granite was partially melted at $1,000^{\circ}C$ when vapor pressure was low. However, it was not melted at vapor pressures higher than 200 bars. Therefore, it was determined that high pressure with a small amount of water vapor more effectively decreased the melting point of granite. Meanwhile, high temperature and high pressure vapor caused severe corrosion of the reactor wall.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.103-115
• /
• 2019

In this study, the strength and stiffness (EI) of wood-concrete composite beams for bridges with T-shaped cross section were evaluated. Two types of connectors were used: connectors bonded with epoxy adhesive and connectors attached to the wood just by pre-drilling (without adhesive). The connectors consisted of common steel bars with a diameter of 12.5 mm. Initially, the strength and stiffness (EI) of the beams were analyzed by bending tests with the load applied at the third point of the beam. Subsequently, the composite beams were evaluated by numerical simulation using ANSYS software with focus on the connection system. To make the composite beams, Eucalyptus citriodora wood and medium strength concrete were used. The slip modulus K and the ultimate strength values of each type of connector were obtained by direct shear tests performed on composite specimens. The results showed that the connector glued with epoxy adhesive resulted in better strength and stiffness (EI) for the composite beams when compared to the connector fixed by pre-drilling. The differences observed were up to 10%. The strength and stiffness (EI) values obtained analytically by $M{\ddot{o}}hler^{\prime}$ model were lower than the values obtained experimentally from the bending tests, and the differences were up to 25%. The numerical simulations allowed, with reasonable approximation, the evaluation of stress distributions in the composite beams tested experimentally.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.99-104
• /
• 2019

In a gas system fire extinguishing system, extinguishing agents are usually stored with approximately 280 bar at $21^{\circ}C$ and are released at approximately 8 MPa through the decompression valve and orifice to quickly suppress the fire. When extinguishing agents are discharged, they cause a loud noise (approximately 140 dB), which can damage electronics, such as hard disk drives (HDDs). Therefore, the noise is becoming a serious issue in the gas extinguishing system. The method of the noise reduction by adding an absorbent is most general and in this study, the thickness of the absorbent was as a selected design variable. The noise level at the observation point and the flow characteristics inside the nozzle were numerically calculated and analyzed using the commercial code ANSYS CFX ver. 18.1.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.285-293
• /
• 2022

PURPOSE. This study evaluated the relationship among translucency, crystalline phase, grain size, and fracture toughness of zirconia. MATERIALS AND METHODS. Four commercial zirconia - Prettau^®Anterior^® (PA), Prettau^® (P), InCorisZI (ZI), and InCorisTZI (TZI)- were selected for this study. The bar specimens were prepared to determine fracture toughness by using chevron notched beam method with four-point bending test. The grain size was evaluated by a mean linear intercept method using a scanning electron microscope. X-ray diffraction and Rietveld refinement were performed to evaluate the amount of tetragonal and cubic phases of zirconia. Contrast ratio (CR) was measured to investigate the level of translucency. RESULTS. PA had the lowest fracture toughness among other groups (P < .05). In addition, the mean fracture toughness of P was significantly less than that of ZI, but there was no difference compared with TZI. Regarding grain size measurement, PA had the largest average grain size among the groups. P obtained larger grain size than ZI and TZI (P < .05). However, there was no significant difference between ZI and TZI. Moreover, PA had the lowest CR value compared with the other groups (P < .05). This means PA was the most translucent material in this study. Rietveld refinement found that PA presented the greatest percentage of cubic phase, followed by TZI, ZI, and P, respectively. CONCLUSION. The different approaches are used by manufacturers to fabricate various types of translucent zirconia with different levels of translucency and mechanical properties, which should be concerned for material selection for successful clinical outcome.

• Advances in concrete construction
• /
• v.14 no.1
• /
• pp.45-55
• /
• 2022

In this article, the flexural and shear capacity of ultra-high-performance fiber-reinforced concrete beams (UHPFRC) using two kinds of rebars, including GFRP and steel rebars, are experimentally investigated. For this purpose, six UHPFRC beams (250 × 300 × 1650 mm) with three reinforcement ratios (ρ) of 0.64, 1.05, and 1.45 were constructed using 2% steel fibers by volume. Half of the specimens were made of UHPFRC reinforced with GFRP rebars, while the other half were reinforced with conventional steel rebars. All specimens were tested to failure in four-point bending. Both the load-deformation at mid-span and the failure pattern were studied. The results showed that utilizing GFRP bars increases the flexural strength of UHPFRC beams in comparison to those made of steel bars, but at the same time, it reduces the post-cracking strain hardening. Furthermore, by increasing the percentage of longitudinal bars, both the post-cracking strain hardening and load-bearing capacity increase. Comparing the experiment results with some of the available equations and provisions cited in the valid design codes reveals that some of the equations to predict the flexural strength of UHPFRC beams reinforced with conventional steel and GFRP bars are reasonably conservative, while Khalil and Tayfur model is un-conservative. This issue makes it essential to modify the presented equations in this research for predicting the flexural strength of UHPFRC beams using GFRP bars.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.3
• /
• pp.17-30
• /
• 2010

This paper aims to excavate and make storytelling of cultural landforms around Shincheon, Geumho river in Daegu and then to build the strategy for making its application. The main results are as follows. 1) There are main cultural landforms such as Yongdubawi(龍頭岩, river cliff), river cliff, rock shelter(岩蔭), sheeting joint landform, river cave, tor, etc. around Shincheon. 2) there are main cultural landforms such as riverine wetland, ferry, point bar, river cliff, Hwadam(畵潭, pool), Donghwacheon(stream), Mutae(無怠), Chimsan(hill), Yeonamsan(hill), Sanghwadae(river cliff), etc. around Geumho river. 3) It is necessary to excavate and restore cultural landforms around Shincheon and Geumho river for protection, Also the valuable cultural landforms should be designated as cultural assets in order to prevent damage. 4) Considering from application of cultural landforms around Shincheon, natural observation site need to be designed for experiencing culture, history and ecological environment. However, in viewpoint of application of cultural landforms around Geumho river, it is much better to plan a few of Geumho river cultural landform trails for self-guided tour.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.29-46
• /
• 2020

In this study, changes in the fluvial landforms of the Yeoju section of the Han River, which was made up of the Han River Restoration Project, were examined through existing previous research data, government's environmental impact assessment data, satellite images, and field observations. For example, In the vicinity of Dori Island, the most upstream part of the study section, the location of the confluence of the Han River and Cheongmi Stream was changed, and it was found that a significant portion of the sand sedimentary layer disappeared. In the Bawuinupgubi area, the wetland, which is the first class in the ecological nature, was greatly modified, and the elevation of the ground rose as Gangcheon island and it was completely separated from the river by dredging The confluence of Geumdangcheon and the point bar of Yeonyang-ri in the south were also dredged, turned into an artificial waterfront park, and a chute channel remained in the form of a wetland was also developed as a recreational park. The deposional forms around Baekseok-ri islands also disappeared as dredging was carried out. Among the areas adjacent to the confluence of Bokcheon and Yangchon-ri Island, some sedimentay forms remains, but the abandonned channel between Yangchon-ri and the northern river bank has been changed into a riverside reservoir through dredging and embankment construction, and the waterway of the tributary river(Yazoo) has been greatly changed.

• Restorative Dentistry and Endodontics
• /
• v.47 no.3
• /
• pp.32.1-32.11
• /
• 2022

Objectives: This study aimed to evaluate the influence of inorganic composition and filler particle morphology on the mechanical properties of different self-adhesive resin cements (SARCs). Materials and Methods: Three SARCs including RelyX Unicem-2 (RUN), Maxcem Elite (MAX), and Calibra Universal (CAL) were tested. Rectangular bar-shaped specimens were prepared for flexural strength (FS) and flexural modulus (FM) and determined by a 3-point bending test. The Knoop microhardness (KHN) and top/bottom microhardness ratio (%KHN) were conducted on the top and bottom faces of disc-shaped samples. Sorption (Wsp) and solubility (Wsl) were evaluated after 24 hours of water immersion. Filler morphology was analyzed by scanning electron microscopy and X-ray energy dispersive spectroscopy (EDS). FS, FM, %KHN, Wsp, Wsl, and EDS results were submitted to 1-way analysis of variance and Tukey's post-hoc test, and KHN also to paired t-test (α = 0.05). Results: SARC-CAL presented the highest FS value, and SARC-RUN presented the highest FM. SARC-MAX and RUN showed the lowest Wsp and Wsl values. KHN values decreased from top to bottom and the SARCs did not differ statistically. Also, all resin cements presented carbon, aluminum, and silica in their composition. SARC-MAX and RUN showed irregular and splintered particles while CAL presented small and regular size particles. Conclusions: A higher mechanical strength can be achieved by a reduced spread in grit size and the filler morphology can influence the KHN, as well as photoinitiators in the composition. Wsp and Wsl can be correlated with ions diffusion of inorganic particles.