• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.141-148
• /
• 2012

The power system of leisure ship has a character of stand-alone type, so it continuously checks the usable power. Especially, the leisure ship using renewable energy needs to adjust the power consumption of loads according to the usable power. Also, the important loads of leisure ship are different by operation mode. However, current power management system doesnot consider such character. This paper studied load management system of the SPMS(Smart Power Management System) and composed using the smart plug. The SPMS controls the loads depending on a user's pattern and character through variable priority number control. This control algorithm was verified through simulation of assumed user and situation using LabVIEW.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.10a
• /
• pp.71-75
• /
• 1996

공정육묘의 생장과 품질은 공정묘개체군(이하 '묘개체군'이라 칭함)내 미기상의 영향을 크게 받는다. 현재까지, 식물생태계의 미기상 변화에 따른 작물생육의 반응 또는 식물생태군의 공기역학적 특성과 관련된 연구$^{(4). (5). (6)}$ 는 노지식물을 대상으로 광범위하게 이루어져 왔으나, 식물종묘공장과 같은 폐쇄계 식물생산 시설에서 묘개체군내의 미기상 특성에 관한 연구는 Kim등$^{(3)}$ 에 의해서 최근들어 시도되었다. (중략)

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1996.10a
• /
• pp.76-80
• /
• 1996

공정육묘는 기후의 영향을 쉽게 받는 자연광하에서 대부분의 생산이 이루어지기 때문에 계획적인 묘생산이 어렵게 된다. 향후 식물공장(Plant factory) 또는 폐쇄생태계생명유지시스템(Controlled ecological life support system, CELSS)과 같이 폐쇄도가 높은 식물생산 시스템에서는 식물종묘 생산의 대부분이 인공광을 이용한 조건에서 이루어질 것으로 예상된다. (중략)

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.275-280
• /
• 1999

This study was conducted to investigate the effects of $CO_2$ concentration(310 or 950$\mu$ mol.mol$^{-1}$ ) and air current speed(0.3, 0.5, 0.7 or 0.9m.s$^{-1}$ ) on the growth and development of eggp1ant Plug seedlings (Solanum melongena L.) under artificial 1ighting. For the treatment of $CO_2$ enrichment, stem length and diameter, the ratio of stem length to stem diameter, plant height, leaf area, net photosynthetic rate, top dried weight were significantly different at 1% level. Stem length of plug seedlings decreased at the condition under enriched $CO_2$ and high air current speed above plug stand. Stem diameter of plug seedlings increased and plant height decreased with the increasing $CO_2$ concentration. Plug seedlings had maximum net photosynthetic rate at the air current speed of 0.7m.s$^{-1}$ . Net photosynthetic rate at $CO_2$ concentration of 950$\mu$mol.mol$^{-1}$ increased by 46% than those at 310$\mu$mol.mol$^{-1}$ . Thus $CO_2$ enrichment would be effective for the production of plug seedlings with high quality.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.498-509
• /
• 2001

Collaborative systems allow users, who may be far removed from each other geographically, to do collaborative work such as 3D animation, computer game, and industrial design in a single virtual space. This paper describes our experience to develop a collaborative system framework that aims at expanding the some functions of a stand-alone visual modeling tool, called 3D Studio Max, into those of the distributed collaborative working environments. The paper mainly deals with design and implementation of a 3D shared-object Plug-In with respect to the 3D Studio Max Plug-In Software Development Kit in the distributed collaborative system developed by the authors. There are two major functions of the proposed scheme; one is to write 3D object-information to the shared memory after extracting it from the 3D Studio Max, the other is to create 3D objects after retrieving them from the shared memory. Also, the proposed scheme provides a simple way of storing 3D objects that have variable size, by means of shared memory which located in between the collaborative system clients and 3D studio Max. One of the remarkable virtures of the Plug-In is to reduce a considerable amount of shared object data which in consequence can mitigate the network overhead. This can be achieved by the fact that the system is able to extract a minimum amount of 3D objects that are required to transmit. Also, using the proposed scheme, user can facilitate 3D Studio Max into distributed collaborative working environments. This, in consequence give many benefits such as saving time as well as eliminating space constraints in the course of 3D modeling when we are under industrial design process.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2603-2605
• /
• 2001

In this paper, we introduce the concept and construction of a web-based bidirectional remote laboratory system. In this configuration, students build and test circuits using internet at home, and the circuit components and experimental equipments at the school are interconnected following student's design. This means that it is possible to choose components, build circuits, connect experiment equipments, control the equipment. and receive measurement results at home in real-time. Labview and Java are used to control this system efficiently and to provide user-friendly environments. Computer-based function generator, DMM, and oscilloscope are used and switch module is used to change interconnections. It was found that a system adopting computer-based instruments, which include PXI/CompactPCI modules and PC plug-in board, provide better performance than that adopting stand-alone instruments connected with GPIB. It is believed that, if this system is installed, the real experiments, not the virtual experiments based on simulation, can be done at home effectively, resulting in revolutional change in engineering education.

• BMB Reports
• /
• v.44 no.2
• /
• pp.107-112
• /
• 2011

We have developed a biologist-friendly, stand-alone Java GUI application, IdBean, for ID conversion. Our tool integrated most of the widely used ID conversion services that provide programmatic access. It is the first GUI ID conversion application that supports the direct merging as well as comparison of conversion results from multiple ID conversion services without manual effort. This tool will greatly help biologists who handle multiple ID types for the analyses of gene or gene product lists. By referring to multiple conversion services, the number of failed IDs can be reduced. By accessing ID conversion service online, it will potentially provide the most up-to-date conversion results. The application was developed in modular form; however, it can be re-packaged into plug-in form. For the development of a bioinformatics analysis tool, the module can be used as a built-in ID conversion component. It is available at http://neon.gachon.ac.kr/IdBean/.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.5
• /
• pp.513-527
• /
• 2000

This paper describes our experience to design and implementation of a collaborative system framework that allows to develop certain collaborative applications such as 3D animation, computer game, and industrial design. The collaborative system enables users, who located in geographically long distance, to do collaborative work in a single virtual space. The proposed system basically consists of client and server system. The goal of proposed system is to support scalability, portability, and platform independent. In order to achieve these, the server is implemented in Java platform and is adopted to the hybrid architecture which takes the advantages both in centralized and decentralized collaborative system. We construct the server base on its functional characteristics so called User Manager Server (UMS), Session Manager Server (SMS), and Information Server (IS), The UMS manages the users who are taking part in the collaborative operations. The SMS supports the conferencing in the proposed system. The IS provides the connection methods among the UMSs. For user's convenience, we implement the client using Visual C++ in Windows. We also expend the functions of 3D Studio Max to distributed environment by means of the plug-in module, and facilitate the chatting and white board functions as well.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.21-26
• /
• 2011

Differences among cultivars, conditions of nutrient solution, nursing materials, and soilless culture systems were investigated to select suitable cultivar and cultivation methods for stable production of summer spinach in the highlands. The 'Quinto' spinach showed the earliest growth and highest yield. For yield increase of summer spinach, optimal solution pH was 6.0, EC was $2.0dS{\cdot}m^{-1}$, and $NH_4-N$ ratio of nutrient solution was 30 percent Stand rate of spinach in nursing seedlings, at 200-cell-tray filled with mixed nursing soil (peat : perlite = 7 : 3), was higher than those grown in urethane sponge and rock-wool plug. Yield was also 18 to 24 percent higher than those in rock-wool plug and urethane sponge. Plant length and yield of spinach in mixed substrate (peat : perlite = 7 : 3) filled nutrient film technique (MSNFT) system were longer of 18 percent, and higher of 9 percent than those in deep flow technique (DFT) system, respectively. However, changes of root zone temperature, pH and EC showed similar pattern with DFT. Therefore, growing 'Quinto' cultivar at 6.0 of pH, $2.0dS{\cdot}m^{-1}$ of EC, 30 percent of $NH_4-N$ ratio, at 200-cell-tray filled with mixed nursing soil, and MSNFT cultivation system, was the best for production of summer spinach in the highlands.