• Geomechanics and Engineering
• /
• v.15 no.1
• /
• pp.695-710
• /
• 2018

Formation of a soil plug in an open-ended pile is a very important factor in determining the pile behavior both during driving and during static loading. The degree of soil plugging can be represented by the incremental filling ratio (IFR) which is defined as the change in the plug length to the change of the pile embedment length. The experimental tests carried out in this research contain 138 tests that are divided as follows: 36 tests for single pile, 36 tests for pile group ($2{\times}1$), 36 tests for pile group ($2{\times}2$) and 30 pile group ($2{\times}3$). All tubular piles were tested using the poorly graded sand from the city of Karbala in Iraq. The sand was prepared at three different densities using a raining technique. Different parameters are considered such as method of installation, relative density, removal of soil plug with respect to length of plug and pile length to diameter ratio. The soil plug is removed using a new device which is manufactured to remove the soil column inside open pipe piles group installed using driving and pressing device. The principle of soil plug removal depends on suction of sand inside the pile. It was concluded that the incremental filling ratio (IFR) is changed with the changing of soil state and method of installation. For driven pipe pile group, the average IFR for piles in loose is 18% and 19.5% for L/D=12 and 15, respectively, while the average of IFR for driven piles in dense sand is 30% and 20% for L/D=12 and L/D=15 respectively. For pressed method of pile installation, the average IFR for group is zero for loose and medium sand and about 5% for dense sand. The group capacity increases with the increase of IFR. For driven pile with length of 450 mm, the average IFR % is about 30.3% in dense sand, 14% in medium and 18.3% for loose sand while when the length of pile is 300 mm, the percentage equals to 20%, 17% and 19.5%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.121-124
• /
• 2001

Potato (Solanum tuberosum L.) tubers of 10, 20, 30, 40, and 50 g were planted in plug trays with vermiculite-based root medium on 10 August 2000 and grown for 15 days in a glasshouse to determine the effects of mini-tuber size on plug seedling growth and field performance of plug seedlings. For a control, common potato tubers weighing 50 g were also planted. As size of seed tubers planted increased from 10 to 50 g, seedling height decreased from 24.6 to 20.0cm while shoot number per seedling increased from 2.0 to 3.5, main stem diameter from 4.3 to 6.1mm, and fresh weight of root + top from 9.3 to 19.4 g/seedling. At 90 days after transplanting plug seedlings, the total number of tubers per plant increased from 3.62 to 4.72, average tuber weight from 62.9 to 72.8g, and total tuber yield 20.5 to 23.6 t/ha with increase in seed tuber size. Plug seedlings raised from 50g tubers produced 22% more tubers per plant and had 21 % higher＞80g tuber yield than the directly planted potatoes.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.34-41
• /
• 2012

The study was conducted in a glasshouse to examine the possibility of producing paprika plug seedlings in a newly developed inert phenolic foam growing medium. Plug seedlings of 'Fascinato' paprika were grown in five media, Grodan rockwool (Grodan Co. Ltd., Denmark), UR rockwool (UR Co. Ltd., Korea), phenolic foam LC (Smithers Oasis Korea Co. Ltd., Korea), phenolic foam RC, and phenolic foam 3813-4 all in a pellet type. Seeds were germinated in a growth chamber ($25^{\circ}C$, 90% RH, dark) for 4-5 days and then seedlings were grown in a glasshouse with nutrient solution supplied by an overhead irrigation system. Seedling growths were measured 20 days after sowing. The medium pH was the highest in the Grodan rockwool, and medium EC was the highest in phenolic foam 3813-4, although no nutritional excess disorders were observed. Germination rates of paprika were higher than 90% in all the media. Plant height, stem diameter, T/R ratio, leaf area, and chlorophyll showed a similar to those in the rockwool medium. Number of leaves, length of the longest root and dry weights of shoot were not significantly different among treatments. Overall, phenolic foam LC and RC produced seedlings with a similar growth as the rockwool medium. The results obtained suggest that rockwool can be replaced with a new material such as phenolic foam in the commercial scale production of plug seedlings of 'Fascinato' paprika.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.311-316
• /
• 1997

Two methods were used to detrermine the net photosynthetic rate(NPR) in the plug stand using a wind tunnel for plug seedlings Production. One is called as the integration method in which NPR calculated by the use of air current speed and $CO^2$ concentration measured at any heights above the medium surface in a wind tunnel were summed. It was assumed that the air flow at any layer did not mix with the lower or upper air layer. The other is called as the diffusion method in which eddy diffusivities above the plug stand were used to determine the NPR in the plug stand. In this method, $CO^2$ above or inside the plug stand was assumed to be absorbed vertically. NPR determined by the diffusion method was 28~45% of the NPR calculated by the integration method. Considering the magnitude of NPR and the effects of the air current speed on NPR, the integration method would be adequate for the calculation of NPR in the plug stand. Maximum NPR determined using the integration method appeared at the air current speed of 0.7m $s^{-1}$. It was ascribed to the decreased diffusion resistances of $CO^2$ with the increasing air current speed. NPR at the rear region in plug stand was 20~34% lower than that at the front region. NPR sharply decreased with the increase of an elapsed time after the beginning of photoperiod. Therefore $CO^2$ enrichment would be effective to force the growth of plug seedlings in a semi-closed ecological system under artificial lighting.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.201-207
• /
• 2012

This study was conducted to investigate the effect of supporting material and ionic strength of the MS medium on growth of strawberry plantlets cultured in vitro for the rapid mass production. Explants of $Fragaria$ $ananassa$ 'Houkouwase' in vitro were planted in the agar or Tosilee (commercial plug medium) medium as the supporting material and supplied with 1/4 MS, 1/2 MS or basal (as the control) MS medium in an autotrophic micropropagation. Plant height and root length were significantly greater when they were cultured in 1/2 MS medium as compared to those grown in the agar medium. Also, shoot fresh and dry weights, and leaf area in the 1/2 MS medium were greater than in 1/4 MS or basal MS medium. When plantlets were cultured in Tosilee medium and fed with the basal MS medium, plant height, root length, shoot fresh and dry weights, root fresh and dry weights, and leaf area were promoted and greater than those in plantlets cultured in the agar medium.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.32-42
• /
• 1991

In SI engine research the pressure data in cylinder is the most important fundamental ones leading to engine efficiencies and performances. It is, therefore, necessary to obtain accurate pressure data and yet it is often impossible to install a reliable data producing, flush-mounted type pressure transducer in a cylinder of small and medium size multicylinder SI engines. When flush mounting the transducer is not possible, the spark-plug type pressure transducer is commonly used as an alternative. In this case, the transmission tube of spark-plug type pressure transducer introduces distortions in the pressure signal. Efforts were made to understand the dynamic characteristics of spark-plug pressure transducer by shock tube tests and real engine experiments. In engine experiment the cylinder pressure data were simultaneously obtained by both flush mounted and spark-plug type pressure transducers of certain transmission tube geometry. Those pressure data collected by spark-plug type pressure transducer were tested for correction to flush mounted ones by the application of transfer function. As a result of the calibration the IMEP difference between F/M data and improved S/P data was shown to be corrected about 75-98% from the original ones.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.325-328
• /
• 2001

This experiment was conducted to investigate the effect of plug cell volume and medium on rooting and growth of lateral shoot cuttings of a few tomato cultivars. Plug cell volume was varied from 23 to 300 mL or control (cutting bed) and media used were carbonized rice hull (CRH), CRH+perlite, CRH+peatmoss and perlite+peatmoss. Nursery plants were able to be transplanted in 15 to 20 days after lateral shoots cutting in tomato. In volume of cutting media, the pots of 23 to 300 mL were proper, although root growth was gradually limited in decreased media volume. Rooting and growth was not influenced by plug tray cell medium of 120 mL or more. Cherry tomato Pepe (c.v.) showed 100% rooting and better growth, while in Momotaro (c.v.) rooting was 90%. There were 100% rooting and no considerable changes grown in all media tested of cutting plug tray volume of 30 mL.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.221-227
• /
• 1999

The immobilized culture system of Saccharomyces cerevisiae was examined to improve the efficiency of vinegar production from persimmon juice. Optimum concentration of Na-alginate for the immobilization was 2%. When the 1eakage of yeast from get beads was checked by turbidity of culture medium with varying concentration of Na-alginate from 1 to 4%, turbidity of culture medium increased from 8 hrs of cultivation with 1% Na-alginate concentration showing optical density of 0.82 at 20 hrs. However, the increase in turbidity of culture medium was slow with 2-4% Na-alginate showing optical density of 0.55-0.58 at 20 hrs. Microscopical analysis of gel matrix showed that the immobilized yeast was grown well regardless of Na-alginate concentration. Optimum size of gel bead and amount of inoculation were 2-3 m and 33mg, respectively. For ethanol production aerobic cultivation for 121hrs using cohen plug followed by anaerobic cultivation using silicon plug equipped with a check valve was the most effective.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.199-206
• /
• 2012

This study was conducted in a glasshouse to examine the possibility of producing tomato plug seedlings in a newly-developed inert phenolic foam medium. Plug seedlings of 'Madison' tomato were grown in four pellet type media, Grodan rockwool, UR rockwool, phenolic foam LC, and phenolic foam LC-lite. Seed germination was checked for 7 days. Seedling growth was measured at 19 days after sowing. The greatest germination was obtained in the phenolic foam LC and phenolic foam LC-lite. Plant height, hypocotyl length, leaf area, dry weight, and fresh weight were significantly greater in the rockwool medium than those in the other media. However, the T/R ratio and stem diameter were the greatest in the phenolic foam LC than those in the other media. The total porosity and container capacity of the phenolic foam LC was higher than in the other media. The air space (%) was lowest in the phenolic foam LC. Overall, the phenolic foam LC and phenolic foam LC-lite produced seedlings with similar growth as the rockwool. These results suggested that both phenolic foam LC and phenolic foam LC-lite have potential to be used in production of plug seedlings of 'Madison' tomato.

• 한국가스학회:학술대회논문집
• /
• 2001.10a
• /
• pp.277-282
• /
• 2001