• Journal of Biosystems Engineering
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2007

In the study, the cone index, the cohesion and the internal friction angle of soil were measured before and after tillage in order to suggest relative improvement in soil properties by comparing the two measured values before and after tillage. The tillage methods tested in the study were five combinations of plowing and rotovating; one plow tillage operation, one plow followed by one rotary, one plow followed by two rotary, one rotary without plow and two rotary without plow. The experiments were performed in a soil bin in Sunggyunkwan Univ. and in four selected test fields in Yeoju, Seodun-Dong, Suwon (especially, two different fields) and Chungju. In general, the internal friction angle and cohesion of soil increased with the increase of soil compaction. After applying the tillage operations, the internal friction angle reduced by 14 degree and the cohesion decreased up to about $2.2N/cm^2$ on the soil bin in comparison with those before tillage. The two values, however, reduced by 9 degree and up to about $1.0N/cm^2$ on the tested fields. The CIs for all the tillage operations on the soil bin and on 4 different test fields were decreased by 800 kPa in comparison with those before tillage. The best combination of tillage operations for decreasing the CIs of soil was one plow operation followed by one rotary. The CIs for one plow operation followed by two rotary were slightly higher than that for one plow operation followed by one rotary because one plow operation followed by two rotary crushed down the soil excessively, so that the porosity of soil decreased.

• Journal of Biosystems Engineering
• /
• v.22 no.2
• /
• pp.117-126
• /
• 1997

A series of soil bin experiment was carried out on sandy loam to investigate if it is possible to predict implement draft by some analog tool. Chisel configuration resembling a cone penetrometer section was used as an analog tool. The angle of cone was 30 degree. Three types of tillage implement, or oriental janggi, moldboard plow and chisel plow were chosen for this study. Experimental tillage speed was 0.22, 0.33, 0.49 m/s ad tillage depth was 8, 12, 16cm. For the experimental tillage speed range, the increase of tillage speed did not affect the tillage draft for the three types of implement and analog tool, but as the tillage depth increased, tillage draft of the three types of implement and analog tool increased linearly. The linear relationship was found between the tillage draft of analog tool and that of three types of tillage implement for the experimental tillage depth and speed range with high value of $R^2$ Thus it was concluded from the above results that an analog tool can be used to predict the tillage draft of oriental janggi, moldboard plow and chisel plow. But more experiment for various soil types and theoretical verification are needed for more generallization.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.83-93
• /
• 2018

Purpose: This study derived the consumed power and load characteristics of a tillage operation performed in an upland field located in Seomyeon, Chuncheon, Rep. Korea, where potatoes and cabbages were cultivated in two crops. Methods: A plow and rotavator were mounted on a tractor with 23.7 kW of rated power to perform the tillage operation. The work conditions were determined, considering the actual working speed of the tillage operation performed by the local farmers. The power consumption of the rear axle, engine, and power take-off (PTO), PTO torque, and tractive force were measured under each work condition. The consumed power and load characteristics were analyzed using their average values. Results: The rotary-tillage operation consumed more engine power than the plow operation for the same tractor-transmission gear condition. The PTO in the rotary-tillage operation and the rear axle in the plow operation consumed the most power. The power consumption of the engine and the PTO for the rotary-tillage operation tended to increase as the transmission gears of the tractor and the PTO became higher. In contrast, the rear-axle power consumption was insignificant. In addition, the PTO torque tended to rise as the tilling pitch increased. For the plow operation, the drawbar power and the rear axle power accounted for 68-90% of the engine power. The engine and rear axle power, drawbar power, and tractive force tended to rise as the working speed increased. Conclusions: The power consumption and load characteristics differed for the plow and rotary-tillage operations. They may also differ depending on the soil conditions. Therefore, the power consumption and load characteristics in various work environments and regions should be analyzed, and reflected in the design of tractors and working implements. The results derived from this study can be used as a reference for such designs.

• Journal of Biosystems Engineering
• /
• v.38 no.2
• /
• pp.73-80
• /
• 2013

Purpose: This study was conducted to compare tillage and loads characteristics of three types of rotavators in farmland working condition of Korea. Methods: Tillage operations using three types of rotavators, i.e. rotary-type, crank-type and plow-type, were carried out in a dry field of Korea. The same prime mover tractor was used for driving three types of rotavators, and under several operational conditions, tillage characteristics such as actual working speed, rotavating depth, rotavating width, actual field capacity, flow of tilled soil, soil inversion ratio, and pulverizing ratio were measured. In addition, loads characteristics like torque and required power of Power Take-Off (PTO) shaft were calculated. Results: The average rotavating depth was smaller than the nominal value for all rotavators, and the difference was the greatest in the plow-type rotavator. Nevertheless, the plow-type rotavator showed the largest rotavating depth. The rotavating width was the same as the nominal value of all rotavators. The flow of tilled soil at the same operational conditions was the greatest in the plow-type rotavator and was the smallest in the rotary-type rotavator. In the most commonly used gear conditions of L2 and L3, the average soil pulverizing ratio was the greatest in the rotary-type rotavator, and followed by crank-type and plow-type rotavators in order. In the gear L2 and L3, the plow-type rotavator also had the lowest average soil inversion ratio while the rotary-type and crank-type rotavators had the same soil inversion ratio each other. The average torque and power of PTO shaft in the gear L2 and L3 were the highest in the plow-type rotavator. The load spectra of PTO shaft applying rain flow counting method and Smith-Waston-Topper equation to the measured torque showed that the modified torque amplitude was the greatest in the crank-type rotavator. This may come from the large torque fluctuation of crank-type rotavator during tillage operations. Conclusions: The three types of rotavators had different tillage and loads characteristics. The plow-type rotavator had the deepest rotavating depth, the smallest soil inversion ratio, the largest soil pulverizing ratio and required PTO power. Also, the crank-type rotavator showed a large torque fluctuation because of their unique operational mechanism. This study will help the farmers choose a suitable type of rotavator for effective tillage operations.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1135-1145
• /
• 2020

The purpose of this study was to compare and analyze the emissions of SOx and NH3 for a 78 kW class agricultural tractor during agricultural operations. A real-time monitoring system was constructed for measuring the load data. The field test was conducted during plow and rotary tillage. The working conditions were selected with the transmission gears in M3 Low and M2 High for the plow tillage and L3 High and L3 Low for the rotary tillage. The engine torque and fuel consumption were measured using controller area network (CAN) communication, and the emissions of SOx and NH3 were calculated based on the fuel consumption. As a result of the field tests, the engine torque was higher for the plow tillage than for the rotary tillage. As the gear stage was increased, the engine torque became higher. The emissions of SOx and NH3 were higher for the plow tillage than for the rotary tillage because the fuel consumption increased. Moreover, the emissions of SOx and NH3 tended to be more distributed for the rotary tillage than for the plow tillage. To develop an emission factor for agricultural machinery, it is important to measure reliable emission data during agricultural operations. In a future study, we will collect various emission data using a portable emission measurement system during agricultural operations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.189-193
• /
• 1985

A field experiment was conducted to find out the effects of tillage methods on the changes of soil physical properties and rice yields. Silty clay loam soil was treated with six kinds of different tillage methods, cultivator plow-rotary, rotary, tractor deep plow-rotary, subsoiling-rotary, chisel plow-rotary and no-tillage, and Jinju variety of rice was cultivated. The results were summarized as follows; 1. Working efficiency was highest at chisel plow and the efficiencies were decreased with the order of deep plow, subsoiling, rotary, and cultivator plow. 2. Deep plow and chisel plow were considered as the useful treatments of physical properties to 20 cm depth soil and subsoiling was effective to 40 cm depth soil. 3. Rice yields were decreased 4% by rotary and 11% by no-tillage compare to cultivator plow-rotary but the yields were increased 5% by deep plow, 4% by subsoiling and 3% by chisel plow. As the results of all the data, welting efficiency, soil physical properties and rice yields, tractor deep plow was recommendable tillage method for rice paddy soils.

• Journal of Biosystems Engineering
• /
• v.36 no.6
• /
• pp.397-406
• /
• 2011

In this study, surveys on operation status of the 73 tractors with rated power of over 75 kW from six provinces in Korea were performed to obtain basic data required for development and efficient use of the high-power and high-performance tractors. And types of tractors and implements, operation crops, types of operations, annual operation areas, annual operation days, annual operation hours, operation speeds and widths, and problems and improvements in use were investigated. Most (91.7%) of the tractor surveyed were operated for forage and silage crops such as rice straw, whole barley, rye grass, reed canary grass, sudan grass, and the remains were operated for upland crops such as ginseng, sweet potato, potato, chinese cabbage, radish. Main operations of the tractors were cutting, baling, and wrapping for forage crops, plow tillage, rotary tillage, and manure spreading. About half (47.9%) of the tractors were used exclusively for forage crop harvesting such as forage crop cutting, forage baling, and bale wrapping, 24.5% of the tractors were used exclusively for plow or rotary tillage, and 27.4% of the tractors were used for both forage crop harvesting, and plow or rotary tillage. For the tractors with power ranges of 75~83, 89~94, 98~101, 113, 124 kW, average annual operation areas per tractor for plow tillage, rotary tillage, forage crop harvesting (cutting, baling, wrapping), and manure spreading operations were analyzed as 112.6. 144.8, 158.9. 390.0. 215.6 ha, respectively. and total average annual operation area per tractor was 171.3 ha. Average annual operation days per tractor for those operations were analyzed as 24.1, 28.9, 38.3, 55.4, 33.4, respectively, and total average annual operation days per tractor was 33.6. Average annual operation hours per tractor for them were analyzed as 260.0, 321.6, 408.1, 664.8, 413.8, respectively, and total average annual operation hours per tractor for the all tractors was 377.1. Ranges of operation widths of plow tillage, rotary tillage, forage crop cutting, forage baling, bale wrapping, and manure spreading operations were shown as 1.5~2.6, 2.3~3.0, 1.8~3.2, 1.8~2.0, 1.8~2.3, 3.1~6.6 m, respectively. Ranges of operation speed of plow tillage, rotary tillage, forage crop cutting, forage baling, bale wrapping, and manure spreading were shown as 6~9, 4~11, 9~16, 8~15, 8~17, 12~16 km/h, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.1
• /
• pp.89-97
• /
• 2012

Reduction of greenhouse gas (GHG) emissions from upland crop field as well as paddy field is being required, but little information on GHG emissions according to cultivation practices in upland field is available. Soil GHG emissions during the growing season were investigated in the field of three decades rotation and tillage treatments which were consisted of plow, chiesl tillage and no tillage in west central Indiana, USA in 2006. Seasonal cumulative $CO_2$ emissions were not different among treatments. $CH_4$ emission increased a little in plow tillage during early soybean growing season. Most of $N_2O$ emission occurred during early corn growing season after N-fertilizer application from mid June to mid July, and was significantly affected by tillage practices in which seasonal cumulative $N_2O$ emission was significantly higher under chisel tillage. $N_2O$ emission under no-tillage was lower about 64% and 39% than that under chisel tillage and plow tillage, respectively. No-tillage practice with rotation of corn and soybean seems to be promising in point of less GHG emission and less labor for cultivation without grain yield reduction.

• Korean Journal of Agricultural Science
• /
• v.51 no.3
• /
• pp.295-305
• /
• 2024

Due to the environment of irregular soil characteristic for agricultural fields, dynamic characteristic occurs in the tractor cabin during agricultural operations. Operator's fatigue is increased, and operation performance is decreased by these irregular environment conditions. This study was conducted to measure and analyze the dynamic characteristic of a tractor cabin, a major agriculture machinery, during agricultural operations. The specification of tractor used in the study was a 95 kW class tractor. To analyze the dynamic characteristics of the tractor cabin, the main agricultural operations, plow tillage and rotary tillage, were selected. To measure data of dynamic characteristic of the cabin, which continuously changes during operations, an Ellipse Series INS (inertia navigation system) with a built-in IMU (inertia measurement unit) was attached to the center of gravity of the cabin. During field test, the gear stages of plow tillage were B4 (4.3 km·h^-1) and B5 (5.6 km·h^-1), and the gear stages of rotary tillage were A3 (3.3 km·h^-1) and A4 (4.2 km·h^-1), which are the most commonly used. To analyze dynamic characteristic such as roll and pitch during operations according to the gear stages. As a result, the dynamic characteristics of pitch increased more than the dynamic characteristics of roll as the travel speed increased, and the dynamic characteristics of both agricultural operations were in the range of 2 to 5°.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.23-31
• /
• 2019

The purpose of this study was to evaluate the PTO severeness for an agricultural tractor during disk plow and rotary tillage. The PTO load measurement system was constructed with data acquisition and a PTO torquemeter. Field experiments were conducted at a combination of traveling speed (L3 Low, L3 High) and PTO speed (P1, P2). The load spectrum was generated using the rain-flow counting method, and the SWT method was used to consider the range and mean of the PTO load. The damage sum was calculated by applying a modified miner rule, which is a cumulative damage law. The relative severeness was expressed as the ratio of the lowest damage sum. Relative severeness was higher with the lower PTO gear stage, and higher driving gear stage and it was approximately 40-102 times higher for rotary tillage than disk plow tillage in the same gear stages. The relative severeness was 1010.12 in the rotary tillage under L3 High P1 based on the disk plow tillage under L3 Low P2.