• Journal of Environmental Health Sciences
• /
• v.19 no.4
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2007.10b
• /
• pp.78-83
• /
• 2007

The colors have a close to our life and there are many color names derived from plants in Japan. This study aimed to analyze relationship people and plants and investigated what the images of colors derived from plants related to the color names. Surveys on color images of abstract and concrete were conducted with adults who lived in the metropolitan area and in urban areas. The subjects were surveyed about images of similar colors derived from plants(3 type of similar two colors; pink, green and yellow) and asked to select a pair of color names(momo or pink, midori or green, yamabuki or lemon) corresponding to the color. The subjects were simultaneously presented with two similar colors and asked to give their perceptions of each color against 13 polar opposite pairs of terms or phrases using a Semantic Differential Scale, and asked to select the number of the 16 items concerned with life such as clothes and food. With the pink colors, many subjects did not feel opposite abstract images between these two similar colors and felt the same concrete images such as 'cosmetics' and 'clothes', and these color names such as momo and pink are confused. With the green colors and the yellow colors, many subjects felt opposite abstract images between these two similar colors such as 'natural - artificial' and 'rural - urban' and different concrete images such as 'plants' and 'plastics', and these two similar colors are distinguished by the color names such as 'midori - green' and 'yamabuki - lemon'. The results revealed that there are two patterns in the relationship colors derived from plants, color images and color names. In the pattern which images of colors derived from plants are connected with artificial things irrelevant to plants, the color names corresponding to the two similar colors are confused. On the other hand, in the pattern which images of colors derived from plants are connected with plants and artificial things, the two similar colors are distinguished by their color names. So demographics influenced the images of color, younger subjects compared with older tend to obviously distinguish images of colors derived from plants, and there are images of color influenced by the environment as a child. In both patterns, images of colors derived from plants are influenced by artificial things and natural colors are limited among many people. These results indicate that there are a few opportunities to see colors of plants which are full of variety. These results suggest that it is necessary to recognize colors derived from plants in relation to plants and to educate regarding the nature of plants, therefore landscape architecture focused on colors of plants is required.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.64-68
• /
• 2013

Non destructive testing(NDT) methods of electrofusion(EF) joints of thermoplastics pipes are required for fusion joint safety and for the long term reliability of a pipe system. Electrofusion joints, which are joined at the proper fusion process and procedures, may encounter defects due to the difference of ovality between pipes and coupling, improper fusion process or porosity result from electrofusion joining. These defects can cause the failure of pipeline and by extension, they can be caused the limit to expand the use of plastics pipes. This paper studies inspection results using ultrasonic imaging method for damaged polyethylene electrofusion joints. Gas was leaking from 250mm diameter polyethylene electrofusion joints at February 2004 which was electrofused at December 1994 and operation pressure was 2.45kPa. First, surface inspection was conducted and then in order to find the types of defects examination using ultrasonic imaging method was performed. Lack of fusion and inappropriate inserting for polyethylene pipes into electrofusion coupling were found and causes of the gas leak were judged that misalignment and insert defect. Cutting inspection was performed and each inspection results were compared to. Results of ultrasonic imaging method and cutting inspection were the same.

• Journal of Food Hygiene and Safety
• /
• v.32 no.2
• /
• pp.114-122
• /
• 2017

N-nitrosamines can be produced in the process of heating, processing, storage and packaging. Migration specifications for N-nitrosamines exist only for rubber baby bottle nipples, which are regulated by the Ministry of Food and Drug Safety (MFDS). There is no regulation for other food contact substances (FCS) and studies on N-nitrosamines migration from FCS are rather limited. A pilot study showed an increase in N-nitrosamines contents when cooking instant noodles. Thus, the migration from the packaging was suspected and it was necessary to monitor the migration of N-nitrosamines from food packaging materials and to examine the change in N-nitrosamines contents when cooking instant foods. Three N-nitrosamines, NDMA (N-nitrosodimethtlamine), NDEA (N-nitrosodiethylamine), NDBA (N-nitrosodibutylamine), were analyzed in migration test solutions from plastics such as polyethylene, polypropylene and polystyrene, papers and aluminium containers. In all test solutions, N-nitrosamines were detected less than method quantitation limits (MQLs). Food samples were also investigated to ensure that there is no effect from food contact substances when cooking instant foods. In retort sauces such as curry, black soybean sauce and tomato sauce, NDMA concentration was ranged from 0.54 to $3.81{\mu}g/kg$, but there were no significant differences between unheated and heated samples. However, the NDMA contents were significantly increased in most of the instant noodle samples tested when cooked (p < 0.05). No effects from the food contact substances or cooking water was observed. Only when the seasoning powder and noodles were cooked together was NDMA detected. Individual components (noodle, seasoning powder or dried vegetable) or other combinations such as noodles and dried vegetables did not generate N-nitrosamines. Therefore, it is speculated that NDMA may be formed from the precursors in noodles and seasoning powders when they are solubilized in a medium of water.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.1085-1093
• /
• 2017

Plasticizers are materials added to give softness and elasticity to plastics having rigid properties to give soft properties as products, and they are mainly added to high molecular materials to give flexibility to improve workability and to improve cold resistance, resistance to volatility and electrical properties. It is used for the purpose. Most plasticizers are inert liquids, similar in function to solvents but with high molecular weight and no volatility. In addition, when dissolved in petrochemical products, only the plasticizer is separated by the matrix effect with other compounds, and qualitative and quantitative analysis. In this study, qualitative and quantitative analysis of DOA and DOP, which are representative components of petrochemical products, were conducted using MD-GC/MS and developed an optimal plasticizer analysis method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.345-350
• /
• 2006

Recently we have interest on rice products developed by environment-friendly management. The technology of paper mulching was practised without herbicide in machine transplanting cultivation of paddy. A field experiment was conducted on Gangseo series (coarse loamy, mixed, nonacid, mesic family of Aquic Fluventic Eutrochrepts) at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Republic of Korea in 2004. This experiment was carried out to evaluate rice growth, weed control and nitrogen efficiency by the different controlled-release fertilizer levels in paper mulching transplanting. Treatments consisted of conventional fertilization, controlled-release fertilizer (100%, 80%, 60%) compared with nitrogen amount ($110kg\;ha^{-1}$) of conventional fertilization and no nitrogen plot. Mulching paper consisted of recycled paper which was coated with biodegradable plastics. There were no differences between conventional rice transplanting and paper mulching on missing hills. Weed occurrence and control were diverse and low as fertilizer amount increased. Plant height and tiller number per hill increased as fertilizer amount decreased. There were no difference between controlled-release fertilizer 80% and conventional fertilization plot on rice growth traits. Leaf color and $NH_4{^+}-N$ in soil had similar trends. There was no difference in yield between controlled-release fertilizer 80% and conventional fertilization plot. Agronomic nitrogen-use efficiency was high as fertilizer amount decreased. Therefore, these results suggested controlled-release fertilizer 80% should be optimum amount under paper mulching transplanting of rice considering weed control, rice growth and nitrogen efficiency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.6
• /
• pp.495-500
• /
• 2007

Recently we are interest in organic farming of rice. The technology of paper mulching was practised without herbicide in machine transplanting cultivation of paddy. A field experiment was conducted in Gangseo series (coarse loamy, mixed, nonacid, mesic family of Aquic Fluventic Eutrochrepts) at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Republic of Korea in 2004. This experiment was carried out to evaluate soil redox potential, weed control and rice growth by the different organic matter in paper mulching transplanting. Compost, rice straw and soiling rye were incorporated as organic matter. The nitrogen amount of controlled-release fertilizer (CRF) plot was 80% compared with nitrogen amount ($110kg\;ha^{-1}$) of conventional fertilization. Mulching paper consisted of recycled paper which was coated with biodegradable plastics. There were no difference between conventional rice transplanting and paper mulching on missing hills after organic matter application. Weed control were the highest at added soiling rye plot. The redox potential of soil was the lowest in rice straw + CRF 80% plot at tillering stage. The $NH_4{^+}-N$ in soil was the highest at soiling rye + CRF 80% tillering stage. There was no difference in yield between soiling rye + CRF 80%, compost + CRF 80% and conventional fertilization plot.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.197-204
• /
• 2021

This study investigated the smoke risk assessment of woods and plastics for construction materials, focusing on the smoke performance index-V (SPI-V), smoke growth index-V (SGI-V), and smoke risk index-VI (SRI-VI) according to a newly designed methodology. Spruce, Lauan, polymethylmethacrylate (PMMA), and polycarbonate (PC) were used for test pieces. Smoke characteristics of the materials were measured using a cone calorimeter (ISO 5660-1) equipment. The smoke performance index-V calculated after the combustion reaction was found to be 1.0 to 3.4 based on PMMA. Smoke risk by smoke performance index-V was increased in the order of PC, Spruce, Lauan and PMMA. Lauan and PMMA showed similar values. The smoke growth index-V was found to be 1.0 to 9.2 based on PMMA. Smoke risk by smoke growth index-V increased in the order of PMMA, PC, Spruce, and Lauan. COpeak production rates of all specimens were measured between 0.0021 to 0.0067 g/s. In conclusion, materials with a low smoke performance index-V and a high smoke growth index-V cause a high smoke risk from fire. Therefore, it is understood that the smoke risk from fire is high. It is collectively summarized by the smoke risk index-VI.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.281-289
• /
• 2021

Commercially used disposable cups undergo fragmentation in the environment and become microplastics (MPs). These MPs can be ingested by aquatic organisms and cause a range of adverse effects. We assessed the acute and chronic toxicity of disposable cup-derived MP fragments in Daphnia magna. MP fragments were identified as a polyethylene terephthalate (PET) fragment with a size of 33.18 ± 7.76 ㎛. The presence of three additives including 1- Propanone. 1-phenyl-3-[2-(phenylmethoxy)phenyl]-, p-Xylene and ethylbenzene was analyzed from MP fragments. The 48 h acute toxicity revealed that 20 % of immobilization and mortality were found at the highest concentration of PET MP (200 mg L^-1). The 21 d chronic toxicity revealed that PET MP fragments significantly (p < 0.05) more reduced survival rate (31 %), total offspring (52 %) in D. magna compared with control group. The developmental abnormality of offspring (3.5%) by PET MP fragments was significantly (p < 0.05) higher than control groups (0.3%). These results are possibly induced by gut blocking by ingestion of MP fragments and their longer retention time. These findings indicate that the fragmentation of disposable cups (PET polymers) into small-sized MP fragments pose a significant ecological risk to aquatic organisms. Further studies are required to elucidate the underlying toxicity mechanisms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.319-325
• /
• 2018

The use of 3D printing (Additive Manufacturing) technology has expanded from initial model production to the mass production of parts in the industrial field based on the continuous research and development of materials and process technology. As a representative polymer material for 3D printing, the polyamide-based material, which is one of the high-strength engineering plastics, is used mainly for manufacturing parts for automobiles because of its light weight and durability. In this study, the specimens were fabricated using Selective Laser Sintering, which has excellent mechanical properties, and the flexural characteristics were analyzed according to the temperature of the two types of polyamide 12 and glass bead reinforced PA12 materials. The test specimens were prepared in the directions of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ based on the work platform, and then subjected to a flexural test in three test temperature environments of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, PA12 had the maximum flexural strength in the direction of $90^{\circ}$ at $-25^{\circ}C$ and $0^{\circ}$ at $25^{\circ}C$ and $60^{\circ}C$. The glass bead-reinforced PA12 exhibited maximum flexural strength values at all test temperatures in the $0^{\circ}$ fabrication direction. The tendency of the flexural strength changes of the two materials was different due to the influence of the plane direction of the lamination layer depending on the type of stress generated in the bending test.