• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1244-1250
• /
• 2000

A method for simultaneous quantitative determination of plasticizers such as diethyl phthalate(DEP), di-n-propyl phthalate(DprP), di-n-butyl phthalate(DBP), di-n-pentyl phthalate(DPP), butylbenzyl phthalate(BBP), di-(2-ethylhexyl) phthalate(DEHP), dicyclohexyl phthalate(DCHP) and di-(2-ethylhexyl) adipate(DEHA), which are suspected as endocrine disruptors, in food was studied. A analysis method was optimized for the quantification of plasticizers in Jjambbong, which is a kind of fatty noodle, by using GC/FID. The detection limits of DEP, DprP, DBP, DPP, BBP, DEHP, DCHP and DEHA were 3.5, 5.3, 2.2, 2.2, 7.2, 1.7, 1.9 and 3.0 mg/kg, respectively. Much higher recovery was obtained by extraction with acetone/n-hexane(1:1) rather than hexane solvent system. The recovery of DEP, DprP, DBP, DPP, BBP, DEHP, DCHP and DEHA were 72.7, 85.9, 91.4, 97.1, 100.8, 103.2, 104.3 and 95.8% after 4 time extractions, respectively. The migration of plasticizers from PVC wraps into PVC wrap covered Jjambbong was conducted after shaking(120 rpm) for 30min at room temperature with chosen solvent system. It was found that the migration level of DEHA were 577, 706, 770 mg/kg into Jjambbong, respectively, while the other plasticizers were not observed.

• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.143-150
• /
• 2003

전분 완충재의 물리적, 기계적 특성을 개선하기 위한 노력들이 많이 이루어지고 있지만 기존의 플라스틱 완충재와 비교하면 더 많은 노력이 요구되어진다. 그래서 본 연구에서는 전분 완충재의 물리적 기계적 특성에 대한 유연제(plasticizers)와 첨가제(additives)의 영향을 규명하였다. 전분과 합성수지 그리고 여러 유연제 또는 첨가제를 혼합한 뒤 Brabender사의 일축 압출기를 이용하여 여러 축속도(60~120 rpm)에서 압출 가공한 후 물리적, 기계적 특성을 조사하였다. 전분 완충재의 밀도(bulk density)와 압축성(bulk compressibility)은 혼합물에서 물의 비율이 증가함에 따라 증가하였지만, 복원성(bulk resiliency)은 조금 감소하였다. 측정되어진 전분 완충재의 특성은 변형전분(hydroxypropylated starch)의 사용으로 향상되었다. 또한, glycerol, glycerol monostearate 그리고 alkylglucosides의 첨가도 전분 완충재의 밀도와 압축성을 증가시켰다. 염화철(II) 0.5%을 포함한 전분 완충재는 첨가제를 포함하지 않은 전분 완충재에 비하여 밀도 42%와 압축성 58%가 각각 감소한 반면, 복원성은 13%포인트 증가하였다. 변형전분과 염화철(II)이 첨가된 전분 완충재는 기존의 플라스틱 완충재에 비하여 밀도와 압축성은 떨어지지만, 대체 사용되어질 수 있는 것으로 판단되었다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.165-167
• /
• 2008

The performances of tetracycline based cation selective polymeric membrane electrodes of many sets with different plasticizers were investigated as the selectivity of ion-selective electrodes and optodes are greatly influenced by membrane solvent and also controlled by plasticizers. The membrane 1 with Bis(2-ethylhexyl) sebacate (DOS) and additive shows good potentiometric performance toward Ca2+ (slope: 27.8 mV per decade; DL: -4.52) including selectivity. Contrastingly, membrane 4 with Dibutyl phthalate (DBP) shows near-Nernstian response, it has also shown the best measuring range and detection limit for Ca2+ (29.5 mV and -5.10) and Mg2+ (24.4 mV and -5.04) and the least selectivity has been also observed between Ca2+ and Mg2+. When the membrane 1 and 4 were used together to flow system, we could determine the concentration of Ca2+ and Mg2+, simultaneously.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.341-348
• /
• 1992

PVC was compounded with various crosslinking agents, plasticizers and acrylonitrile butadiene rubber(NBR) to evaluate their effects on the radiation gel percent, elongation at break, heat distortion and heat shrinkage. Gel yield of PVC increased with increasing unsaturation levels per molecular weight of crosslinking agents while PVC containing NBR was more sensitive to crosslinking than PVC itself regardless of the types of crosslinking agents and plasticizers. It was found that gel percent was increased with increasing radiation dose, while heat distortion was decreased with increasing gel percent. Heat shrinkage was increased with decreasing stretching temperature and increasing annealing temperature.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.74-85
• /
• 2003

NENA(nitratoethyl nitramine) compounds, especially BuNENA(N-butyl-N-(2-nitratoethyl)-nitramine), are of high interest to both rocket propulsion and military high explosives because of low sensitivity to many forms of stimuli, although they are less energetic than conventional nitrate ester plasticizers. One of advantages in using NENAs is that they provide higher impulse at any given flame temperature than conventional propellants do. BuNENA has better thermochemical characteristics(low melting point and low glass transition temperature), therefore has less tendency to crystallize out of matrices. BuNENA was successfully synthesized in a high yield by reaction of n-butyl aminoethanol and 98% nitric acid followed by dehydrogenation of salt mixture by $Ac_2$/$ZnCl_2$.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.231-237
• /
• 2006

Nowadays the teabag is worldwide used for various products including green tea, tea, coffee, etc. since it is convenient for use. In case of outer packaging printed, however, there is a possibility that the plasticizers which is used for improvement in adhesiveness of printing ink may shift to inner tea bag. In this study, in order to monitor residual levels of plasticizers in teabags, we have established the simultaneous analysis method of 9 phthalates and 7 adipates plasticizers using gas chromatography (GC). These compounds were also confirmed using gas chromatography-mass spectrometry (GC-MSD). The recoveries of plasticizers analyzed by GC ranged from 82.7% to 104.6% with coefficient of variation of $0.6\sim2.7%$ and the correlation coefficients of each plasticizer was $0.9991\sim0.9999$. Therefore this simultaneous analysis method was showed excellent reproducibility and linearity. And limit of detection (LOD) and limit of quantitation (LOQ) on individual plasticizer were $0.1\sim3.5\;ppm\;and\;0.3\sim11.5\;ppm$ respectively. When 143 commercial products of teabag were monitored, no plasticizers analysed were detected in filter of teabag products. The migration into $95^{\circ}C$ water as food was also examined and the 16 plasticizers are not detected. In addition we carried out analysis of heavy metals, lead (Pb), cadmium (Cd), arsenic (As) and aluminum (Al) in teabag filters using ICP/AES. $Trace\sim23{\mu}g$ Pb per teabag and $0.6\sim1718{\mu}g$ Al per teabag were detected in materials of samples and Cd and As are detected less than LOQ (0.05 ppm). The migration levels of Pb and Al from teabag filter to $95^{\circ}C$ water were upto $11.5{\mu}g\;and\;20.8{\mu}g$ per teabag, respectively and Cd and As were not detected in exudate water of all samples. Collectively, these results suggest that there is no safety concern from using teabag filter.

• 한국전기화학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-59
• /
• 2002

• Polymer Science and Technology
• /
• v.6 no.2
• /
• pp.101-107
• /
• 1995

• 한국전기화학회:학술대회논문집
• /
• 2003.10a
• /
• pp.69-70
• /
• 2003