• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.502-507
• /
• 2010

The physical and mechanical properties and formability of sheet metals depend on preferred crystallographic orientations (texture). In this research work, the texture development and formability (plastic strain ratios) of AA1050 Al alloy sheets after 3 and 10 passes of asymmetric rolling and subsequent heat treatment were investigated. The plastic strain ratios of 10 passes asymmetrically rolled and subsequent heat treated samples are 1.3 times higher than those of the initial AA1050 Al alloy sheets. The ${\Delta}r$ of 10 passes of asymmetrically rolled and subsequent heat treated samples is 1/30 times lower than those of the initial AA1050 Al alloy sheets. The plastic strain ratios of 10 passes of asymmetrically rolled and subsequent heat treated Al sheets are higher than those of 3 passes ones. These results could be attributed to the formation of $\gamma$-fiber, ND//<111>, and the other texture components by means of asymmetric rolling in Al sheets.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.77-88
• /
• 2007

A micromechanics-based model to simulate the elastic and elastic-plastic behavior of granular soils is developed. The model accounts for the fabric anisotropy represented by the statistical parameter of the spatial distribution of contact normals, the evolution of fabric anisotropy as a function of stress ratio, the continuous change of the co-ordination number relating to the void ratio, and the elastic and elastic-plastic microscopic contact stiffness. Using the experimental data for metallic materials, the elastic-plastic contact stiffness is derived as a power function of the normal contact force as well as the contact force initiating the yielding of contact bodies. To quantitatively assess microscopic model parameters, approximate solutions of cross-anisotropic elastic moduli are derived in terms of the micromechanical parameters.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.06a
• /
• pp.11-23
• /
• 1994

Formability of sheet metals can be evaluated using tensile testing. Easily measured tensile properties such as yield strength, tensile strength, elongation, strain hardening exponent, strain rate sensitivity and plastic strain ratio are important parameters to evaluated the sheet formability. This paper briefly explains how these properties are related to deep drawability and stretchability. The plastic anisotropy of sheet metals is usually attributed to the crystallographic texture. However dislocation distribution may influence the anisotropy.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.485-490
• /
• 2005

Fingertip is the end of tactile organ and the part of hand most frequently injured. Fingertip injuries should be evaluated on an individual basis considering patient's overall physical condition, medical history, etiology, time of injury, and anticipated future hand use, and accordingly one of various methods of reconstruction should be selected. Complications after the reconstruction of fingertip injuries have been reported as pain, hypersensitivity, numbness, distal paresthesia, cold intolerance, and atrophy. From January to December 2002, dermofat grafts were performed on 15 patients to correct painful fingertips after injury. The thickness of the soft tissue of fingertip was measured both preoperatively and postoperatively with simple X-ray. To evaluate the improvement of pain, visual analogue scale(VAS) was used through the direct interview with patients. The average of postoperative follow-up period was 10.9 months. The average of increased soft tissue thickness ratio was 88.4%(2.3mm to 3.8mm). The average of preoperative VAS was 7.6, and postoperative VAS was 3. Dermofat graft on fingertip needs a further long-term follow-up study for the absorption ratio of dermofat, however, this procedure is simple and could be done under local anesthesia, and would be a useful alternative procedure to correct painful fingertips with the soft tissue atrophy after injury.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.414-418
• /
• 2011

BACKGROUND: Plastic mulches widely used in raised-bed culture mainly to conserve water, control weeds and raise soil temperature. The most widely used plastic mulch colour is black. Reflective red and far-red light can affect on growth and yield of various vegetable crops. Objectives of this study were to investigate the characteristics of reflective light of black and red plastic mulches, and to evaluate the reflective red and far-red light on the quality characteristics and yield of the Oriental melon (Cucumis. Melo L.) and tomato (Lycopersicon esculentum L.). METHODS AND RESULTS: Oriental melon and tomato were cultivated over the reflective red and black plastic mulches in plastic house. Reflected red and far-red light over the red plastic mulch were 2.6 times higher than those of black plastic mulch. Red to F-Red ratio of black plastic mulch, red plastic mulch and sunlight were 1.14, 0.93 and 1.16 respectively. Intensity of reflected red and far-red light over red plastic mulch were highest at surface height of 30 cm. The higher the height of the surface decrease the intensity of far-red light. Accordingly, Red to F-Red ratio were increased. Reflective red plastic mulch increased the weight of fruit and content of sugar in Oriental melon and tomato. CONCLUSION(s): Yield of Oriental melon over reflective red plastic mulch was higher than that of black plastic mulch. These results suggested that reflected red and far-red light over the red plastic mulch affected allocation of photosynthate in growing Oriental melon.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.469-474
• /
• 2009

Purpose: A lower facial contouring surgery has become a commonly performed procedure in Asia. Currently, mandibular angle sagittal ostectomy and botulinum toxin type A treatment are main procedures for aesthetic correction of a broad lower face. There are a few date to show the differences in the mandibular contouring changes between mandibular angle splitting ostectomy and botulinum toxin type A treatment. Facial golden mask is easy to apply, inexpensive, and relatively objective for evaluation of facial contour analysis. This study was designed specifically to compare the changes in lower face width after two different forms of lower facial contouring procedure using facial golden mask. Methods: Seventeen patients, aged 18 to 55 years (mean, 28.6 years), 15 women and 2 men, consented to the study and receive a contouring procedure of lower face. The patients were classified in to 2 groups. In group A, the sample consisted of 10 patients with a prominent squared mandibular angle and mandibular angle splitting ostectomy was performed. In group B, the sample consisted of 7 patients with masseteric hypertrophy and botulinum toxin type A treatment was performed. Photographs of the face were taken to record the facial change at preoperative and postoperative. The postoperative photographs were taken to considered maximal effect at 2 years after surgery in group A and 4.8 months after treatment in group B. The authors applied the facial golden mask to preoperative and postoperative photographs and horizontal ratio, which compares facial width with golden mask width, were calculated. We made an analysis of the result of horizontal ratio using SPSS. Results: Overall average horizontal ratio of pre- and postoperative photos of group A were 1.24 and 1.11, whereas overall average horizontal ratio of pre- and postoperative photos of group B were 1.19 and 1.12. The horizontal ratio decreased 10.24% in group A and 5.93% in group B. There was a statistically significant change in before and after treatment, but there was no significant change in comparing the group A and group B. Conclusions: The result from this study suggest that mandibular angle sagittal ostectomy and botulinum toxin type A treatment showed relatively satisfactory clinical effects on lower facial contouring treatment. There was no statistical significant difference within two lower facial contouring treatment. Facial golden mask is easy to apply, inexpensive, and relatively objective, so we think that facial golden mask is a good method for evaluation of lower facial contouring treatment.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.59-71
• /
• 2018

Since the generalized Hoek-Brown (GHB) function predicts the strength of the jointed rock mass in a systematic manner by use of GSI index, it is widely used in rock engineering practices. In this study, a series of 2D elasto-plastic FE analysis, which adopts the GHB criterion as a yield function, was carried out to investigate the radial convergence characteristics of circular tunnel excavated in the GHB rock mass. The effect of the plastic potential function on the elasto-plastic displacement was also examined. In the analysis, the wide range of both the $K(={\sigma}_h/{\sigma}_v)$ and GSI values are considered. For each K value, the variation of the ratio of sidewall displacement to roof displacement was calculated with varying GSI values and the obtained displacement patterns were analysed. The calculation results show that the displacement ratio significantly depends not only on the K value but also on the range of GSI value. In particular, for lower range of GSI value, the displacement ratio pattern calculated in the elasto-plastic regime is opposite to that predicted by the elasticity theory. In addition, the variation of the radial displacement ratio with GSI value for different types of plastic potential function showed similar trend.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3435-3439
• /
• 2007

The aim of this study is to find out the condition that generates maximum $H_2$ through the calculation of equilibrium model with conditions of pyrolysis gases of Refuse Plastic Fuel(RPF). This study deals with the computational simulation of a RPF gasification using an equilibrium model based on minimization of the Gibbs free energy. An equilibrium analysis was carried out to determine species composition of Syngas in RPF gasification and reactions to variation of temperature, $O_2$/Fuel ratio and Steam/Fuel ratio. Calculated results showed that $O_2$/Fuel ratio, Steam/Fuel ratio and temperature affected on mole fraction of $H_2$, CO.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.218-221
• /
• 2006

The past Korean Bridge Design Specifications have no limitation on the amount of lap splices of longitudinal bars in the plastic hinge zone of piers. A majority of bridge piers which have been non-seismically designed might have some lap splices in plastic hinge zone. Also a number of those piers in Korea have a low aspect ratio(height/section area). So, some problems such as low ductility behavior may happen. In this study, the real pier which was non-seismically designed and has a low aspect ratio was selected for the quasi-static tests. Two groups of full scaled RC pier models of which aspect ratios are about 2.26 and about 2.67 were fabricated. And then, quasi-static tests according to the drift level history method were implemented. From the test results, the failure of these test specimens have been shown in the complex shear-flexural or shear modes. The low aspect ratio and the lap splice have largely influenced on the seismic performance of bridge piers.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.1
• /
• pp.33-42
• /
• 2013

In this paper, a series of monotonic undrained shear tests were carried out on four kinds of sand-fine mixtures with various fines content. Two kinds of sands (Silica sand V3, V6) and fines (Iwakuni natural clay, Tottori silt) were mixed together in various proportions, while paying attention to the void ratio expressed in terms of sand structure $(F_c{\leq}F_{cth})$. The undrained shear strength of mixtures below the threshold fines content was observed so that as the plastic fines content increases, maximum deviator stress ratio decrease for dense samples while an increase is noted for loose samples. For non-plastic fines, the increase in the amount of fines leads to an increase in density of the soil, which results in an increase in strength. Then, the monotonic shear strength of the mixtures was estimated using the concept of granular void ratio. It was found that the shear strength of mixtures is greatly dependent on the skeleton structure of sand particles.