• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.21-32
• /
• 1996

흙의 응력-변형률 거동을 더욱 근사적으로 예측하기 위하여,소성 증분이론에 한계상태 토질역학의 개념을 도입한 것이 항복-경계면 소성 모델이다. 이 모텔은 등방 압밀 흙의 거동을 묘사하기 위하여 두개의 타원과 하나의 쌍곡선으로 구성되었다. 따라서 사용된 여러가지 매개변수로 인하여 이 모델은 매우 복잡하다. 그러므로,실제 지반 문제에 이 모델을 적용하기 위하여는 이론의 정확한 이해와 숙련이 요구된다. 본 논문에서는,이 모델에 사용된 여러 매개변수들 중항복-경계면 형상 매개변수 R과 A, 투영 중심 매개변수 C를 변화시켜 그 결과를 수치해석하였다. 최종적으로 단조하중과 주기하중에 대한 각각의 민감도를 분석하였고 각 매개변수 값의 범위를 제안하였다.

• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.65-73
• /
• 2000

본 연구에서는 미소변형률에서 대변형률까지의 거동을 모델할 수 있는 탄소성 구성모델을 개발하였다. 제안된 구성모델은 일반 등방경화규칙에 근거한 비등방 경화규칙과 전응력 개념을 토대로 개발하였다. 그리고 제안된 구성관계가 기존의 대표적 구성모델을 포함하고 있음을 수학적으로 입증하였다. 국내 화강풍화토에 대한 공진주시험, 비틂전단시험, 삼축시험 등 일련의 실내시험 결과를 이용하여 검증한 결과, 쌍곡선 모델 및 Ramberg-Osgood모델과 비교하여 제안된 모델은 미소변형률에서 대변형률까지의 거동을 더욱 일관되고 정확하게 모델할 수 있다. 또한 비틂전단시험 결과와의 비교에서는, 미소변형률 조건에서 나타나는 비선형성을 적합하게 예측할 수 있었다.

• Steel and Composite Structures
• /
• 제34권6호
• /
• pp.863-875
• /
• 2020

After medium or strong earthquakes, damage in the reduced portion of RBS connections occurs due to plastic deformations. The purpose of this paper is to numerically and experimentally investigate the reduced depth section connection as a replaceable fuse. In this regard, three commonly used rigid connections with RBS, a replaceable fuse with RBS, and a replaceable fuse with Reduced Depth Section (RDS-F) were evaluated. All specimens were subjected to quasi-static cyclic load until failure. Although the final strength of the RDS-F is lower than that of the other two, laboratory results showed that it had the maximum ductility among the three samples. The numerical models of all three laboratory samples were constructed in ABAQUS, and the results were verified with great accuracy. The results of more than 28 numerical analyses showed that the RDS-F sample is more ductile than the other specimens. Moreover, the thickness of the web and the plastic section modulus increasing, the final strength would be equal to the other specimens. Therefore, the modified RDS-F with replaceability after an earthquake can be a better alternative for RBS connections.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.371-384
• /
• 2020

A settlement prediction method based on shear wave velocity measurements and soil nonlinearity was recently developed and verified by means of centrifuge tests. However, the method was only applicable to heavily overconsolidated soil deposits under enlarged yield surfaces. In this study, the settlement evaluation method was refined to consider the stress history of the sublayer, based on an overconsolidation ratio evaluation technique, and thereby incorporate irrecoverable plastic deformation in the settlement calculation. A relationship between the small-strain shear modulus and overconsolidation ratio, which can be determined from laboratory tests, was adopted to describe the stress history of the subsurface. Based on the overconsolidation ratio determined, the value of an empirical coefficient that reflects the effect of plastic deformation over the elastic region is determined by comparing the overconsolidation ratio with the stress increment transmitted by the surface design load. The refined method that incorporate this empirical coefficient was successfully validated by means of centrifuge tests, even under normally consolidated loading conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.837-842
• /
• 2000

In the coiling process of helical steam generator tubes of integral reactor SMART, a considerable amount of spring back, which induces dimensional inaccuracy and difficulty in fabrication, has been arised. In this research, an analytical model was derived to evaluate the amount of the spring back for steam generator tubes. The model was developed on the basis of beam theory and elastic-perfectly plastic material property. This model was extended to consider the effect of plastic hardening and the effect of the tensile force on the spring back phenomena. Parametric studies were performed for various design variables of steam generator tubes in order to minimize the spring back in the design stage. A sensitivity analysis has shown that the low yield strength, the high elastic modulus, the small helix diameter, and the large tube diameter result in a small amount of the spring back. The amount of the spring back can be controlled by the selection of adequate design values in the basic design stage and reduced to an allowable limit by the application of the tensile force to the tube during the coiling process.

• 한국생산제조학회지
• /
• 제26권2호
• /
• pp.185-192
• /
• 2017

In this paper, we reviewed major design parameters for a solid type of deployable antenna and its structural design. We performed modal analysis for a single reflector panel made of aluminum and CFRP (carbon fiber reinforced plastic) to confirm the appropriateness of selected materials. We then predicted the elastic modulus of CFRP using the principles of unidirectional composite elasticity stiffness predictions such as the ROM (Rule of Mixture) and HSR (Hart Smith 10% Rule). To optimize the shape of the antenna reflector, a structural stiffness analysis was performed using derived numerical optimization factors. Six structural stiffness analyses were performed using the constructed experimental design method. The resulting optimal shape conditions are proposed to meet the structural stiffness requirements while minimizing weight.

• Geomechanics and Engineering
• /
• 제10권3호
• /
• pp.325-334
• /
• 2016

Rock salt is a near-perfect material for gas storage repositories due to its excellent ductility and low permeability. Gas storage in rock salt layers during gas injection and gas production causes the stress redistribution surrounding the cavity. The triaxial cyclic loading and unloading tests for rock salt were performed in this paper. The elastic-plastic deformation behaviour of rock salt under cyclic loading was observed. Rock salt experienced strain hardening during the initial loading, and the irreversible deformation was large under low stress station, meanwhile the residual stress became larger along with the increase of deviatoric stress. Confining pressure had a significant effect on the unloading modulus for the variation of mechanical parameters. Based on the theory of elastic-plastic damage mechanics, the evolution of damage during cyclic loading and unloading under various confining pressure was described.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.646-655
• /
• 1990

본 연구에서는 EPIES 프로그램의 상세한 내용과 이를 이용한 5가지 파괴역학 시편에 대한 사례 연구에 대하여 보고하고자 한다.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.427-434
• /
• 2004

Ferritic stainless steel is recently used in high temperature structures because of its good properties of thermal fatigue resistance, corrosion resistance, and low price. Tensile and low-cycle fatigue (LCF) tests on 429EM stainless steel used in exhaust manifold were performed at several temperatures from room temperature to 80$0^{\circ}C$. Elastic Modulus, yield strength, and ultimate tensile strength monotonically decreased when temperature increased. Cyclic hardening occurred considerably during the most part of the fatigue life. Dynamic strain aging was observed in 200~50$0^{\circ}C$, which affects the cyclic hardening behavior. Among the fatigue parameters such as plastic strain amplitude, stress amplitude, and plastic strain energy density (PSED), PSED was a proper fatigue parameter since it maintained at a constant value during LCF deformation even though cyclic hardening occurs considerably. A phenomenological life prediction model using PSED was proposed considering the influence of temperature on fatigue life.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.785-792
• /
• 2012

Foam structure is usually hard to model due to the complexity of the geometry of cells. So, many simplified models to represent complicated foam structures have been proposed, but most of them are not actually describe the random feature of the cell structure well. So, in this study, two dimensional isotropic and anisotropic closed cell structures of the foam were modeled using the concept of Voronoi cells. The elasto-plastic deformation behavior under compressive loads was investigated by finitie element analysis, and the results were compared with ideal honeycomb structure. In addition, the effect of anisotropy of Voronoi cell structures of the foam on Young's modulus and yield stress under compressive loads was studied.