• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.50-56
• /
• 2014

A technique based on the finite element method (FEM) is used in the simulation of metal cutting process. This offers the advantages of the prediction of the cutting force, the stresses, the temperature, the tool wear, and optimization of the cutting condition, the tool shape and the residual stress of the surface. However, the accuracy and reliability of prediction depend on the flow stress of the workpiece. There are various models which describe the relationship between the flow stress and the strain. The Johnson-Cook model is a well-known material model capable of doing this. Low-alloy steel is developed for a dry storage container for used nuclear fuel. Related to this, a process analysis of the plastic machining capability is necessary. For a plastic processing analysis of machining or forging, there are five parameters that must be input into the Johnson-Cook model in this paper. These are (1) the determination of the strain-hardening modulus and the strain hardening exponent through a room-temperature tensile test, (2) the determination of the thermal softening exponent through a high-temperature tensile test, (3) the determination of the cutting forces through an orthogonal cutting test at various cutting speeds, (4) the determination of the strain-rate hardening modulus comparing the orthogonal cutting test results with FEM results. (5) Finally, to validate the Johnson-Cook material parameters, a comparison of the room-temperature tensile test result with a quasi-static simulation using LS-Dyna is necessary.

• 지질공학
• /
• 제3권2호
• /
• pp.177-190
• /
• 1993

연약지반에서 성토나 교대등에 의한 편재하중이 작용하게 되면 지반중에는 침하, 측방변위, 융기 및 전단파괴 등의 큰 소성적인 전단변형이 발생하여 지반 및 구조물에 큰 피해를 주는 것을 많이 볼 수 있다. 본 연구는 이러한 연약지반에서 편재하중에 의한 지반의 제반변형에 대한 거동을 연구하기 위하여 기존의 이론적인 배경을 조사하고 모형실험을 통한 실측치를 이용하여 서로 비교분석하여 보았다. 모형실험은 먼저 모형재하장치를 제작하고 토조안에 연약한 흙시료를 채워 비배수상태에서 일정한 시간간격으로 하중단계를 증가시켜 가면서 변형의 상태를 관측하였다. 실험결과를 토대로 지반특성과 변위량의 관계, 한계하중 및 극한지지력, 지반의 소성유동의 상태 및 측방 유동압의 검토 등을 상세하게 분석하여 기존의 이론과 비교해 봄으로써 실제 연약지반상에서의 측방변형에 대한 원인을 규명함으로써 그로 인한 피해를 사전에 방지하고자 한다.

• 한국약용작물학회지
• /
• 제19권6호
• /
• pp.441-445
• /
• 2011

This research was conducted to investigate the influence of variouis organic substrates on growth and yield of organically grown ginseng seedlings in a shaded plastic house. In the investigation of optimal substrate, the eight substrate were formulated by adjusting blending rate of peatmoss, perlite, coir dust(coco peat), and vermiculite. Then, the changes in physico chemical properties of root substrates as well as their influences on the growth characteristics and yield were determined at six months after sowing. The elevation of the blending rate of peatmoss from 50% to 70% with decrease in the rate of inorganic component (mixture of perlite and vermiculite) from 50 to 30% resulted in the increase in container capacities and decrease in total porosities and air-filled capacities. The concentrations of $NH_4-N$, $P_2O_5$ and K increased as the incorporation rate of castor seed meal, phosphate ore, and langbenite, respectively, were elevated during the root medium formulations. The PPV-1 and PPV-4 substrates produced high stem length, stem diameter, shoot fresh weight, leaf area and root length among eight substrate. Root fresh weight was heaviest in PPV-4 compound nursery media. The results of this experiment will be utilized in the new substrate application for ginseng organic culture in shaded vinyl house.

• Clinical and Experimental Reproductive Medicine
• /
• 제39권4호
• /
• pp.153-160
• /
• 2012

Objective: The aim of this study was to compare vitrification optimization of mouse embryos using electron microscopy (EM) grid, cryotop, and thin plastic strip (TPS) containers by evaluating developmental competence and apoptosis rates. Methods: Mouse embryos were obtained from superovulated mice. Mouse cleavage-stage, expanded, hatching-stage, and hatched-stage embryos were cryopreserved in EM grid, cryotop, and TPS containers by vitrification in 15% ethylene glycol, 15% dimethylsulfoxide, 10 ${\mu}g/mL$ Ficoll, and 0.65 M sucrose, and 20% serum substitute supplement (SSS) with basal medium, respectively. For the three groups in which the embryos were thawed in the EM grid, cryotop, and TPS containers, the thawing solution consisted of 0.25 M sucrose, 0.125 M sucrose, and 20% SSS with basal medium, respectively. Rates of survival, re-expansion, reaching the hatched stage, and apoptosis after thawing were compared among the three groups. Results: Developmental competence after thawing of vitrified expanded and hatching-stage blastocysts using cryotop and TPS methods were significantly higher than survival using the EM grid (p<0.05). Also, apoptosis positive nuclei rates after thawing of vitrified expanded blastocysts using cryotop and TPS were significantly lower than when using the EM grid (p<0.05). Conclusion: The TPS vitrification method has the advantages of achieving a high developmental ability and effective preservation.

• 한국식품저장유통학회지
• /
• 제8권1호
• /
• pp.30-36
• /
• 2001

월동배추(품종 : 동풍)를 $0^{\circ}C$에서 저온저장중 선도 유지를 위하여 포장과 적입방법 개선에 대한 효과가 조사되었다. 저장과정중 배추의 상품성을 보았을 때 월동배추는 $0^{\circ}C$에 저온 저장한 경우 4개월 이상 저장, 출하가 가능한 것으로 여겨졌다. 포장용기간 저장성은 0.03mm 폴리에칠렌 플라스틱필름에 4포기씩 세로로 적입하여 플라스틱콘테이너에 저장한 경우가 기존의 폴리프로필렌 그물망과 철제파레트를 이용한 경우에 비하여 우수하게 나타났다. MAP 저장시 포장내의 가스 조성은 처리구간에 큰 유의적인 차이를 나타내지는 않았는데 대체로 산소 농도는 8.2~19.5% 정도, 이산화탄소는 0.35~8.58% 범위를 나타내었다. 저온저장중 비타민C, 환원당, 클로로필 색소는 계속 감소하였으며 폴리에틸렌 플라스틱필름과 콘테이너에 의한 MAP가 기존 저장방법에 비하여 10~20% 정도 선도 저하를 억제하는 효과를 가져왔다.

• 한국포장학회지
• /
• 제5권2호
• /
• pp.42-58
• /
• 1999

Packaging materials and articles that are used in food contact applications can transfer constituents in the foodstuffs. This kind of risk of possible health hazards to consumers has been generally recognized for a long time with the consequence of establishing corresponding food regulations in most developed countries. However, the language of these laws, their interpretation, and their level of enforcement vary from country to country. Accordingly, the actual migrating levels from packaging materials can be varied depending on the migration testing methods as prescribed in the national legislation in each countries. Therefore, there are needs of elimination of non-tariff trade barriers raised by sanitary and phytosanitary or technical measures under the Final Act of the UR Agreement. In this connection, the EU and USA are currently in an ongoing process of legislation harmonization to overcome potential barriers to free trade. In general, regulations governing component transfer in the USA are more complicated and comprehensive than similar regulations in Europe. In future, standard migration testing procedures for microwave heat susceptor materials and for the use of fatty food simulant should be established and also harmonized among countries. The objective of this investigation is to compare the current regulations for migration testing for plastic containers and packaging materials in USA, EU and Korea or Japan. For those regulations, Korean standards are required to be kept up with the international standards. By doing this, the related Korean regulation could be amended along with the worldwide progress for harmonization.

• 농촌의학ㆍ지역보건
• /
• 제21권1호
• /
• pp.97-105
• /
• 1996

본 조사는 쓰레기 종량제 실시에 대한 시민의 참여 정도와 감량화 및 규격봉투 사용 실태를 평가하고 그 문제점을 도출하여 포항시의 종량제 완전정착 정책과 쓰레기 처리 개선방향을 제시하고자 1995년 2월 6일과 2월 7일에 남 북구의 각각 4개 지역 (8개 지역)에서 배출된 일반가정의 생활 쓰레기를 조사하고, 이 지역의 배출 쓰레기 중에서 임의로 채취한 500 l에 대하여 물리적 조성을 조사하였다. 규격용기 사용율은 전체 지역 평균은 93.4%로 나타났으며 주거 형 태별로는 집단(아파트)지역이 95.6%로 단독주택 91.3%보다 높았다. 소득 정도별로는 저소득층과 중소득층이 각각 96.4%, 96.3%로 고소득층의 87.5%보다 높게 나타났다. 수거방식별 규격봉투 사용율은 아파트지역의 콘테이너방식이 95.6%, 타종수거 96.5%로 문전수거 86.1%보다 높았다. 지역별 쓰레기 성상(물리적 조성)표본 조사결과 음식물류가 57.4%로 가장 높았고 다음이 종이류가 18.7, 플라스틱류 10.3%, 섬유 7.9%, 병류 27%, 고철 캔류 1.4%. 나무 고무 0.7% 순으로 나타났다. 재활용품 함유율을 조사 한 바 전체 발생량의 20.2%를 차지하고 있으며, 남구 지역은 21.8%, 북구지역은 18.5%를 차지하였다. 주거형태별로는 단독주택보다 공동주택이 각각 25.7%, 14.7%로 공동주택이 분리 수거 배출이 잘되고 있고, 수거형태별로는 문전수거 34.3%, 타종수거 17.1% 그리고 콘테이너 수거 14.7% 순이였다. 각 지역별 20리터 용기 5개씩을 성상조사 결과 규격봉투안에 상품구매 포장이 46.3%로 가장 많이 들어 있었고, 실내 보관시 포장이 29.5%, 규격봉투외 포장이 24.2% 순으로 이중 봉투 상태였다. 규격봉투이외 1.9개(전체포장지의 75.8%)의 포장봉투가 더 필요했다. 발생 쓰레기의 전반을 차지하는 음식물 쓰레기의 사료화, 퇴비화 등 자원화 정 책과 재활용품의 적극적인 분리배출을 유도하여 친환경적 쓰레기처리시설에 적극적인 투자를 하이야 할 것이다.

• 생물환경조절학회지
• /
• 제29권2호
• /
• pp.130-140
• /
• 2020

본 연구는 대체에너지, 생태복원 및 밀원식물용 등으로 이용되어 묘목 수요가 증가되고 있는 쉬나무의 우량한 용기묘 생산을 위한 적정 차광수준을 구명하고자 실시하였다. 공시용기는 임업시설양묘용 플라스틱 용기(350ml/구)를 사용하였다. 차광수준은 전광과 전광의 35%, 55%, 75%로 처리하였다. 실험결과, 간장과 근원경 생장은 전광에서 현저히 높은 값을 보였으며, 차광수준이 강해질수록 낮은 생장값으로 조사되었다. 묘목의 뿌리형태특성을 측정한 결과 전광에서 뿌리발달이 가장 왕성하게 조사되었다. 건물생산량도 전광에서 가장 높았고 전체적으로 간장 및 근원경 생장 결과와 유사한 경향으로 나타났다. 묘목의 품질을 나타내는 지수인 QI(Quality Index)도 차광실험의 경우 전광에서 0.98로 가장 높게 조사되었다. 묘목의 엽록소 함량은 상대적으로 차광수준이 가장 높은 75% 차광처리에서 가장 높은 엽록소 함량을 보였으며, 광합성속도 및 수분이용효율은 전광에서 각각 8.48μmolCO₂·m^-2s^-1, 1.40μmolCO₂·mmolm^-1H₂O 가장 높은 것으로 조사되었다. 연구결과를 종합하면, 쉬나무 용기묘의 우량한 묘목생산을 위한 적정 차광수준은 전광(0%)으로 판단되며, 쉬나무 용기묘의 대량생산을 위한 기초자료로 활용될 것으로 기대된다.

• The International Journal of Costume Culture
• /
• 제7권2호
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• 기술혁신연구
• /
• 제15권2호
• /
• pp.61-81
• /
• 2007

A typical small firm in consumer goods sectors of developing countries is an OEM supplier to big MNCs. Lacking design and marketing capability, a small firm relies on the MNCs for survival but their long term growth is not guaranteed as the MNCs are always looking for, and ready to relocate to, cheaper production sites. In this light, we can say that there is something like "OEM trap" from which most firms from LDCs find difficult to move out (Lee 2005). In this situation, one way for long term growth and catch-up is to make a transition to the OBM (own brand manufacturer). But, the transition is not easy or even risky. This paper analyzes the cases of three companies in Korea to find out common features in their successful transition to OBM. They are Aurora World (a flush toy maker), Hankook Chinaware (a chinaware maker), and Hanacobi (a plastic-made food container maker with the Lock-and-Lock brand). These firms can be commonly characterized by 1) arranging access to external knowledge base and steady increase of in-house R&D efforts and capabilities leading to acquisition of formal IPRs and their management, and 2) establishment of global production networks with factories in lower-income countries as well as their own independent global marketing network.