Reinforced soil and Expanded Polystyrenes (EPS) mixture (RSEM) is a geomaterial which has many merits, such as light weight, wide strength range, easy for construction, and economic feasibility. It has been widely applied to improve soft ground, solve bridge head jump, fill cavity in pipeline and widen highway. Reutilizing dredged sediment to produce RSEM as earthfill can not only consume a large amount of waste sediment but also significantly reduce the construction cost. Therefore, there is an urgent need understand the basic stress-strain characteristics of reinforced dredged sediment-EPS mixture (RDSEM). A series of cyclic triaxial tests were then carried out on the RDSEM and control clay. The effects of cement content, EPS beads content and confining pressure on the cyclic stress-strain behaviour of RDSEM were analyzed. It is found that the three stages of dynamic stress-strain relationship of ordinary soil, vibration compaction stage, vibration shear stage and vibration failure stage are also applicative for RDSEM. The cyclic stress-strain curves of RDSEM are lower than that of control clay in the vibration compaction stage because of its high moisture content. The slopes of backbone curves of RDSEMs in the vibration shear stage are larger than that of control clay, indicating that the existence of EPS beads provides plastic resistance. With the increase of cement content, the cyclic stress-strain relationship tends to be steeper. Increasing cement content and confining pressure could improve the cyclic strength and cyclic stiffness of RDSEM.
Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.
국내 외에서 사면 붕괴 조기 경보를 위한 모니터링 및 자동측정기에 대한 많은 연구가 있지만 대부분 사면 붕괴 측정기가 사면의 표층에 설치되어 있어 사면의 붕괴 등 재난이 발생되기 전에 감지 및 경보가 가능한 시스템에 대한 연구는 거의 없는 실정이다. 본 연구에서는 록볼트에 센서를 부착하여 사면 붕괴 모의 실험을 수행하였고, 사면 붕괴 초기에 발생하는 사면 거동 특성을 분석하였다. 또한, 숏크리트를 타설한 사면과 자연사면, GFRP와 나선형 철근 록볼트를 사용하여 사면 조건 및 재료 조건에 따른 실험을 수행하고 결과를 비교 검토하였다. 본 연구는 급경사지 및 산사태 위험 지역 등 사면 붕괴 발생 전 조기 감지 및 경보를 통하여 사전에 대피할 수 있는 예 경보시스템 개발 시 기초자료로 활용 될 수 있을 것으로 판단된다.
International Journal of Naval Architecture and Ocean Engineering
/
제11권1호
/
pp.396-408
/
2019
The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.
Zhang, Wenfu;Gardner, Leroy;Wadee, M. Ahmer;Zhang, Minghao
국제강구조저널
/
제18권4호
/
pp.1440-1463
/
2018
The Wagner coefficient is a key parameter used to describe the inelastic lateral-torsional buckling (LTB) behaviour of the I-beam, since even for a doubly-symmetric I-section with residual stress, it becomes a monosymmetric I-section due to the characteristics of the non-symmetrical distribution of plastic regions. However, so far no theoretical derivation on the energy equation and Wagner's coefficient have been presented due to the limitation of Vlasov's buckling theory. In order to simplify the nonlinear analysis and calculation, this paper presents a simplified mechanical model and an analytical solution for doubly-symmetric I-beams under pure bending, in which residual stresses and yielding are taken into account. According to the plate-beam theory proposed by the lead author, the energy equation for the inelastic LTB of an I-beam is derived in detail, using only the Euler-Bernoulli beam model and the Kirchhoff-plate model. In this derivation, the concept of the instantaneous shear centre is used and its position can be determined naturally by the condition that the coefficient of the cross-term in the strain energy should be zero; formulae for both the critical moment and the corresponding critical beam length are proposed based upon the analytical buckling equation. An analytical formula of the Wagner coefficient is obtained and the validity of Wagner hypothesis is reconfirmed. Finally, the accuracy of the analytical solution is verified by a FEM solution based upon a bi-modulus model of I-beams. It is found that the critical moments given by the analytical solution almost is identical to those given by Trahair's formulae, and hence the analytical solution can be used as a benchmark to verify the results obtained by other numerical algorithms for inelastic LTB behaviour.
Korean piloti-type buildings are comprised of pilotis in the first story and shear walls in the upper stories. This vertical irregularity causes excessive lateral plastic deformation on the first story while the upper stories stay elastic. Meanwhile, asymmetric position of structural components such as core walls and columns of RC piloti-type buildings tends to produce torsional irregularities of the structures. Korean Building Code(KBC2016) requires the special seismic load and torsional amplification factor to apply to the piloti-type buildings lower than six-story or 20m if it has vertical and torsional irregularities when the building corresponds to seismic design category C or D. Many Korean low-rised RC buildings fall into the class. Therefore, the special earthquake load and torsional amplification factor are often applied to a building simultaneously. However, it has not been studied enough how much influence each parameter has on buildings with vertical and torsional irregularities at the same time. The purpose of this study is to evaluate the effect of factor special seismic load and torsional amplification on seismic performance of irregular buildings. In this study, a damaged 4th story piloti-type building by the Pohang earthquake was selected and the earthquake response analysis was carried out with various seismic design methods by the KBC 2016. The effect of the design parameters on seismic performance was analyzed by the dynamic analysis of models with special seismic load and torsional amplification factor based on the selected building. It was concluded that the application of the torsional amplification factor to the reference model to which special seismic design was applied, does not significantly affect the seismic performance.
최근 국내 해양레저에 대한 국민들의 관심이 높아지고 있고, 해외 시장 개척을 위한 레저선박 건조 및 제조업체들의 연구개발이 활발한 실정이다. 기존 레저보트에 많이 사용되어 온 재료 중에서 FRP와 알루미늄합금은 각각 장기간 사용으로 인한 흡습성과 재활용이 불가능한 환경문제와, 높은 열전도도와 고열에 약해 화재에 취약하다는 단점을 가지고 있다. 따라서 본 연구에서는 높은 비강도와 내식성을 갖춘 티타늄합금을 선체 재료로 선택하였고, 선박의 구조설계를 위해 충격하중에 의한 설계하중을 4가지 규정으로부터 산정하고, 이 하중에 대응하는 선체 판두께를 추정하였다. 국제표준인 ISO 12215-5, 이탈리아선급인 RINA Pleasure Yacht, 영국선급인 LR Special Service Craft, 한국선급인 KR 고속경구조선규칙을 비교 분석한 결과, 최대 슬래밍하중은 ISO, KR, LR, RINA의 크기 순서로 높게 계산되었고, 요구되는 판 두께도 ISO, KR, LR, RINA의 크기 순서로 추정되었다. 레저보트는 국제 규정에 적합한 설계와 인증이 필수적이므로, 각 규정에 대한 사용자의 이해를 높이고 해외 수출 선박의 설계 및 승인 절차에 도움이 되리라 생각한다.
This study investigated the effect of vegetation mat on plant growth and salt reduction in the soil treated with high concentration deicing salt. In order to measure soil chemical characteristics and plant growth, three native groundcover plants (Dendranthema zawadskii var. latilobum, Dendranthema boreale, and Kalimeris yomena) were grown in each of the three plastic containers (50.0 cm width × 35.0 cm length × 8.5 cm deep) with a high concentration treatment of calcium chloride deicing salt. There were two treatments: control, and BVM that combines B (blanket) and VM (vegetation mat). 1,600 g of soil was placed on the top of the drainage layer with 290 g of perlite, 100 seeds each of the three native plants with three repetitions were sowed, and 10 g/L of calcium chloride deicing salt was added in the treatment. As a result of the chemical properties of soil, soil in control treatment was acidic and soil electrical conductivity in BVM was the lowest. Also, exchangeable cations (K+, Ca2+, Na+, and Mg2+) in soil and all the three plants were significantly decreased in the BVM treatment. Meanwhile, the germination rate of Dendranthema zawadskii var. latilobum was the highest under high concentration deicing salt in compared to the two plants. Overall, three native groundcover plant growth was higher in the BVM than control treatment significantly. These results suggest that the treatment of blanket vegetation mat has a positive effect on soil and plant growth in soil damaged by deicing salt.
Recently, domestic leisure boats have been actively researching eco-friendly product development to enter the global market. Since the hulls of existing leisure boats are mainly made of fiber reinforced plastic (FRP) or aluminum, design techniques for securing structural safety by applying related materials have been mainly studied. In this study, an initial structural design safety assessment of a trimaran pontoon leisure boat with a modular hull structure and eco-friendly high-density polyethylene (HDPE) material was conducted, and sensitivity evaluation and optimization analysis for lightweight design were performed. The initial structural design safety assessment was carried out by creating a finite element analysis model and applying the loading conditions specified in the ship classification regulation to check whether the specified allowable stresses are satisfied. For the sensitivity evaluation, the influence of stress and weight of each hull structural member was evaluated using the orthogonal array design of experiments method, and an approximate model based on the response surface method was generated using the results of the design of experiments. The optimization analysis set the thickness of the hull structural members as the design variable and considered the optimal design formulation to minimize the weight while satisfying the allowable stress. The algorithm of the optimization analysis applied the Gradient-population Based Optimizer (GBO) to improve the accuracy of the optimal solution convergence while reducing the numerical cost. Through this study, the optimal design of a newly developed eco-friendly trimaran pontoon leisure boat with a weight reduction of 10% was presented.
본 연구는 폭염 시 어린이공원 내 포장 및 차양의 유형에 따른 온열환경을 규명하고자 하였다. 이를 위해 진주기상대에서 측정한 일 최고기온이 $35.9{\sim}36.8^{\circ}C$를 나타낸 2016년 8월 11일부터 8월 13일까지 3일간 진주시내 어린이공원 2곳(칠암어린이공원: $N\;35^{\circ}11^{\prime}1.4{^{\prime}^{\prim}}$, $E\;128^{\circ}531.7{^{\prime}^{\prime}}$, 표고: 38m; 가호제12어린이공원: $N\;35^{\circ}09^{\prime}56.8{^{\prime}^{\prime}}$, $E\;128^{\circ}6^{\prime}41.1{^{\prime}^{\prime}}$, 표고: 24m)의 모래밭, 고무칩포장지, 쉘터, 녹음지를 대상으로 미기상을 측정하였다. 미기상환경으로서 지상 60cm 높이에서 기온, 흑구온도, 상대습도, 풍속, 6방향의 장파 및 단파 복사를 측정하였고, 이를 바탕으로 열스트레스 지수인 WBGT와 UTCI를 산정 및 분석하였다. 또한 열화상카메라로 포장면과 놀이시설의 표면온도를 측정하였으며, 이를 바탕으로 단시간 피부접촉시 화상의 위험을 평가하였다. 연구결과는 다음과 같다. 어린이공원의 3일 시간 평균 최고 기온은 $36.6{\sim}39.4^{\circ}C$였으며, 모래밭에 비해 녹음에서 $2.8^{\circ}C$, 쉘터에서 $1.0^{\circ}C$ 및 $2.3^{\circ}C$ 낮게 나타났다. 시간 평균 최저 습도는 44~50%였으며, 모래밭이나 고무칩포장지에 비해 녹음에서 6%, 쉘터에서 4% 및 6% 높게 나타났다. 열사병위험지수 WBGT 값에 근거하면 폭염 시 어린이공원의 주간의 열사병 위험도는 높은 또는 극심한 정도로 나타났다. 3일 30분 평균 최고 WBGT 값은 $31.2{\sim}33.6^{\circ}C$였으며, 모래밭에 비해 녹음에서 $2.8^{\circ}C$, 쉘터에서 $2.3^{\circ}C$ 및 $1.0^{\circ}C$ 낮게 나타났으나, 차양에 의해서도 열사병 위험을 피할 수는 없었다. 체감더위지수 UTCI 값에 근거하면 폭염 시 어린이공원의 주간의 온열 스트레스의 범주는 매우 강한 또는 극심한 정도로 나타났다. 3일 30분 평균 최고 UTCI 값은 $39.9{\sim}48.1^{\circ}C$였으며, 모래밭에 비해 녹음에서 $7.8^{\circ}C$, 쉘터에서 $8.2^{\circ}C$ 및 $4.1^{\circ}C$ 낮게 나타났으나, 차양에 의해서도 극심한 또는 매우 강한 온열 스트레스를 강한 또는 적정한 온열 스트레스로 낮출 수는 없었다. 단시간 피부접촉에 의한 화상 온도 기준에 따르면, 놀이시설 및 포장면의 최고 표면온도가 스텐레스 스틸($70.8^{\circ}C$)은 무도장 철재 3초 $60^{\circ}C$, 고무칩포장($76.5^{\circ}C$)은 플라스틱 5초 $74^{\circ}C$, 청색 플라스틱 미끄럼판($68.5^{\circ}C$)과 앉음판($71.0^{\circ}C$)은 플라스틱 1분 $60^{\circ}C$ 기준을 초과한 것으로 나타났다. 하지만 그늘이 진 놀이시설의 표면온도는 햇빛에 노출된 놀이시설의 표면온도에 비해 $20^{\circ}C$ 내외로 낮게 나타나, 차양에 의해 화상의 위험을 현저하게 개선할 수 있을 것으로 판단된다. 폭염 시에는 어린이공원의 온열환경은 어린이들에게 높거나 극심한 열사병 위험에 빠지게 하고, 매우 강한 또는 극심한 온열 스트레스를 주기 때문에 보호자나 관리자가 어린이들의 어린이공원 이용을 제한해야 한다. 그리고 폭염시에는 어린이공원의 포장면 또는 놀이시설에 의한 화상의 위험이 매우 높으므로 이용 시 주의를 해야 하며, 화상의 예방을 위해서는 차양시설을 적극적으로 도입해야 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.