• Membrane and Water Treatment
• /
• v.4 no.2
• /
• pp.109-126
• /
• 2013

Surface modification by low-pressure ammonia ($NH_3$) plasma on commercial thin-film composite (TFC) membranes was investigated in this study. Surface hydrophilicity, total surface free energy, ion exchange capacity (IEC) and zeta (${\zeta}$)-potentials were determined for the TFC membranes. Qualitative and quantitative analyses of the membrane surface chemistry were conducted by attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy. Results showed that the $NH_3$ plasma treatment increased the surface hydrophilicity, in particular at a plasma treatment time longer than 5 min at 50 W of plasma power. Total surface free energy was influenced by the basic polar components introduced by the $NH_3$ plasma, and isoelectric point (IEP) was shifted to higher pH region after the modification. A ten (10) min $NH_3$ plasma treatment at 90 W was found to be adequate for the TFC membrane modification, resulting in a membrane with better characteristics than the TFC membranes without the modification for water treatment. The thin-film chemistry (i.e., fully-aromatic and semi-aromatic nature in the interfacial polymerization) influenced the initial stage of plasma modification.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.9
• /
• pp.103-108
• /
• 2008

In-plane shear tests were performed to investigate the shear property change of FRP by plasma modification. Graphite/epoxy prepreg was used as a test material and plasma source was a microwave (2.4GHz) type. Plasma was induced by oxygen gas and its flow rate was kept $4{\sim}5$sccm with low vacuum state of $10^{-3}$ Torr. Prepreg was stacked unidirectionally ($[0^0]_8$) after plasma modification. Wettability was determined by measuring a contact angle. The results showed that the contact angle was decreased from $86^0$ to $45^0$ after plasma modification. Shear strength was also improved by ${\sim}10%$. SEM examination was made on the fracture surface and functional group produced by the plasma modification was investigated by XPS.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.308-318
• /
• 2022

The surface modification and treatment using thermal plasma were reviewed in academic fields. In general, thermal plasma is generated by direct current (DC) and radiofrequency (RF) power sources. Thermal spray coating, a typical commercial process using thermal plasma, is performed by DC thermal plasma, whereas other promising surface modifications have been reported and developed using RF thermal plasma. Beyond the thermal spray coating, physical and chemical surface modifications were attempted widely. Superhydrophobic surface treatment has a very high industrial demand particularly. Besides, RF thermal plasma system for large-area film surface treatment is being developed. Thermal plasma is especially suitable for the surface modification of low-dimensional nanomaterial (e.g., nanotubes) by utilizing high temperature and rapid quenching. It is able to synthesize and modify nanomaterials simultaneously in a one-pot process.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.113-118
• /
• 2010

For a present study, woven type carbon fibers were surface-modified by oxygen plasma to improve adhesive strength between carbon fibers and epoxy. The change of hydrophilic properties by the plasma modification was investigated through the contact angle measurement and the calculation of surface energy of carbon fiber due to the oxygen plasma modification. FESEM and XPS analyses were performed to study the chemical and physical changes on the surface of carbon fibers due to the oxygen plasma modification. Pin-on-disk wear tests were conducted under dry condition using unmodified and plasma-modified carbon/epoxy composites to investigate the effect of plasma modification on the wear behavior of woven type carbon/epoxy composites. The results showed that the friction coefficient and the wear rate of plasma-modified carbon/epoxy composites were lower than those of unmodified carbon/epoxy composites, respectively. XPS analysis showed that new functional group of a carbonyl type was created on the carbon fibers by the $O_2$ plasma treatment, which enhanced adhesive strength between carbon fibers and epoxy, leading to improve wear properties

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.291-295
• /
• 2002

Atomic force microscopy(AFM) was used to study the polyethylene(PE) surfaces grafted and immobilized with acrylic acid by Ar plasma treatment. The topographical images and parameters including RMS roughness and Rp-v value provided an appropriate means to characterize the surfaces. The plasma grafting and immobilization method were a useful tool for the preparation of surfaces with carboxyl group. However, the plasma immobilization method turned out to have a limitation to use as a means of preparation of PE surface with specific functionalities, due to ablation effect during the Ar plasma treatment process.

• Nutrition Research and Practice
• /
• v.9 no.4
• /
• pp.379-384
• /
• 2015

BACKGROUND/OBJECTIVE: Apolipoprotein A5 gene promoter region T-1131C polymorphism (APOA5 T-1131C) is known to be associated with elevated plasma TG levels, although little is known of the influence of the interaction between APOA5 T-1131C and lifestyle modification on TG levels. To investigate this matter, we studied APOA5 T-1131C and plasma TG levels of subjects participating in a three-month lifestyle modification program. SUBJECTS/METHODS: A three-month lifestyle modification program was conducted with 297 participants (Age: $57{\pm}8years$) in Izumo City, Japan, from 2001-2007. Changes in energy balance (the difference between energy intake and energy expenditure) and BMI were used to evaluate the participants' responses to the lifestyle modification. RESULTS: Even after adjusting for confounding factors, plasma TG levels were significantly different at baseline among three genotype subgroups: TT, $126{\pm}68mg/dl$; TC, $134{\pm}74mg/dl$; and CC, $172{\pm}101mg/dl$. Lifestyle modification resulted in significant reductions in plasma TG levels in the TT, TC, and CC genotype subgroups: $-21.9{\pm}61.0mg/dl$, $-20.9{\pm}51.0mg/dl$, and $-42.6{\pm}78.5mg/dl$, respectively, with no significant differences between them. In a stepwise regression analysis, age, APOA5 T-1131C, body mass index (BMI), homeostasis model assessment-insulin resistance (HOMA-IR), and the 18:1/18:0 ratio showed independent association with plasma TG levels at baseline. In a general linear model analysis, APOA5 T-1131C C-allele carriers showed significantly greater TG reduction with decreased energy balance than wild type carriers after adjustment for age, gender, and baseline plasma TG levels. CONCLUSIONS: The genetic effects of APOA5 T-1131C independently affected plasma TG levels. However, lifestyle modification was effective in significantly reducing plasma TG levels despite the APOA5 T-1131C genotype background.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.32-43
• /
• 2008

• Textile Coloration and Finishing
• /
• v.4 no.4
• /
• pp.110-116
• /
• 1992

For the modification of PET surface, Perfluoropropene and Methyl alcohol were LT-plasma polymerized on the PET fabrics as thin films by means of 13.56 MHz radio frequency generator. The surface properties of PET fabrics were modified from hydrophobic to hydrophilic by application of the postplasma reaction of thin films. The evidence of the modification was identified by observation of the presence of hydroxy group in IR spectrum and the evaluation of degree of hydrophilicity was performed by measuring frictional static voltage of PET fabric with cotton fabric. For the case of modification by PFP, the result performed at the condition of 25 W, 70 m torr has shown to be effective, and for MeOH, result performed at the condition of 25 W, 100 m torr effective. The effect of hydrophilic surface modification of MeOH plasma polymer was superior to that of PFP-plasma polymer.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.15-19
• /
• 2012

The fabrication of internal diffraction gratings with photoinduced refractive index modification in transparent materials was demonstrated using low-density plasma formation excited by a femtosecond (130 fs) Ti: sapphire laser (${\lambda}_p$=800 nm). The refractive index modifications with diameters ranging from $1{\mu}m$ to $3{\mu}m$ were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than $2.0{\times}10^{13}W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred.