• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.440-446
• /
• 2005

A method is described for the determination of dibutyltin (DBT) in sediment by isotope dilution using liquid chromatography inductively-coupled plasma/mass spectrometry (LC-ICP/MS). To achieve the highest accuracy and precision, special attentions are paid in optimization and evaluation of overall processes of the analysis including extraction of analytes, characterization of the standards used for calibration and LC-ICP/MS conditions. An approach for characterization of natural abundance DBT standard has been developed by combining inductively-coupled plasma/optical emission spectrometry (ICP/OES) and LC-ICP/MS for the total Sn assay and the analysis of Sn species present as impurities, respectively. An excellent LC condition for separation of organotin species was found, which is suitable for simultaneous DBT and tributyltin (TBT) analysis as well as impurity analysis of DBT standards. Microwave extraction condition was also optimized for high efficiency while preventing species transformation. The present method determines the amount contents of DBT in sediments with expanded uncertainty of less than 5% and its result shows high degree of equivalence with reference values of an international inter-comparison and a certified reference material (CRM) within stated uncertainties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.822-833
• /
• 2011

A Xe plasma flat lamp, which has been noticed as a new eco-friendly LCD (liquid crystal display) backlight, requires the improvement of the luminance and the luminous efficiency although it has several advantages. To improve the performance of a lamp, it is necessary to understand the effects of discharge variables on the luminous characteristics of the lamp. Since it is difficult to diagnose a lamp discharge experimentally, the numerical analysis can be used instead. In this study, the luminous characteristics of a planar type Xe plasma flat lamp were analyzed with the variation of an input voltage and a pulse frequency. The numerical analysis of a lamp discharge was then performed using a RCT (relaxation continuum) model and a LFA (local field approximation) model. The comparison with the experimental results showed that the RCT model is valid for the numerical analysis of the flat lamp. The numerical analysis also showed that the modifications of a high frequency component and a voltage falling rate in the input voltage waveform could improve the luminous characteristics of the lamp.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.41-46
• /
• 2023

In this study, an Al₈₂Ni₇Co₃Y₈ (at%) bulk metallic glass is fabricated using gas-atomized Al₈₂Ni₇Co₃Y₈ metallic glass powder and subsequent spark plasma sintering (SPS). The effect of powder size on the consolidation of bulk metallic glass is considered by dividing it into 5 ㎛ or less and 20-45 ㎛. The sintered Al₈₂Ni₇Co₃Y₈ bulk metallic glasses exhibit crystallization behavior and crystallization enthalpy similar to those of the Al₈₂Ni₇Co₃Y₈ powder with 5 ㎛ or less and it is confirmed that no crystallization occurred during the sintering process. From these results, we conclude that the Z-position-controlled spark plasma sintering process, using superplastic deformation by viscous flow in the supercooled liquid-phase region of amorphous powder, is an effective process for manufacturing bulk metallic glass.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.281-291
• /
• 1998

An analytical method for the simultaneous measurement of trace Cu, Sn, and Bi in blood and urine has been investigated by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Microwave oven was used for the pretreatment of blood samples using nitric acid and hydrogen peroxide in a closedvessel digestion system with 1 mL whole blood for 8 minutes. Amberlite IRC-718 resin was used as a solid phase in solid-liquid extraction technique for the removal of matrix interferences such as Na, S, P, and other polyatomic ion species. Detection limits for Cu, Sn, and Bi by this method were 0.000375 ng/mL, 0.000297 ng/mL, and 0.000174 ng/mL, respectively. Recoveries of 99.1% for Cu, 102.5% for Sn, and 98.4% for Bi were obtained for the standard spiked NIST SRM 955a blood sample. The developed method was applied for whole real blood and urine samples.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.703-706
• /
• 2015

The interaction of plasma with liquid generates nitrogen species including nitrite (NO⁻₂). Therefore, the color developing capacity of plasma-treated water (PTW) as a nitrite source for meat curing was investigated in this study. PTW, which is generated by surface dielectric barrier discharge in air, and the increase of plasma treatment time resulted in increase of nitrite concentration in PTW. The PTW used in this study contains 46 ppm nitrite after plasma treatment for 30 min. To evaluate the effect of PTW on the cured meat color, meat batters were prepared under three different conditions (control, non-cured meat batter; PTW, meat batter cured with PTW; Sodium nitrite, meat batter cured with sodium nitrite). The meat batters were vacuum-packaged and cooked in a water-bath at 80℃ for 30 min. The typical color of cured meat developed in cooked meat batter treated with sodium nitrite or PTW. The lightness (L*) and yellowness (b*) values were similar in all conditions, whereas, the redness (a*) values of cooked meat batter with PTW and sodium nitrite (p<0.05) were significantly higher than the control. These data indicate that PTW can be used as a nitrite source in the curing process of meat without addition of other nitrite sources.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1343-1351
• /
• 2012

In this study, trends for five research areas of LED(Light Emitting Diode), OLED(Organic Light Emitting Diode), LCD(Liquid Crystal Display), PDP(Plasma Display Panel) and CRT(Cathode Ray Tube) are investigated using bibliometric analysis. The papers and patents citation data were extracted from Scopus and USPTO databases, respectively. We could figure out the research trends by the number of publications and citation information. We prospect the current interests and future trends by investigating the development process of the 5 research areas as function of time.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2005

The purpose of the present study was to evaluate the bioequivalence of two glimepiride tablets, Amaryl tablet (Handok & Aventis Korea, reference drug) and Mepiril tablet (Myungmoon Pharm. Co., Ltd., Korea, test drug), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (glibenclamide) to human plasma, plasma samples were extracted using 1mL of methyl tertiary butyl ether. Compounds extracted were analyzed by reverse-phase HPLC with multiple reaction monitoring (MRM) mode analyte detection. This method for determination glimepiride proved accurate and reproducible, with a limit of quantitation of 2 ng/mL in human plasma. Twenty-four healthy male Korean volunteers received each medicine at the glimepiride dose of 2 mg in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of glimepiride were monitored by a LC-MS/MS for over a period of 12 hr after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 12 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for Amaryl/Mepiril were log 0.9583-log 1.1357 and log 1.0570-log 1.2376, respectively. These values were within the acceptable bioequivalence intervals of log 0.80-log 1.25. Taken together, our study demonstrated the bioequivalence of Amaryl and Mepiril with respect to the rate and extent of absorption.

• Advanced Industrial SCIence
• /
• v.1 no.1
• /
• pp.16-22
• /
• 2022

Starting with cathode ray tubes, displays are forming markets in the order of active marix organic light emitting diode (AMOLED) after PDP (Plasma Display Panel) and LCD (Liquid Crystal Display). OLED is recognized as a key field for the development of each country preparing for the fourth industrial revolution, and especially Samsung Display and LG Display, which are the top industries in Korea, are leading the market with more than 90% of OLED shares. Currently, AMOLED has moved to the area that can be folded or bent. This technology is possible because TFT (Thin Film Transistor) and OLED may be formed on a flexible substrate. In the future, the technology will move to stretchable displays, and for this, the development of substrate materials is first, and then TFT and OLED devices should also be implemented with stretchable materials.

• Nutrition Research and Practice
• /
• v.7 no.5
• /
• pp.393-399
• /
• 2013

Asian populations are thought to receive significant health benefits from traditional diets rich in soybeans due to high isoflavone contents. However, available epidemiologic data only weakly support this hypothesis. The present study was carried out to assess the pharmacokinetics of isoflavones in South Korean women after ingestion of soy-based foods. Twenty-six healthy female volunteers (20-30 y old) consumed three different soy products (i.e., isogen, soymilk, and fermented soybeans) with different aglycone/glucoside ratios. Plasma and urine isoflavone concentrations were measured by high-performance liquid chromatography (HPLC) after ingestion of one of the soy products. Pharmacokinetic parameters were determined using the WinNonlin program. The area under the curve (AUC) for plasma daidzein levels of the soymilk group ($2,101{\pm}352ng{\cdot}h/mL$) was significantly smaller than those of the isogen ($2,628{\pm}573ng{\cdot}h/mL$) and fermented soybean ($2,593{\pm}465ng{\cdot}h/mL$) groups. The maximum plasma concentration ($C_{max}$) of daidzein for the soymilk group ($231{\pm}44$ ng/mL) was significantly higher than those of the isogen ($160{\pm}32$ ng/mL) and fermented soybean ($195{\pm}35$ ng/mL) groups. The half-lives of daidzein and genistein in the soymilk group (5.9 and 5.6 h, respectively) were significantly shorter than those in the individuals given isogen (9.6 and 8.5 h, respectively) or fermented soybean (9.5 and 8.2 h, respectively). The urinary recovery rates of daidzein and genistein were 42% and 17% for the isogen group, 46% and 23% for the fermented soybean group, and 33% and 22% for the soymilk group. In conclusion, our data indicated that soy products containing high levels of isoflavone aglycone are more effective for maintaining plasma isoflavone concentrations. Additional dose-response, durational, and interventional studies are required to evaluate the ability of soy-based foods to increase the bioavailability of isoflavones that positively affect human health.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.135-140
• /
• 2020

Since the process gas that is essential in the semiconductor process is a harmful gas, it is an essential task to solve it in an environmentally friendly manner. Currently, the cleaning technology used in the semiconductor process is mostly a wet cleaning based on hydrogen peroxide developed in the 1970s, and the SC-1 cleaning liquid for removing particles on the surface uses a mixture of ammonia and hydrogen peroxide. Therefore, environmental problems are caused, and economic problems caused by excessive water use are also serious. For this reason, the products developed through this study are used to decompose the process harmful gas from the chamber outlet into a harmless gas before entering the vacuum pump, or by incineration and the gaseous components are deposited on the pump. I want to solve the problem. In this paper, CPS (Confined Plasma Source) is proposed to save environment and improve productivity by replacing harmful gases (N2, CF4, SF6⋯., Etc) which are indispensable in semi-contamination process with innocuous gases or incineration with plasma, to study.