• Korean Journal of Clinical Laboratory Science
• /
• v.44 no.3
• /
• pp.147-154
• /
• 2012

Metabolic syndrome and homocysteine are associated with increased independent risk factors of cardiovascular disease. We investigated the difference between the degree of obesity, metabolic syndrome risk factors, plasma homocysteine and anthropometric obesity factors. Totally 398 participated in a medical check-up program were selected for this study. Subjects were categorized into three groups according to the number of metabolic syndrome components present as defined by the NCEP-ATP III criteria; Absent (0 criteria, n=124), Pre-MetS (1-2 criteria, n=220) and MetS (${\geq}3$ criteria, n=54). Body mass index (BMI) is a measure used to distinguish between normal weight, overweight and obesity. MetS presented higher homocysteine than Absent (p<.05) and obesity higher than normal weight (p<.01). When Absent+Pre-MetS was used to classify obese or not, obesty presented higher homocysteine than non-obese (p<.05). Further homocysteine levels positively correlated with weight, BMI, waist circumference, hip circumference and waist-hip ratio (WHR). Especially WHR is not only MetS (r=0.378, p<.001) but also Absent+Pre-MetS (r=0.305, p=0.029) significantly positively correlated with homocysteine. The results of our study indicate that homocysteine is related closely to obesity. Although obesity has not been diagnosed with metabolic syndrome, obesity related with increased homocysteine.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.61-64
• /
• 2003

This study was conducted to investigate the chemical characteristics of $PM^{10}$ at Anmyeon-do during the periods from January 1998 to December 2001. The $PM^{10}$ samples ($PM^{10}$) were collected by High Volume Air sampler (HVAS). The measured items were mass concentration of $PM^{10}$ with the major ions ($Cl^{-}$, ${SO_{4}}^{2-}$, ${NO_3}^{-}$, ${Mg}^{2+}$, ${Ca}^{2+}$, ${K}^{+}$etc.) and metallic elements (AI, Fe, Mn, Cr, Zn, Pb etc.). The chemical analysis of major ion components were made by Ion Chromatography (DX-500) and that of metallic elements were made by Inductively Coupled Plasma Spectrometer (ICP-AES, ICP-Mass). The average mass concentration of $PM^{10}$ increased substantially during the heavy dust periods (Asian Dust cases). For water-soluble ions, concentrations of ${Ca}^{2+}$, ${SO_{4}}^{2-}$ and ${NO_3}^{-}$ were remarkably enhanced. Concentrations and mass fraction of crustal elements such as Na, Mg, Ca, Fe, Mn were highly elevated, but those of pollution-derived heavy metals were appreciably decreased. The factor analysis was conducted in order to make the large and diverse data set as manageable levels and to qualitatively examine the relationship between the variables.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1476-1477
• /
• 2008

This paper reports on a flexible flap valve actuated by electromagnetic force under a constant pressure source. The flexible flap valve consists of the three main components: a flexible flap with a steel disk embedded in PDMS, an electromagnetic actuator and two glass plates with inlet and outlet. Sealing lip structures for improving the valve characteristics are added on the outlet of the bottom glass substrate. The flap valve is fabricated by the spin-coating process, the EDM process, SU-8 mold process and oxygen plasma treatment. The dimension of an assembled flap valve is $12mm{\times}20mm{\times}28mm$. The stroke volume of the flap valve is measured for various pressures and open times. When the input voltage of 30 V is applied for 0.33 s, the minimum stroke volume of the flap valve is 70 ${\mu}L$ at 50 kPa.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1098-1102
• /
• 2003

Vacuum vessel of the KSTAR(Korea Superconducting Tokamak Advanced Research) tokamak is a fully welded structure with D-shaped cross-section. According to the requirements of the physics design, sixteen horizontal ports, sixteen slanted ports, sixteen baking and cooling ports, and twenty-four top and bottom vertical ports are designed for the diagnostics, plasma heating, vacuum pumping, and baking and cooling. Bellows on these ports are used for flexible components to absorb the relative displacement due to the vacuum vessel thermal expansion and the electromagnetic force between the vacuum vessel and the cryostat ports. Fatigue strength evaluation was performed to decide the dimension of the bellows. In order to assure the quality of the bellows, a prototype bellows for the neutral beam injection port has been fabricated and tested prior to main fabrication. It was conformed that the prototype bellows has sufficient fatigue strength and vacuum reliability in the expected load conditions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.107-113
• /
• 2012

This paper proposes a PDS(Power Transfer Display separation) method for AC-PDP. The proposed PDS method can transfer power and perform an energy recovery by a power conversion circuit operates differently depending on the time. As a result, it uses less of components than conventional PDP power supply and sustain circuit use. Moreover, the manufacturing process can be streamlined. Therefore, the proposed method is suitable for low cost PDP module. To confirm the operation, validity and features of the proposed PDS method, experimental results from a prototype for 42-in diagonal PDP are presented.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.1
• /
• pp.76-84
• /
• 1996

This study was carried out to evaluate the effect of Ganoderma lueuidum (GL) water extract on fat accumulation in the fatted rats Induced by the oral high fat administration for six weeks. Total cholesterol, neutral fat and epididymal fat pad of GL groups were lower than the control group. On the other hand, high density lipoprotein(HDL) -cholesterol was somewhat higher in GL than In the control group. In addition, the same result as the above case was obtained when examining adipose for liver and epididymal fat components. During the feeding experiment, level of low density lipoprotein(LDL) and very low density lipoprotein (VLDL) increased while HDL was decreased in the control group as compared with normal group. The decree of LDL and VLDL was decreased, but HDL was increased in GL group as compared with the control group. Experiment group showed the Increased excretion as compared with the control group, in the excretion. Based on the above results, It was shown that it is possible to improve fat accumulation induced by high fat dietary through using the oral administration of Ganoderma lueidum boiling extract solutions.

• Korean Journal of Veterinary Service
• /
• v.34 no.1
• /
• pp.87-93
• /
• 2011

This study was conducted to investigate effects of honeybee venom (Apis mellifera L. BV) on the calving, the growth performance and blood chemistry occurrence of Hanwoo calves. A total of twenty, a 3 day old male experimental calves were allocated into four groups, BV treated (0.05 mg/kg, 0.1 mg/kg and 0.2 mg/kg BV, n=5, respectively) and non-treated (n=5, Control) of Hanwoo calves in Icheon, Kyonggi province. Treatment of BV in calves increased body weight and weight gain during 60 days compared with control group. The concentrations of IgG in blood were significantly increased in BV groups compared with control at 60 days after treatment with BV. Cholesterol and glucose concentrations in BV group were significantly lower with control at 60 days. There were no differences in plasma biochemical components including aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphate (AKLP), total protein, albumin, globuline, total bilirubin, creatinine, blood urea nitrogen (BUN) and $Ca^+$. In conclusion, the BV treatment had effect on growth, the score of the calf scours and blood biochemical profile.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.387-390
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for 2 inch SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECVD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using IR camera and SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of $5.3 kgf/cm^2$ to $15.5 kgf/cm^2$

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.4
• /
• pp.354-361
• /
• 2008

The dielectric characteristics of low-k interlayer dielectric materials was fabricated by plasma enhanced chemical vapor deposition (PECVD). BTMSM precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1sccm step in the constant flow rate of 60 sccm $O_2$ in process chamber. Manufactured samples are analyzed components by measuring FT/IR absorption lines. Decomposition each Microscopic structures through two-dimensional correlation analysis about mechanisms for the formation of SiOCH in $SiOCH_3$, Si-O-Si and Si-$CH_3$ bonding group and analyzed correlation between the micro-structure of each group. It is a tendency that seems to be growing of Si-O-Ci(C) bonding group and narrowing of Si-O-$CH_3$ bonding group relative to the increasing flow-rate BTMSM. The order of changing sensitivity about changes of flow-rate in Si-O-Si(C) bonding group is cross link mode$(1050cm^{-1})$ $\rightarrow$ open link mode$(1100cm^{-1})\rightarrow$ cage link mode $(1140cm^{-1})$.