• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.822-833
• /
• 2011

A Xe plasma flat lamp, which has been noticed as a new eco-friendly LCD (liquid crystal display) backlight, requires the improvement of the luminance and the luminous efficiency although it has several advantages. To improve the performance of a lamp, it is necessary to understand the effects of discharge variables on the luminous characteristics of the lamp. Since it is difficult to diagnose a lamp discharge experimentally, the numerical analysis can be used instead. In this study, the luminous characteristics of a planar type Xe plasma flat lamp were analyzed with the variation of an input voltage and a pulse frequency. The numerical analysis of a lamp discharge was then performed using a RCT (relaxation continuum) model and a LFA (local field approximation) model. The comparison with the experimental results showed that the RCT model is valid for the numerical analysis of the flat lamp. The numerical analysis also showed that the modifications of a high frequency component and a voltage falling rate in the input voltage waveform could improve the luminous characteristics of the lamp.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.7-12
• /
• 2023

The edge ring placed on the outside of the electrostatic chuck (ESC) is a key component for protecting the ESC and controlling the etching uniformity of the edge of the wafer. Therefore, it is very important to understand the etching phenomenon of edge rings for edge ring management and equipment homeostasis. In this study, a specimen with SiO₂ hard mask and underlying Si mold was installed on the edge ring surface and the etching results were measured by varying the edge ring 2MHz RF power. By developing PI-VM model with high prediction accuracy and analyzing the roles of key parameters in the model, we were able to evaluate the effect of plasma and sheath characteristics around the edge ring on edge ring erosion. This analysis method provided information necessary for edge ring maintenance and operation.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.349-360
• /
• 2023

Common carp (Cyprinus carpio) (Weight 23.05 ± 6.98 g, Length 12.65 ± 1.38 cm) were exposed to waterborne nitrite at 0, 50, 100, 200, 400 and 800 mg NO₂ ^-/L for 96 hours. The lethal concentration 50 (LC₅₀) of C. carpio exposed to waterborne nitrite was 398.6 mg NO₂ ^-/L. Hemoglobin, hematocrit and RBC count were significantly decreased by waterborne nitrite exposure. The MCV (mean mean corpuscular volume) (µl), MCH (mean corpuscular hemoglobin) (pg) and MCHC (mean corpuscular hemoglobin concentration) (%) were significantly increased. The inorganic component, plasma calcium, was significantly increased, and the organic components such as plasma cholesterol and total protein were significantly increased showing a similar tendency with calcium. In enzymatic components, the AST and ALT were also significantly increased by nitrite exposure. The results of this study indicate that exposure to nitrite can affect the survival and hematological physiology of C. carpio.

• Textile Coloration and Finishing
• /
• v.27 no.1
• /
• pp.18-26
• /
• 2015

para-aramid fibers were treated by atmosphere air plasma to improve the interfacial adhesion. The wettability of plasma-treated aramid fiber was observed by means of dynamic contact angle surface free energy measurement. Surface roughness were investigated with the help of scanning electron microscopy and atomic force microscopy. The tensile test of aramid fiber roving was carried out to determine the effect of plasma surface treatments on the mechanical properties of the fibers. A pull-out force test was carried out to observe the interfacial adhesion effect with matrix material. It was found that surface modification and a chemical component ratio of the aramid fibers improved wettability and adhesion characterization. After oxygen plasma, it was indicated that modified the surface roughness of aramid fiber increased mechanical interlocking between the fiber surface and vinylester resin. Consequently the oxygen plasma treatment is able to improve fiber-matrix adhesion through excited functional group and etching effect on fiber surface.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.661-667
• /
• 2008

In this study, cholesteric liquid crystal (CLC) was synthesized and applied as a polarizing component on the optical film of back light units (BLU) for LCDs. After mixing CLC with nematic liquid crystal, this mixture was fulfilled in the module consisting of two films and then its amplifying efficiency and polarizing ability for a planarly emitted light were examined to apply as a BLU polarizer film for increasing the brightness of light. The properties of CLC compound were tested by UV/Visible spectroscopy and polarizing optical microscopy (POM). Flexible spacer was made by linear carboxylic acid group of cholesteric derivatives between cholesterol mesogen units for one-axis orientation in each layer. The CLC containing film could be used as a module to increase the ability of polarization and to enhance brightness of BLU and to widen wavelength range by stacking the films.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.125-133
• /
• 2020

An innovative method for separating overlapping latent fingerprints, using laser-induced plasma spectroscopy (LIPS) combined with multivariate analysis, is reported in the current study. LIPS provides the capabilities of real-time analysis and high-speed scanning, as well as data regarding the chemical components of overlapping fingerprints. These spectra provide valuable chemical information for the forensic classification and reconstruction of overlapping latent fingerprints, by applying appropriate multivariate analysis. This study utilizes principal-component analysis (PCA) and partial-least-squares (PLS) techniques for the basis classification of four types of fingerprints from the LIPS spectra. The proposed method is successfully demonstrated through a classification example of four distinct latent fingerprints, using discrimination such as soft independent modeling of class analogy (SIMCA) and partial-least-squares discriminant analysis (PLS-DA). This demonstration develops an accuracy of more than 85% and is proven to be sufficiently robust. In addition, by laser-scanning analysis at a spatial interval of 125 ㎛, the overlapping fingerprints were separated as two-dimensional forms.

• Journal of Surface Science and Engineering
• /
• v.50 no.5
• /
• pp.366-372
• /
• 2017

Plasma electrolytic oxidation(PEO) has attracted attention as a surface treatment which has high wear resistance and corrosion resistance. PEO is generally considered as cost-effective, environmentally friendly and superior in terms of coating performance. Most of studies about the PEO processes have been applied to light metals such as Al and Mg. Because the strength of Al and Mg is weaker than that of steel, there is a limit to the application. In this study, PEO process was used to form oxide coatings on Hot dipped aluminized(HDA) steel and the characteristics of the coating film according to the PEO current density were studied. The morphology was observed by SEM and component was analyzed by using EDS. The corrosion behaviors of PEO coating films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of PEO process current density, the pore size of the coating surface and the thickness of coating increased. It was confirmed that no Fe component was present on the coating surface. PEO coating films obviously showed good corrosion resistance compared with HDA. It is considered that the PEO coating acts as a barrier to protect the base material from external factors causing corrosion.

• Journal of Society of Preventive Korean Medicine
• /
• v.11 no.1
• /
• pp.45-53
• /
• 2007

Homocysteine is a sulfur amino-acid produced during the metabolism of the essential amino acid methionine. Moderately increased plasma total homocysteine concentration have been implicated as a risk factor for occlusive vascular disease. Smoking is known to be one of the most significant factors leading to elevated plasma homocysteine concentration. However, the main component of a cigarette, nicotine has been not studied whether it is linked directly to the increase of homocysteine concentration in blood. The metabolism of homocysteine is closely linked to that of its cofactors, folate. Here, the effects of nicotine and folic acid on amount of plasma homocysteine were studied. The concentration of homocysteine was increased by about 70% in rat plasma after nicotine treatment for one month. This increased concentration of homocysteine was reduced by about 60% at 6 hours later after folate treatment. Thus, nicotine should be directly involved in increasing the concentration of plasma homocysteine. Also it is suggested that these results can be and applied and used for controlling withdrawal symptoms after stopping smoking as one of oriental medicine formulas.

• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.5-15
• /
• 1994

The purpose of this study was to examine the effect of electroanalgeia and $\beta-endorphin$ action by acupuncture-like (Lof/Hil) transcutaneous electrical nerve stimulation (TENS) applied to acupuncture points. Twelve healthy adult male aged between 19 ann 25 were randomly assigned to TENS group (n=6) and naloxone group (n=6). Subjects of both groups were strongly stimulated TENS with 4 pps and $200{\mu}s$ for 30 minutes on the LI 3 and LI 10 meridian points of dominant am. Naloxone group was injected naloxone hydrochloride before TENS application. The experimental pain threshold was measured by chronaxie meter CX-2 on the distal end of radius just before and after TENS application. The levels of plasma $\beta-endorphin$ and ACTH. serum cortisol and urinary 17-OHCS were analyzed by radioimmunoassay (RIA) kits before and after TENS application. In TENS group, there was a significant increase of experimental pain threshold (p<0.01), plasma $\beta-endorphin$ level (p<0.05), serum cortisol level (p<0,001) and urinary 17-OHCS levels (p<0.05) after TENS application. The plasma ACTH level was not significantly increased, but it showed an increasing tendency. In naloxone group, although there was a decreasing trend, ACTH and cortisol level did not show a significant change, but $\beta-endorphin$ and 17-OHCS level were significantly decreased (p<0.01). The result of this study stewed that acupuncture-like TENS induced analgesic effect, such that the levels of plasma $\beta-endorphin$, plasma ACTH, serum cortisol and urinary 17-OHCS were concomitantly increased with experimental pain threshold. It is suggested that the analgesic mechanism of the acupuncture-like TENS probably related to endogenous opioid component such as $\beta-endorphin$.

• 한국연소학회:학술대회논문집
• /
• 2001.11a
• /
• pp.169-178
• /
• 2001

Among the recent research ideas to reduce hydrocarbon emissions emitted from SI engines till light-off of catalyst since cold start are those exploiting non-thermal plasma technique and photo-catalyst that draws recent attention by virtue of its successful application to practical use to clean up the atmosphere using the feature of its relative independence on temperature. Based on the previous research results obtained with model exhaust gases using an experimental emissions reduction system that utilizes the non-thermal plasma and photo-catalyst technique, further investigation was conducted on a production N/A 1.5 liter DOHC engine during cold start to warm-up. For the effects of non-thermal plasma-photocatalyst combined reactor, 10% concentration reduction was achieved with the fuel component paraffins, and the large increase in non-fuel paraffinic components and acetylene concentrations were similar to those of base condition. However the absolute value was locally a bit higher than those of base condition since the products was made from the dissociation and decomposition of highly branched paraffins by plasma-photocatalyst reactor. Olefinic components were highly decomposed by about 75%, due to these excellent decompositions of olefins which have relatively high MIR values, and the SR value was 1.87 that is 30% reduction from that of base condition, then, the photochemical reactivity was lowered.