• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1468-1475
• /
• 2023

Enhancement of wear resistance of components used in fast reactors is necessary for long service life of the components. Plasma nitriding is a promising surface modification technology to impart high hardness and improved wear resistance of various steel components. This study discusses the characterization of chrome nitrided SS316L casing ring used in secondary sodium pump of fast breeder reactor and its stability under long term sodium exposure. Microstructural and hardness analysis showed that stress relieved component could be chrome nitrided successfully to a thickness of about 100 ㎛. Assessment of in-sodium performance of the chrome nitrided casing ring subjected to long term exposure up to 5000h at 550℃, showed retention of chrome nitrided layer with a case depth almost similar to that before sodium exposure. A slight decrease in the hardness was observed due to prolonged high temperature sodium exposure. Tribological studies indicate very low coefficient of friction indicating the retention of good wear resistance of the coating even after long term sodium exposure.

• Journal of Nutrition and Health
• /
• v.32 no.5
• /
• pp.552-560
• /
• 1999

In this study, we investigated the effects of lowering the fat and cholesterol in the diets of 26 Korean hypercholesteolemic men($\geq$240mg/dl). They consumed 2378kcal/day with 20.9% of the energy deriving from fat, and a cholesterol intake of 282mg(118mg/1000kcal). The experimental diet consisted of 2400kcal, the same as their usual diet, but the fat content was restricted to 15%, and the cholesterol level to below 100mg/1000kcal. The subjects kept to this diet for four weeks and were asked to maintain their usual life activities during the experimental period. The dietary intake and levels of plasma lipid, lipoprotein-cholesterol and apoprotein of the subjects were analyzed before, two weeks into, and after four weeks dietary intervention. After two of the dietary intervention, there were no significant changes of plasma total cholesterol or triglyceride levels but there was some changes of phospholipid level. However, after four weeks, the levels of plasma total cholesterol, triglyceride, and phospholipid had decreased significantly: 18.2%, 32.9%, and 11.9%, respectively. And the LDL-cholesterol and VLDL-cholesterol levels also showed a marked reduction of 18.1%, and 33.0% respectively without change of HDL-cholesterol level. There were no changes in the levels of Apo-A 1, Apo-B, or Lp(a). The changes of the plasma lipid levels were significantly associated with the changes in dietary fat intake but not the cholesterol intake. In conclusion, although the responses to the dietary intervention varied among the individual subjects, the lowering of dietary fat component from 21% to 15% of energy intake seems to be an effective way to reduce plasma cholesterol and triglyceride levels without decreasing HDL-cholesterol level. It was also found that the restriction of dietary cholesterol to below 100mg/1000kcal not seem to be effective for the hypercholesterolemic patient who already consuming below 300mg/day of cholesterol.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.145-149
• /
• 2016

The effect of process parameters such as plasma composition, ICP (Inductively Coupled Plasma) source power and rf chuck power on the etch characteristics of GaN epitaxy layer was studied. $Cl_2/Ar$ ICP discharges showed higher etch rates than $SF_6/Ar$ discharges because of the higher volatility of $GaCl_x$ etch products than $GaF_x$ compounds. As the Ar ratio increases in the $Cl_2/Ar$ ICP discharges, the etch anisotropy was enhanced due to the improved physical component of the etching. For both plasma chemistries, the GaN etch rate increased continuously as both the ICP source power and rf chuck power increased, and a maximum etch rate of 251.9 nm/min was obtained at $13Cl_2/2Ar$, 750W ICP power, 400W rf chuck power and 10 mTorr condition.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4412-4422
• /
• 2024

The CFETR multipurpose overload robot (CMOR) is a critical component of the fusion reactor remote handling system. To accurately calculate and visualize the structural deformation and stress characteristics of the CMOR motion process, this paper first establishes a CMOR kinematic model to analyze the unfolding and working process in the vacuum chamber. Then, the dynamic model of CMOR is established using the Lagrangian method, and the rigid-flexible coupling modeling of CMOR links and joints is achieved using the finite element method and the linear spring damping equivalent model. The co-simulation results of the CMOR rigid-flexible coupled model show that when the end load is 2000 kg, the extreme value of the end-effector position error is more than 0.12 m, and the maximum stress value is 1.85 × 10⁸ Pa. To utilize the stress-strain data of CMOR, this paper designs a CMOR morphology prediction control system based on Unity software. Implanting CMOR finite element analysis data into the Unity environment, researchers can monitor the stress strain generated by different motion trajectories of the CMOR robotic arm in the control system. It provides a platform for subsequent research on CMOR error compensation and extreme operation warnings.

• Journal of The Korean Astronomical Society
• /
• v.27 no.1
• /
• pp.45-53
• /
• 1994

We present the calculation of X -ray spectra produced through Compton scattering of soft X-rays by hot electrons in the spherical shell geometry, using fully relativistic Monte Carlo simulation. With this model, we show that the power-law component, which has been observed in the low luminosity state of low-mass X-ray binaries (LMXBs), is explained physically. From a spectral. analysis, we find that spectral hardness is mainly due to the relative contribution of scattered component. In addition, we see that Wi en spectral features appear when the plasma is optically thick, especially in the high energy range, $E{\gtrsim}100keV$. We suggest that after a number of scattering the escape probability approaches an asymptotic form depending on the geometry of the scattering medium rather than on the initial photon spectrum.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.317-321
• /
• 1997

The mineral components of the Gastrodia elata Blum were determined by inductively coupled plasma-atomic emission spectrophtometry. The mineral component contents of the Gastrodia elata Blum were greater in the order of Fe < Na < Mg < Ca < P < K. The antioxidative effects of the Gastrodia elata Blum extracts on refined perilla oil were investigated by the rancimat method, peroxide value and TBA value. The antioxidative effects of Gastrodia elata Blum added to the refined perilla oil was increased with dose-dependent fashion in concentration of Gastrodia elata Blum extracts. The peroxide value and TBA value for their antioxidation stability were also lower than that of control. Antioxidation stability was increased in a dose-dependent manner.

• BMB Reports
• /
• v.28 no.3
• /
• pp.275-280
• /
• 1995

The respiratory burst oxidase of neutrophils is a multicomponent enzyme, domant in resting cells, that catalyzes the reduction of oxygen to $O_{2}^{-}$ at the expense of NADPH. In the resting neutrophil, some of the components of the oxidase, including proteins p47 and p67, are in the cytosol, while the rest are in the plasma membrane. Recent evidence has suggested that at least some of the cytosolic oxidase components exist as a complex. The cytosolic complex with a molecular weight of ~240 kDa was found to bind to blue-agarose and 2',5'-ADP-agarose, which recognize nucleotide requiring enzymes. In order to identify the nucleotide binding component of the cytosolic complex we purified recombinant p47 and p67 fusion proteins using the pGEX system. Pure recombinant p47 was retained completely on 2',5'-ADP-agarose, whereas pure recombinant p67 did not bind to these affinity beads. On the basis of these results, we infer that p47 may contain the nucleotide binding site.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.33-33
• /
• 2003

A clear bipolar (negative/positive) signature in the Ey component was observed by the Cluster satellite in the magnetotail during a sudden impulse (si) on October 11, 2001 (day 284). During the interval of the negative perturbation in Ey, the magnetic field strength in Bx, a dominant magnetic field component, was nearly constant. However, the amplitude of Bx was strongly enhanced during the positive Ey perturbation. We suggest that the observed E and B field variations are due to outward/inward plasma motions, associated with expanded and then compressed magnetopause variations. We also observed quasi-periodic geomagnetic perturbations in the Pc5 band (∼1-6 mHz) at the low-latitude ground station Kakioka (L = 1.25) following the si event. They were highly correlated with the magnetic field perturbations at Cluster in the magnetotail (Xgse = ∼12 Re). We show that the source of these perturbations is the quasi-periodic solar wind pressure variations moving tailward.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.359-361
• /
• 2008

Glasses in the $SnO_2-(50-x)P_2O_5-xB_2O_3$ system were examined as potential replacement for the PbO glass frits with low firing temperature for component materials of a plasma display panel. The glasses were evaluated for their structural and the thermal expansion coefficient, glass transition and glass softening temperatures and Vickers hardness as a function of the $B_2O_3$ content.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.754-760
• /
• 2004

The miniaturization and integration are trend of modern blood analyses. Micro-Bio-Fluidics plays an important role in a micro blood analysis system. In this paper, analysis and design technology for blood analysis system is presented. Numerical simulations of a blood flow in micro separator and reservoir are conducted. As a result, we suggest on-chip micro separator, which performed plasma separation from whole blood in micro channels.