• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.351-357
• /
• 2004

We have investigated the intensity of Cu 510.6 nm emission line in see-through hollow cathode glow discharge (st-HCGD) for the development of medical Cu vapor laser. In order to acquire the stable plasma in st-HCGD cell at high current, several factors such as current, the length and the inner diameter of cathode tube, the shape of the tube, and the range of the sputtering range were tested. An optimum condition in our st-HCGD cell was obtained at 600 V, 700 mA, 2.3 Torr of Ar gas (100 SCCM), and 40 mm of tube with 4-11-4 mm type cathode design. Also, it was indirectly observed that temperature in the cell could reach more than $1,000{\circ}C$ since Cu cathode was melt at the current more than 700 mA (melting point of Cu, $1084{\circ}C$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.6
• /
• pp.921-929
• /
• 2020

Objective: The aim of the present study was to investigate the beneficial effects of dietary supplementation with oil palm frond (leaf) (OPF) with and without oil palm meal (OPM) on nutrient intake and digestibility, ruminal fermentation and growth performance in goats. Methods: Six female crossbred goats were fed for 28 days of 3 diet treatments; 100% para-grass (T1); 50% para-grass + 50% OPF (T2), and 30% para-grass + 50% OPF + 20% OPM (T3). Body weight, rectal temperature, respiratory rate, and urine volume, food intake, dry matter intake and water intake were measured daily. Nutrient digestibility was determined from five consecutive days of last week in each diet. Ruminal fluid, urine and blood were collected at the end for determination of rumen protozoa and volatile fatty acid contents, urinary allantoin excretion, blood cell count and chemistry profiles. Results: Goats fed T2 and T3 showed higher dry matter and nutrients intakes while protein digestibility was suppressed compared with those for T1. Crude fat digestibility declined in T2 but maintained after adding the OPM (T3). High fat intake by giving OPF and OPM corresponded to a higher ruminal acetate/propionate ratio (C2/C3) and serum cholesterol level. An increased urinary allantoin/creatinine ratio was found in T2 and T3 compared with T1, implying an increased number of ruminal microbes. Conclusion: Increased dry matter intake in T2 and T3 suggested that oil palm by-products are partly useful as a replacement for para-grass in goats. Replacement with the by-products increased plasma cholesterol level, which suggested that these products are a useful energy source. Changes in rumen parameters suggested an increased microbial number and activity suitable for acetate production. However, the limited digestibility of protein implies that addition of high protein feeds may be recommended to increase body weight gain of goats.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.928-934
• /
• 2002

Gallium doped Zinc Oxide(GZO) films were deposited by dc magnetron sputtering using a GZO ceramic target at various conditions such as substrate temperature (RT, 400), residual water pressure ($P_{H_2O}$; 1.61${\times}10^{-4}∼2.2{\times}10^{-3}$ Pa), introduction of $H_2$ gas (8.5%) and different magnetic field strengths(250, 1000G). GZO films deposited without substrate heating showed clear degradation in film crystallinity and electrical properties with increasing $P_{H_2O}$. The resistivity increased from 3.0${\times}10^{-3}$ to 3.1${\times}10^{-2}{\Omega}㎝$ and the grain size of the films decreased from 24 to 3 nm when PH2O was increased from 1.61${\times}10^{-4}$ to 2.2${\times}10^{-3}$ Pa. However, degradation in electrical properties with increasing $P_{H_2O}$ was not observed for the films deposited with introduction of 8.5% $H_2$. When magnetic field strength of the cathode increased from 250G to 1000G, crystallinity and electrical properties of GZO films improved remarkably about all the $P_{H_2O}$. This result could be attributed to the decrease in film damage caused by the decrease in plasma impedance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.12
• /
• pp.1767-1773
• /
• 2015

Effects of water-misting sprays with forced ventilation after transport during summer on meat quality, stress parameters, glycolytic potential and microstructures of muscle in broilers were investigated. A total of 105 mixed-sex Arbor Acres broilers were divided into three treatment groups: i) 45-min transport without rest (T group), ii) 45-min transport with 1-h rest (TR group), iii) 45-min transport with 15-min water-misting sprays with forced ventilation and 45-min rest (TWFR group). The results showed the TWFR group significantly increased (p<0.05) initial muscle pH ($pH_i$) and ultimate pH ($pH_u$) and significantly reduced $L^*$ (p<0.05), drip loss, cook loss, creatine kinase, lactate dehydrogenase activity, plasma glucose content, lactate and glycolytic potential when compared with other groups. Microstructure of the muscle from TWFR group broilers under light microscopy showed smaller intercellular spaces among muscle fibers and bundles compared with T group. In conclusion this study indicated water-misting sprays with forced ventilation after transport could relieve the stress caused by transport under high temperature, which was favorable for the broilers' welfare. Furthermore, water-misting sprays with forced ventilation after transport slowed down the postmortem glycolysis rate and inhibited the occurrence of PSE-like meat in broilers. Although rest after transport could also improve the meat quality, the effect was not as significant as water-misting sprays with forced ventilation after transport.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.378-387
• /
• 2017

To stabilize the supply of kimchi by extending the storage period of spring kimchi cabbage, this study manufactured kimchi from spring kimchi cabbage under varying storage conditions and periods, and analyzed their quality and sensory characteristics following the maturing period. Trimming loss was lowest in the group of plasma+reverse direction+predrying+HDPE film processing. The salting yield of spring kimchi cabbage stored for 12 weeks was lower than that of spring kimchi cabbage stored for 6 weeks, and the kimchi yield was low in the pre-treatment group of spring kimchi cabbage stored for 12 weeks. The firmness was slightly different according to the storage period from one month of maturation. From the perspective of pH and acidity, the maturation in the reverse direction+pre-drying+HDPE film processing group was slower than that in the normal group (<0.05). In the sensory evaluation, the preference was increased in the low temperature storage processing group as the maturation period was increased (<0.05).

• Journal of Trauma and Injury
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2020

Purpose: Despite recent developments in the management of trauma patients in South Korea, a standardized system and guideline for trauma treatment are absent. Methods: Five guidelines were assessed using the Appraisal of Guidelines for Research and Evaluation II instrument. Results: Restrictive volume replacement must be used for patients experiencing shock from trauma until hemostasis is achieved (1B). The target systolic pressure for fluid resuscitation should be 80-90 mmHg in hypovolemic shock patients (1C). For patients with head trauma, the target pressure for fluid resuscitation should be 100-110 mmHg (2C). Isotonic crystalloid fluid is recommended for initially treating traumatic hypovolemic shock patients (1A). Hypothermia should be prevented in patients with severe trauma, and if hypothermia occurs, the body temperature should be increased without delay (1B). Acidemia must be corrected with an appropriate means of treatment for hypovolemic trauma patients (1B). When a large amount of transfusion is required for trauma patients in hypovolemic shock, a massive transfusion protocol (MTP) should be used (1B). The decision to implement MTP should be made based on hemodynamic status and initial responses to fluid resuscitation, not only the patient's initial condition (1B). The ratio of plasma to red blood cell concentration should be at least 1:2 for trauma patients requiring massive transfusion (1B). When a trauma patient is in life-threatening hypovolemic shock, vasopressors can be administered in addition to fluids and blood products (1B). Early administration of tranexamic acid is recommended in trauma patients who are actively bleeding or at high risk of hemorrhage (1B). For hypovolemic patients with coagulopathy non-responsive to primary therapy, the use of fibrinogen concentrate, cryoprecipitate, or recombinant factor VIIa can be considered (2C). Conclusions: This research presents Korea's first clinical practice guideline for patients with traumatic shock. This guideline will be revised with updated research every 5 years.

• Journal of Technologic Dentistry
• /
• v.33 no.2
• /
• pp.121-128
• /
• 2011

Purpose: The purpose of this study is to investigate the level of each metal in non-precious metal alloys dental casting, still used even banned for use and trade by the law, for oral health. Methods: Two kinds of metal alloys were analyzed. One was Ticonium 100 for removable prosthesis and the other was Rexillium V for dental porcelain. Two samples of each metal alloy were made in 0.5g, 1.0g, and 1.5g. Total number of samples were 12. Two kinds of lactic acid Solution, pH7 and pH4.6, were injected into each samples. After injection, each samples had been for 21days ${\pm}$ 1 hour in the water tank of which temperature was $37^{\circ}C$. The level of metal was measured in each sample by inductively couplled plasma-atomic emission spectrometer. Results: In both metal alloys, metals, chrome, nickel, beryllium, and molybdenum, were founded. In Ticonium 1000, the highest level of nickel was 2.531ppm in 1.5g pH4.6 sample while the highest level of nickel was 4.062ppm in 1.5g pH4.6 sample of Rexillium V. In chemical composition of these methal alloys, chrome(14~17%) was much more than beryllium(1.95~1.99%) and molybdenum(5.0~9.0%) but berllium and molybdenum were founded more than chrome in samples. Therefore, chrome showed better anti-corrosion than other metal alloys. In both metal alloys, more metals were founded in higher pH level and more mass. Levels of chrome was significantly different in samples of both metal alloys in each pH level(p<0.05). Levels of nickels was significantly different in samples of both metal alloys in each pH level(p<0.05). Conclusion: For oral health, further studies are needed in nickel-chrome metal alloy and cobalt metal alloy of non-beryllium in addittion to beryllium metal alloy and also long-term studies needed in various period and other non-percious metal alloys for dental casting.

• Korean Journal of Veterinary Research
• /
• v.26 no.1
• /
• pp.187-194
• /
• 1986

The purpose of this study is to develop a new method which enables the goat ESR to be used as an effective clinical test. Blood samples were taken from 61 Korean native goats aged above one year old and the effect of tube inclinations, tube bores, tube lengths, environmental temperatures during tests and packed erythrocyte volumes (PCV) on the ESR were observed. The results were summarized as follows. 1. The ESR/hr using capillary hematocrit tube (Micro-Ht-tube) was gradually increased as the tube angle inclined from 90 (vertical) to 15 degrees and the best angle in view of both security and fast sedimentation rate was found to be an angle of 45 degrees. 2. The 45-degree angled ESR ($45^{\circ}$-ESR) increased as the diameter of tube bore decreased. 3. The tube length did not affect the $45^{\circ}$-ESR in percent. 4. The $45^{\circ}$-ESR increased with the increased environmental temperature during the ESR test. 5. The heparinized Micro-Ht tubes did not affect the $45^{\circ}$-ESR of EDTA-blood in healthy group but in anemic group. In the anemic group, the ESRs by the heparinized Micro-Ht-tubes were slightly higher than those by non-heparinized Micro-Ht-tubes. 6. By using the autologous plasma, PCV of the blood was adjusted to be 10, 20, 30, 40 and 50ml/100ml and $45^{\circ}$-ESRs were determined in the Micro-Ht-tubes. The $45^{\circ}$-ESRs increased as the values of PCV decreased. The regression of the $45^{\circ}ESR$ to PCV was curvilinear with the second degree polynomial, $Y=42.1838-1.7355X+0.0180X^2$(r=0.9997). 7. The $45^{\circ}$-ESR/hr, using non-heparinized Micro-Ht-tubes at $20^{\circ}C$, was determined in 35 healthy Korean native goats. The average PCV was $30.6{\pm}1.4ml/100ml$. The observed ESR values averaged $6.8{\pm}1.7%$ and the corrected ESR values to the standard PCV of 31ml/100ml averaged $6.5{\pm}1.2%$. From these results, the angled capillary tube method was found to be desirable ESR test of goat blood in which EDTA-blood is filled in nonheparinized Micro-Ht-tubes held at an angle of 45 degrees for an hour at $20^{\circ}C$.

• Korean Journal of Veterinary Research
• /
• v.43 no.1
• /
• pp.31-39
• /
• 2003

We have investigated the effect of extracellular $Mg^{2+}$ ($[Mg^2+]_o$) on action potential duration (APD) in guinea pig papillary muscles by using microelectrodes. Increasing $[Mg^2+]_o$ resulted in progressive negative inotropic effect, progressive ascending depolarization of membrane potential, and increase in intracellular $Mg^{2+}$ concentration. In addition, increase in $[Mg^2+]_o$ from 1.1 to 3, 6, 10, and 20 mM produced a reversible dose-dependent shortening of both APD at 30% ($APD_{30}$) and 90% repolarization ($APD_{90}$), especially showing a tendency towards more remarkable prominent shortening in $APD_{30}$ than $APD_{90}$. Cooling from 37 to 33 and $27^{\circ}C$ diminished the $[Mg^2+]_o$-induced APD shortening. Increase in extracellular $Ca^{2+}$ concentration from 1.8 to 3.6 and 5.4 mM caused a significant depressed effect on the increasing $[Mg^2+]_o$-induced APD shortening. Furthermore, increase in $[Mg^2+]_o$ from 1.1 to 10 and 20 mM produced a significant depressed effect on the APD shortening induced by extracellular $Ca^{2+}$. Pretreatment of verapamil and imipramine significantly attenuated the increasing $[Mg^2+]_o$-induced APD shortening in both $APD_{30}$ and $APD_{90}$, whereas the $[Mg^2+]_o$-induced APD shortening was not affected by strophanthidin, glibenclamide and tetrabutylammonium. These findings suggest that the effects of $[Mg^2+]_o$ on APD are probably due to a decrease in ionic transport across plasma membrane. In conclusion, the present study indicates that $[Mg^2+]_o$ exerts antiarrhythmic activities by antagonistic actions on intracellular $Ca^{2+}$.

• Journal of the Korean Ceramic Society
• /
• v.52 no.6
• /
• pp.410-416
• /
• 2015

Recently, a new $Y_2O_3$ coating deposited using the EB-PVD method has been developed for erosion resistant applications in fluorocarbon plasma environments. In this study, surface crack formation in the $Y_2O_3$ coating has been analyzed in terms of residual stress and elastic modulus. The coating, deposited on silicon substrate at temperatures higher than $600^{\circ}C$, showed itself to be sound, without surface cracks. When the residual stress of the coating was measured using the Stoney formula, it was found to be considerably lower than the value calculated using the elastic modulus and thermal expansion coefficient of bulk $Y_2O_3$. In addition, amorphous $SiO_2$ and crystalline $Al_2O_3$ coatings were similarly prepared and their residual stresses were compared to the calculated values. From nano-indentation measurement, the elastic modulus of the $Y_2O_3$ coating in the direction parallel to the coating surface was found to be lower than that in the normal direction. The lower modulus in the parallel direction was confirmed independently using the load-deflection curves of a micro-cantilever made of $Y_2O_3$ coating and from the average residual stress-temperature curve of the coated sample. The elastic modulus in these experiments was around 33 ~ 35 GPa, which is much lower than that of a sintered bulk sample. Thus, this low elastic modulus, which may come from the columnar feather-like structure of the coating, contributed to decreasing the average residual tensile stress. Finally, in terms of toughness and thermal cycling stability, the implications of the lowered elastic modulus are discussed.