• 연구논문집
• /
• 통권32호
• /
• pp.55-64
• /
• 2002

Performance demonstration with real flawed specimens has been strongly required for nondestructive evaluation of safety class components in nuclear power plant. Specimen has been designed to produce mechanical fatigue flaw with tension stress and fatigue flaw has been produced to control stress and cycle, for suitable roughness. Notch condition is considered for control of fracture mode. After seal welding for fracture surface, final welding was performed to complete flaw specimen with GTAW(Gas Tungsten Arc welding) and FCAW(Flux Cored Arc Welding). It was demonstrated flaw size of flawed specimen by radiographic. testing and ultrasonic testing.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.67-74
• /
• 2017

PURPOSES : The objective of this study is to ascertain the curing period of cementless cold central plant recycled asphalt base-layer, using mechanical analyses and specimen quality tests on the field. METHODS : Cold central plant recycled asphalt base-layer mixture was produced in the plant from reclaimed asphalt, natural aggregate, filler for the cold mix, and the modified emulsion AP using asphalt mix design and plant mix design. In order to examine the applicability of the curing period during the field test, the international standards for the possibility of core extraction and the degree of compaction and LFWD deflection were analyzed. Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on the specimens of asphalt mix and plant mix design. RESULTS : The plant production process and compaction method of cementless cold central plant recycled asphalt base-layer were established, and the applicability of the optical moisture content for producing the mixture was verified through the field test. In addition, it was determined that the core extraction method of the conventional international curing standard was insufficient to ensure performance, and the LFWD test demonstrated that the deflection converges after a two-day curing. However, the back-calculation analysis reveals that a three-day curing is satisfactory, resulting in a general level of performance of dense asphalt base-layer. Moreover, from the result of the specimen quality test of the asphalt mix design and plant mix design according to the curing period, it was determined that the qualities satisfied both domestic and international standards, after a two-day curing. However, it was determined that the strength and stiffness after three-day curing are higher than those after a two-day curing by approximately 3.5 % and 20 %, respectively. CONCLUSIONS:A three-day curing period is proposed for the cementless cold central plant recycled asphalt base-layer; this curing period can be demonstrated to retain the modulus of asphalt-base layer in the field and ensure stable quality characteristics.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.140-147
• /
• 2003

As the huge energy transfer systems like as nuclear power plant and steam power plant are operated for a long time at a high temperature, mechanical properties are changed and ductile-brittle transition temperature is raised by degradation. So it is required to estimate degradation in order to assess the safety, remaining life and further operation parameters. The sub-sized specimen test method using surveillance specimen was developed for evaluating the integrity of metallic components. In this study, we would like to present the evaluation technique of the ductile-brittle transition temperature by the sub-sized specimen test. The four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method. The tensile test and fracture toughness test were performed. The results of the fracture toughness tests using the sub-sized specimens were compared with the evaluation technique of the ductile-brittle transition temperature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.579-584
• /
• 2001

As the huge energy transfer systems like as nuclear power plant and steam power plant are operated for a long time, mechanical properties are changed and ductile-brittle transition temperature is raised by degradation. So it is required to estimate degradation in order to assess the safety, remaining life, and further operation parameters. The sub-sized specimen test method using surveillance specimen was developed for evaluating the integrity of metallic components. In this study, we would like to present the evaluation technique of the ductile-brittle transition temperature by the sub-sired specimen test. The four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method. The tensile test and fracture toughness test were performed. The results of the fracture toughness tests using the sub-sized specimens were compared with the evaluation technique of the ductile-brittle transition temperature.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.517-523
• /
• 2021

In this study, in the selection of materials for the elements of a small plant, those with high resistance to corrosion are selected and the material properties of coatings for corrosion prevention are evaluated. In addition, corrosion characteristics and material analysis were performed on the welded part, and the hardness characteristics of the welded part, heat-affected part, and the base metal were evaluated. In the case of the post-weld-heat-treated(PWHT) specimen, the corrosion resistance of STS 316 was lower than that of the specimen without the PWHT due to the formation of intergranular carbide. As a result of evaluating the distribution of the hardness of the weld before and after the PWHT, the hardness of the specimen after the PWHT increased by about 20 Hv. As a result of the corrosion test on the welded specimen, the weight loss tended to increase as the time increased. In the case of the PWHT specimen, the corrosion resistance tended to be significantly lower than that of the specimen without PWHT due to the formation of intergranular carbide.

• 한국균학회소식:학술대회논문집
• /
• 한국균학회 2009년도 추계학술대회 및 정기총회
• /
• pp.20-26
• /
• 2009

묘술료암색사포진균일중국대륙신기록종-부목의충낭포 ( Listeromyces insignis ), 기중의충낭포층 ( Listeromyces ) 재중국대륙수차보도(在中國大陸首次報道). 해종균채집자호남악녹산지표고지표층(該種菌采集自湖南岳麓山地表枯枝表層), 근거채집재료대기진행료상세적형태묘술화현미조상(根据采集材料對其進行了詳細的形態描述和顯微照相). 연구표존보존산동의업대학식물병리표본실(硏究標存保健山東依業大學植物病理標本室) ( HSAUP ).

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.17-22
• /
• 2015

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

• 한국지반공학회논문집
• /
• 제28권3호
• /
• pp.67-75
• /
• 2012

본 연구에서는 식물추출액을 이용하여 모래 입자 사이에 친환경적으로 탄산칼슘을 석출시켜 모래 고결을 유발하고자 하였다. 식물추출액에는 고결유발 미생물(예: $Sporosarcina$ $pasteurii$)과 같이 요소를 탄산이온과 암모늄이온으로 분해하는 우레아제 성분이 포함되어 있다. 분해된 탄산이온과 용액 속에 녹아 있는 칼슘이온이 결합하여 탄산칼슘을 석출시키는 원리를 이용하여 모래의 고결을 유도하였다. 깨끗한 낙동강모래에 식물추출액과 요소 그리고 칼슘원(염화칼슘 또는 수산화칼슘)을 혼합한 용액을 섞어서 비빈 다음 다짐방법으로 공시체를 제작하였다. 요소의 농도를 세 종류로 달리하였으며, 제작된 공시체를 실내($18^{\circ}C$)에서 3일 동안 양생시킨 다음 일축압축시험과 SEM 및 XRD분석을 실시하여 사질토의 고결 정도를 연구하였다. 칼슘원에 관계없이 요소의 농도가 높을수록 탄산칼슘이 더 많이 침전되어 일축압축강도는 식물추출액을 사용하지 않은 경우보다 최대 10배까지 증가하는 경향을 보였다. 염화칼슘을 사용한 공시체가 수산화칼슘을 사용한 경우보다 더 높은 강도를 나타내었다.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2597-2602
• /
• 2000

The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

• 식물분류학회지
• /
• 제48권2호
• /
• pp.123-128
• /
• 2018

Earlier taxonomic studies of Korean Scutellaria reported a new record of Scutellaria hastifolia L. in Korea based on three herbarium sheets. During a reexamination of these specimens, we found that the leaf characters of these specimens differ from those in the type specimen of S. hastifolia. Based on a literature survey and confirmation of the type specimen, the specimens identified as S. hastifolia thus far were a misidentification of S. barbata D. Don. S. hastifolia is clearly different from S. barbata by single conspicuous teeth on both sides of the leaf margins and larger leaves. In addition to the distribution sites of the three specimens used in the previous study, a distribution site of the S. barbata was newly found in the southern part of Korea. In this study, we report a new distribution of S. barbata in Korea, correct a previous report of S. hastifolia, describe the morphological characters of S. barbata, and suggest a taxonomic key to Korean Scutellaria including S. barbata.