• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.33-39
• /
• 2019

The goal of this study was to investigate how the characteristics of growth and yield are affected by various planting densities in wide-row drill seeding cultivation suitable for mechanized harvesting. Two cultivars ('Hwanggeum' and 'Leebackchal') of proso millet (Panicum miliaceum L.) were planted at varying planting densities [row spacing (20, 30, and 50 cm) and plant spacing (3, 5, 10, and 15 cm)]. The culm length was highest at the planting density of $50{\times}3cm$ and $50{\times}5cm$ for 'Hwanggeum' and $20{\times}3cm$ for 'Leebackchal'. The culm diameter became thinner as the planting density increased. The number of tillering and panicle length showed the same tendency to increase in quantity or length as planting density decreased and was highest at $50{\times}15cm$ when the planting density was lowest. The number of seeds per individual increased as planting density decreased. The thousand grain weight showed no significant differences among treatment plots. The greatest yield of 'Hwanggeum' was obtained at a planting density of $50{\times}3cm$ ($314.9kg{\cdot}10a^{-1}$) and that of 'Leebackchal' was obtained at $50{\times}3cm$ and $50{\times}5cm$ ($358-356kg{\cdot}10a^{-1}$).

• Research in Plant Disease
• /
• v.14 no.2
• /
• pp.107-111
• /
• 2008

For the eco-friendly control of fruit rot of fig, disease incidences according to the cultural practices at 51 fig orchards in south coast area of Korea were surveyed in 2002, and the effect of soil mulch and potassium phosphonate on fruit rot of fig was evaluated from 2002 to 2004. Diseased fruits of fig orchards of open field, rain shading, and vinyl house were 33.3%, 7.5%, and 0%, respectively. Diseased fruits were rated at 34.6%, 35.7%, and 27% as the tree spacing of $2m{\times}2m,\;2m{\times}3m,\;and\;3m{\times}4m$, respectively. Among the soil mulching materials, barley straw showed disease incidence of 1.8% and 3.5% of diseased fruits compared to 42.1% and 48% of no mulching in 2002 and 2003, respectively. Diseased fruits in dark paper film mulching were recorded at 4.8% and 12% in 2002 and 2003, respectively, which were lower than those in dark polyethylene film mulching at 11.2% and 26.2%. When potassium phosphonate(1,000 ppm) was sprayed 3 times with 10 days intervals from the beginning of disease occurrence, disease incidences were rated at 3.0% and 2.0% in 2003 and 2004, respectively, which were much lower than those of control at 45.9 % and 39.3%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.98-105
• /
• 2016

A fire risk assessment in rack-type warehouse is typically determined based on the following factors: 1. flammability and fire loads for storage of goods, packing materials, and pallet, 2. a ceiling height of warehouse indoor spaces, and 3. height, arrangement, and spacing for storage racks. For appropriately extinguishing and protecting the fire in warehouses, therefore, it is necessary to classify combustibles considering the previously mentioned factors and to develop design Standards for sprinkler system. As the first step to apply automatic sprinkler system to domestic warehouses, this study investigated characteristics for commodity distribution and warehouse configuration using 28 warehouses in five distribution complexes located in Gyeonggi-do, South Korea. In addition, this study analyzed Standards for commodity distribution adopted in USA, Europe, and Japan. Using the field survey analysis, this study was aimed to provide baseline data to prepare for Commodity Classification Standard for warehouses in South Korea.

• Journal of Mechanical Science and Technology
• /
• v.15 no.3
• /
• pp.291-299
• /
• 2001

Recently, severe wear on the shutdown rod cladding of Ulchin Nuclear Power Plant #1, #2 were observed by the Eddy Current Test(E.C.T.). In particular, the wear at the sixth card location was up to 75%. The test results indicated that the Flow Induced Vibration(F.I.V.) might be the cause of the fretting wear resulting from the contact between Rod Cluster Control Assemblies(RCCAs) and their spacing cards(guide plates) arranged in the guide tube. From reviewing RCCAs fretting wear repots and analyzing the general characteristics of F.I.V. mechanism in the reactor, geometric layout and flow conditions around the control rod, it is concluded that the turbulence excitation is the most probable vibration mechanism of RCCA. To identify the governing mechanism of RCCA vibration, an experiment was performed for a representative rod position in which the most serious fretting wear experienced among the six rod positions. The experimental rig was designed and set up to satisfy the governing nondimensional numbers which are Reynolds number and mass damping parameter. The vibration amplitude measurement by the non-contact laser displacement sensor showed good agreements in the frequency and the maximum wearing(vibration) location with Ulchin E.C.T. results and Framatome report, respectively. The sudden increase in the vibration amplitude was sensed around the 6th guide plate with mass flow rate variation. Comparing the similitude rod behaviour with the idealized response of a cylinder in flow induced vibration, it was found that he dominant mechanism of vibration was transferred from turbulence excitation to periodic shedding at the mass flow ate 90ι/min. Also the critical velocity of the vibration in RCCAs was determined and the vibration can be prevented by reducing the bypass flow rate below the critical velocity.

• Horticultural Science & Technology
• /
• v.18 no.6
• /
• pp.787-791
• /
• 2000

Lettuce seedlings used in this investigation of planting distance and labor-saving efficiency were first grown in 100-hole paper trays for 30 days. Seedling height for transplanting ranged from 3 cm to 6 cm and plants had 3 to 5 leaves. The beds prepared for transplanting were of the arched type and were 35-40 cm in width, 15-20 cm in bed height, and between-bed furrow width was 20 30 cm. Typical seedling planting depth with the transplanter was 4-5 cm, although depth was quite variable because of the irregularities of the ground. Total transplanting time with the transplanter varied from 2.6 to 2.7 hours per 10a, while it took 38.1 hours per 10a with conventional planting. It was critical that the condition of both the seedlings and the bed be adjusted to the transplanter before planting. Considering yield and inter-plant distance, optimal transplanter performance resulted with $60{\times}20cm$ or $60{\times}25cm$spacing, and the labor-saving efficiency using the transplanter was improved by over 93% of that of conventional planting by hand.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.2
• /
• pp.134-142
• /
• 2017

Crop production in rice paddy fields is of great importance because of declining rice consumption and the low self-sufficiency ratio for field crops in Korea. A controlled drainage system (CDS) is recognized as an effective means to adjust water table (WT) levels as needed and control soil water content to improve the soil environment for optimum crop growth. The present study evaluated the effects of a CDS on soil characteristics, including soil water distribution and soybean development in paddy fields. The CDS was installed with two drain spacing (3 m and 6 m) at the experimental paddy field at the National Institute of Crop Science, Miryang, Korea. It was managed with two WT levels (0.3 m and 0.6 m) during the growing season. Soil water content, electrical conductivity and plant available nitrogen content in the soil were significantly greater in the 0.3 m WT management plots than in the 0.6 m plot and the control. At the vegetative stage, chlorophyll content was significantly lower with higher WT control because of excess soil moisture, but it recovered after the flowering stage. Soybean yield increased with WT management and the 0.6 m WT treatment produced the greatest grain yield, $3.38ton\;ha^{-1}$, which was 50% greater than that of the control. The CDS directly influenced outflow through the drains, which significantly delayed nutrient loss. The results of this study indicated that WT management by CDS can influence soil characteristics and it is an important practice for high yielding soybean production in paddy fields, which should be considered the crop growth stages for stable crop production.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.1
• /
• pp.85-92
• /
• 2013

Many efforts will have to be made on securing the stable supply of the energy due to the worldwide trend of controlling the utilization fossil fuels inducing global climate change. Renewable portfolio standard enforced to power companies over 500 MW capacity from 2012. Tidal current energy is one of the most interesting renewable and clean energy resources that have been less exploited. Especially, Korea has worldwide outstanding tidal current energy resources and it is highly required to develop a tidal current energy conversion system(TECS) in coastal region. So, we examine a tidal in-stream energy using a numerical model and estimate a tidal current potential for commercialization of tidal current power plant in the sea of the Bunamgun-do. Available tidal energy resources is also analytically estimated using a tidal farm method and the annual energy production of an optimal TECS arrays will be calculated with taking into account interference of lateral and longitudinal spacing.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.4
• /
• pp.49-57
• /
• 2011

The objective of this study was to experimentally investigate the feasibility of SRI (system of rice intensification) in Korean rice farming. Eight experimental plots of $5{\times}15$ m in size were prepared on an existing rice field of loam soil. Spacing was $30{\times}15$ cm (conventional treatment: CT), $30{\times}30$ cm, $40{\times}40$ cm and $50{\times}50$ cm, respectively. CT were flooded and SRI plots irrigated intermittently 3 to 5 day interval during cultivation. Organic matter content and pH of the soil were $2.5{\pm}0.03$ % and $6.1{\times}0.2$, respectively, before the cultivation. The highest number of tillers and height of the plant were measured at $50{\times}50$ cm plots. The height and number of tillers and height in $50{\times}50$ cm plots were 10 cm and 1.5 times more than CT. Average irrigation supply to SRI and CT was 243.2 mm and 547.3 mm, respectively. It meant that the reduction of irrigation water in SRI plots over CT was estimated to 55.6 %. Therefore SRI was concluded to have a good enough possibility to be applied in South Korea because it was proven to be more effective in reduction of irrigation water and crop cultivation compare to the CT.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.263-273
• /
• 2020

With the change of the agricultural environment (increased rice production, decreased rice consumption, and rice production policies), converting paddy fields into upland fields is an increasing trend. In terms of conversion into upland fields, subsurface drainage is one of the most important factors for good field crop growth. This study evaluates the performance of a subsurface drainage culvert system in paddy fields and reclaimed lands. The obtained results are briefly summarized as follows: 1) After a comparative evaluation of several subsurface drainage culvert systems, including excavated subsurface drainage and non-excavated subsurface drainage types, type 3 (non-excavated, perforated drain pipe 50 mm, filter mat B50 cm, subsoiling 70 cm and culvert spacing 5 m) shows relatively high values among four types in terms of effectiveness (subsurface discharge capability) and economic efficiency (construction cost). 2) Type 3 has proven that it is suitable for design standards of discharge capacity through field tests performed in paddy fields (three sites: Gong-geom, Gae-san, Juk-san) and reclaimed lands (two sites: Gum-ho, Mi-am). 3) In the experiment of Sesamum indicum growth according to the existence of a drainage system, Sesamum indicum growth with a subsurface drainage culvert system had good value in terms of plant shoot and root length, shoot fresh and dry weight, and root fresh and dry weight).