• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.584-590
• /
• 1993

The constructed closed recycling system discussed in this technical report will be economically viable in future for the production of fish and vegetable in earth, space station and space colony, further, it will contribute a lot in the prevention of pollution in the world's ecological system. To make combined system, water management (Nitrification) is required, and it took 45 days to breed microorganism which facilitates this process. After this period , the recycle was confirmed to be working .Using derived equations, the expected nutrient characteristics of waste water were determined and it was found that the resulting nutrient balance was almost same as that in hydroponic solution when KOH was added to maintain pH level. Reverse osmosis (RO) system could solve the problem of the low nutrient concentration . It was found that plants grow well in fish waste water which was produced using RO system. RO system could combine fish and plant production through the advantageous use of separated high concentration water for plant and permeated water for fish in integrated combined system.

• BMB Reports
• /
• v.41 no.1
• /
• pp.79-85
• /
• 2008

The source of nitric oxide (NO) in plants is unclear and it has been reported NO can be produced by nitric oxide synthase (NOS) like enzymes and by nitrate reductase (NR). Here we used wild-type, Atnos1 mutant and nia1, nia2 NR-deficient mutant plants of Arabidopsis thaliana to investigate the potential source of NO production in response to Verticillium dahliae toxins (VD-toxins). The results revealed that NO production is much higher in wild-type and Atnos1 mutant than in nia1, nia2 NR-deficient mutants. The NR inhibitor had a significant effect on VD-toxins-induced NO production; whereas NOS inhibitor had a slight effect. NR activity was significantly implicated in NO production. The results indicated that as NO was induced in response to VD-toxins in Arabidopsis, the major source was the NR pathway. The production of NOS-system appeared to be secondary.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.493-498
• /
• 2014

The objective of this study was to make growth and yield models for common ice plant (Mesembryanthemum crystallinum L.) using expolinear functional equations in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-hours photoperiod were used, and the light intensity was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Nutrient film systems with three layers were used for plant growth. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Leaf area, shoot fresh and dry weights, light use efficiency of common ice plant as function of days after transplanting, accumulative temperature and accumulative radiation were analyzed. Leaf area, shoot fresh and dry weights per area were described using an expolinear equation. A linear relationship between shoot dry and fresh weights was observed. Light use efficiency of common ice plant was $3.3g{\cdot}MJ^{-1}$ at 30 days after transplanting. It is concluded that the expolinear growth model can be a useful tool for quantifying the growth and yield of common ice plant in a closed plant production system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11a
• /
• pp.1-30
• /
• 2000

The higher stage of development of plant factory is discussed, that involves technologies such as process control for the plant growth environment, mechanization for material handling, system control for production and computer applications. Further, the advantages of a plant factory include production stabilization, higher production efficiency, and better quality management of products through a shortened growing period, better conditions, lower labor requirements, and easier application of industrial concepts. Finally, to realize the ultimate plant factory using both solar and artificial light, the intelligent approach from control engineering, physiological ecology and artificial intelligence(AI) may be inevitable and introduced based on some works done by authors.

• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.762-769
• /
• 2022

Growth characters and ingredient contents of two-year-old bellflower (Platycodon grandiflorum) roots were investigated under both control and soil moisture treatment condition using soil moisture control system including soil sensing and automatic water supply chain in this study. Root diameter, fine root number, root length, fresh weight and dry weight of the plant were significantly influenced by the automatic water treatment, 20%, 30%, 40% and 50%, respectively. Ingredient contents of the two-year-old roots in bellflower plants were detected in the 20% and 50% of controlled soil moisture content. Contents of amino acids were decreased by the soil moisture treatment, meanwhile, contents of minerals were not showed significant decrease except for phosphorus content. Showing no difference in proline and tyrosine, fourteen of the amino acid contents were gradually decreased by the increased soil moisture contents, with significant decrease in serine, glycine, alanine, leucine, lysine and histidine at 20% treatment.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.8-17
• /
• 2014

The aims of this research were to evaluate effects of biomass co-firing to pulverized coal power plants and the variation of co-firing ratios on the plant efficiency related to power consumption of auxiliary system and flue gas characteristics such as production and component by process simulation based on the existing pulverized coal power plant. In this study, four kinds of biomass are selected as renewable fuel candidates for co-firing: wood pellet(WP), palm kernel shell(PKS), empty fruit bunch(EFB) and walnut shell(WS). Process simulation for various biomass fuels and co-firing ratios was performed using a commercial software. Gas side including combustion system and flue gas treatment system was considering with combination of water and steam side which contains turbines, condenser, feed water heaters and pumps. As a result, walnut shell might be the most suitable as co-firing fuel among four biomass since when 10% of walnut shell was co-fired with 90% of coal on thermal basis, flue gas production and power consumption of auxiliary systems were the smallest than those of other biomass co-firing while net plant efficiency was relatively higher than those of other biomass co-firing. However, with increasing walnut shell co-firing ratios, boiler efficiency and net plant efficiency were expected to decrease rather than coal combustion without biomass co-firing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.359-365
• /
• 2003

This paper describes the on-line readymixed concrete production system using CAN network, which is a leading industrial control network. The CAN network interface circuits for moisture sensor and load cell sensor we designed for CAN network of readymixed concrete production system, respectively, and also the method for networking 2-states devices such as limit switch and lamp is suggested. The operating status of a overall remicon production system is monitored, and also the system is controlled with host computer through the network. The CAN network interface method is applied to the real readymixed concrete production system to verify the performance of proposed method.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.3
• /
• pp.267-280
• /
• 2015

The European civil aviation industry, which had lower technical skills, capital strength and market scale than the U.S., adopted the production system of joint development and division labor between the nations of Europe. Each plant locations strengthened their specialization of the production branch in the past 40 years with a geographical accumulation of the specialized manufacturing facilities, suppliers, universities and laboratories by the logic of geographical proximity and learning effect. The cargo plane transportation system in the production of short- and medium-haul aircraft facilitated the geographical dispersion of manufacturing process and the logistical linkage among the various plant locations. But the production of long-haul large aircraft(A380) chosen the transportation system by the cargo ship because of the size and weight. Considering the transportation system by the cargo ship, the choice of Toulouse as a final assembly plant location was the irrational locational decision from a locational point of view. This locational choice is explained by the merging process of the European civil aviation industry, the logic of learning effect and geographical proximity, and the active attraction support policy.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.279-285
• /
• 2023

The demand for the fresh leaf of hooker chive, which is mainly used as functional roots and contains dietary sulfur or saponin, is increasing, but the leaves are only harvested 3-4 times per year under conventional field conditions. A plant factory system with different light qualities or intensities was applied for year-round production of the fresh leaves. Hooker chive (Allium hookeri) roots were hydroponically cultured under the plant factory with a mixture of blue plus red LEDs (Light-Emitting Diodes) and fluorescent lights for 50 weeks. Maximum leaf growth was attained with the 1.5 dS/m EC in the culture medium under the plant factory. The average leaf and shoot numbers of hooker chive grown hydroponically under a mixture of 200 µmol/m²/s LEDs increased by 147% and 140%, respectively compared to those under 100 µmol/m²/s LEDs at the 10th harvest. The leaf length of hooker chive grown under the LEDs treatment with the lowest light intensity significantly increased by 27% compared with the natural light treatment at the 10th harvest. However, there was no significant difference in leaf pigmentation between natural and 200 µmol/m²/s LEDs treatments. Plant factory with the mixture LEDs of blue and red lights can be applied for year-round production of hooker chive fresh leaves to ensure a stable supply of leafy vegetable throughout the year.

• Plant Resources
• /
• v.7 no.3
• /
• pp.233-237
• /
• 2004

This study was conducted to develop effective production system in greenhouse for leaves and stems of Angelica acutiloba by using connect pots in 2003 and 2004. Seed germination rate and plant biomass of Angelica acutiloba collected in 2004 were higher than those harvested in 2003. Germination rate of Angelica acutiloba seeds collected in 2003 was 10％, while germination rate of seeds collected in 2004 was above 90％. Especially, plant growth and yield of Angelica acutiloba grown in connect pots sized with 4 ${\times}$ 4 ${\times}$ 5cm(length ${\times}$ width ${\times}$ height) were the highest. These results indicate that leaf and stem production of Angelica acutiloba can be improved by using connect pots and optimizing seed collecting time in greenhouse.