• 제목/요약/키워드: plant operation

검색결과 2,272건 처리시간 0.026초

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

종간직접전자전달 전도체로서 Magnetite(Fe3O4)가 음폐수의 메탄생산에 미치는 영향 (Effects of Magnetite(Fe3O4) as Electrical Conductor of Direct Interspecies Electron Transfer on Methane Yield of Food Wastewater)

  • 이준형;김태봉;김창현;윤영만
    • 유기물자원화
    • /
    • 제31권1호
    • /
    • pp.15-26
    • /
    • 2023
  • 혐기소화에 의한 메탄생산은 유기물이 가수분해, 산생성 단계를 거쳐 아세트산생성균과 메탄생성균 간의 영양공생 (syntrophy)에 의해 일어난다. 본 연구에서는 종간 영양공생 기작인 종간직접전자전달 (DIET, Direct Interspecies Electron Transfer) 과정을 촉진시키기 위하여 전도체인 마그네타이트 (Fe3O4) 첨가가 음폐수의 메탄생산에 미치는 영향을 파악하고자 하였다. 이를 위해, 본 연구에서는 회분식 혐기반응기를 이용하여 마그네타이트 투입량에 따른 음폐수의 메탄퍼텐셜 (Bu)과 최대메탄생산속도 [Rm(t0)]를 분석하였다. 마그네타이트 무처리구의 메탄퍼텐셜은 0.496 Nm3/kg-VSadded이었으며, 21.06일에 38.24 mL/day의 최대메탄생산속도를 보였다. 마그네타이트 5, 10, 15, 20, 25, 30, 40, 70, 100mM 처리구의 메탄퍼텐셜은 각각 0.502, 0.498, 0.512, 0.510, 0.518, 0.523, 0.524, 0.540, 0.549 Nm3/kg-VSadded이었으며, 마그네타이트 투입량 증가에 따라 유의성 있는 메탄퍼텐셜의 증가 경향을 보였다. 최대메탄생산속도는 무처리구와 비교하여 마그네타이트 처리구에서 증가하였으며 15mM 처리구에서 36.95%까지 증가하였다. 또한, 마그네타이트 투입농도가 증가함에 따라 최대메탄생산속도에 도달하는 기간(t0)은 무처리 21.06일에서 마그네타이트 100mM 처리 14.67일로 크게 단축되었다. 따라서, 마그네타이트 투입에 따른 음폐수의 메탄퍼텐셜과 최대메탄생산속도가 크게 향상되었다.

X-밴드 레이더 산란계 자동 측정시스템 구축과 벼 생육 모니터링 (Construction of X-band automatic radar scatterometer measurement system and monitoring of rice growth)

  • 김이현;홍석영;이훈열
    • 한국토양비료학회지
    • /
    • 제43권3호
    • /
    • pp.374-383
    • /
    • 2010
  • 본 연구에서는 기상조건에 영향을 받지 않고 레이더산란 측정을 할 수 있는 X-band 안테나 기반 자동관측 시스템을 구축하였다. 이 시스템을 이용하여 벼 생육시기에 따른 편파별 후방산란계수 변화와 벼 생육인자 변화를 관측하고, 후방산란계수와 벼 생육인자와의 관계를 분석을 통해 최적조건의 후방산란계수를 이용한 벼 생육을 추정하였다. 벼 생육시기에 후방산란계수 변화를 관측해 본 결과 생육초기에는 VV-편파가 HH, HV/VH-편파 보다 후방산란계수가 높게 나타났고, 모든 편파별 후방산란계수가 벼 유수형성기 (7월 말경)까지 증가하다가 그 후 감소 한 후 9월 초순이후 다시 증가하는 dual-peak 현상을 뚜렷이 나타났다. 동시에 생육시기에 따른 생체중, 이삭 건물중, 엽면적지수, 초장 등 벼 생육인자들의 생육 변화를 관측해 보았는데 생체중, 엽면적지수, 초장은 6월 중순부터 7월 하순까지 편파별 후방산란계수와의 변화 경향이 비슷하게 나타났고, 이삭 건물중의 경우 특히 VV-편파 후방산란계수가 9월 초순에서 10월 초순까지 변화 경향이 동일하게 나타났다. 편파별 후방산란계수와 벼 생육인자와의 상관관계를 분석한 결과 엽면적지수, 생체중은 6월 중순 (DOY 168)부터 7월 하순 (DOY 209) 시기에 HH-편파 후방산란 계수와 상관관계가 높았고, 초장은 같은 시기에 VV-편파 후방산란계수와 관계가 높게 나타났다. 이삭 건물중의 경우 벼 출수기가 끝나고 결실기로 접어드는 9월 초순 (DOY 244) 부터 10월 초순 (DOY 276) 시기에 VV-편파 후방산란계수와 상관관계가 높게 나타났다. 이 결과를 바탕으로 벼 생육인자와 상관이 높게 나타난 편파별 후방산란계수를 이용하여 벼 생육을 추정하였다. 엽면적지수는 HH-편파 후방산란계수를 이용하여 2007년도 실측값과 2008년도 추정 경험 모형을 비교해본 결과 비교적 오차가 작았고 (RMSE=0.43), 상관관계가 높은 HH-편파 후방산란계수를 이용하여 2007년도 생체중 실측값과 생체중 추정 모형 (2008년도)을 비교해 본 결과 RMSE가 41.0 g $m^{-2}$ 으로 비교적 작은 오차를 보여 생체중 추정 모형의 유효성이 높다는 것이 증명되었다. 또한 초장의 경우 실측값 (2007년)과 초장 추정 모형 (2008년)을 비교 분석한 결과 오차 범위가 비교적 작게 나타났고 (RMSE=6.93 cm), VV-편파 후방산란계수를 이용해 얻은 이삭 건물중 추정 경험 모형 (2008년도)과 2007년도 이삭 건물중 실측값과의 관계를 통해 추정식을 검증한 결과 RMSE=0.35 g/m2 을 보여 이삭 건물중 추정모형의 유효성이 높다는 것이 증명되었다. 본 연구결과에서는 Kim et al. (2009)이 일정한 간격을 두고 수동조건으로 관측한 결과와 비교해서 벼 생육시기에 따른 편파별 후방산란계수 변화 경향이 뚜렷하게 나타났고, 이 후방산란계수를 이용하여 벼 생육인자와의 관계 및 추정 결과에서도 기존 결과보다 상관관계 및 생육추정 모형 유효성이 높게 나타났다. 본 연구 결과를 통해 X-band 산란계 자동측정 시스템을 이용하여 벼 생육을 예측 할 수 있음을 확인하였다.

환경영향평가와 환경위험의 평가 (Environmental Impact Assessment and Evaluation of Environmental Risks)

  • Niemeyer, Adelbert
    • 환경영향평가
    • /
    • 제4권3호
    • /
    • pp.41-48
    • /
    • 1995
  • In former times the protection of our environment didn't play an important role due to the fact that emissions and effluents were not considered as serious impacts. However, opinions and scientific measurements meanwhile confirmed that the impacts are more serious than expected. Thus measures to protect our earth has to be taken into consideration. A part of these measures in the Environmental Impact Assessment (EIA). One of the most important parts of the EIA is the collection of basic datas and the following evaluation. Experience out of the daily business of Gerling Consulting Group shows that the content of the EIA has to be revised and enlarged in certain fields. The historical development demonstrated that in areas in which the population and the industrial activities reached high concentration there is a high necessity to develop strict environmental laws and regulations. Maximum values of the concentration of hazardous materials were fixed concerning the emission into and water. Companies not following these regulations were punished. The total amount of environmental offences increased rapidly during the last decade, at least in Germany. During this development the public consciousness concerning environmental affairs increased as well in the industrialized countries. But it could clearly be seen that the development in the field of environmental protection went into the wrong direction. The technologies to protect the environment became more and more sophisticated and terms as: "state of the art" guided more and more to lower emissions, Filtertechnologies and wastewater treatment for example reached a high technical level-but all these sophisticated technologies has one and the same characteristic: they were end-of-the pipe solutions. A second effect was that this kind of environmental protection costs a lot of money. High investments are necessary to reduce the dust emission by another ppm! Could this be the correct way? In Germany the discussion started that the environmental laws reduce the attractivity to invest or to enlarge existing investments within the country. Other countries seem to be not so strict with controlling the environmental laws which means it's simply cheaper to produce in Portugal or Greece. Everybody however knows that this is not the correct way and does not solve the environmental problems. Meanwhile the general picture changes a little bit and we think it changes into the correct direction "End-of-the-pipe" solutions are still necessary but this word received a real negative touch and nobody wants to be brought into connection with this word received a real negative touch and nobody wants to be brought into connection with this word especially in connection with environmental management and safety. Modern actual environmental management starts in a different way. Thoughts about emissions start in the very beginning of the production, they start with the design of the product and modification of traditional modes of production. Basis of these ideas are detailed analyses of products and processes. Due to the above mentioned facts that the public environmental consciousness changed dramatically a continous environmental improvement of each single production plant has to be guarantied. This question is already an important question of the EIA. But it was never really checked in a wholistic approach. Environmental risks have to be taken into considerations during the execution of an EIA. This means that the environmental risks have to be reduced down to a capable risk-level. Environmental risks have to be considered within the phase of planning, during the operation of a plant and after shut down. The experience shows that most of the environmental relevant accidents were and caused by human fault. Even in highly protected plants the human risk-factor can not be excluded during evaluation of the risk-potential. Thus the approach of an EIA has to regard technical evaluations as well as organizational thoughts and the human factor. An environmental risk is a threat to the environment. An analysis of the risk concerning the organizational and human aspect however never was properly executed during an EIA. A possible solution could be to use an instrument as the actual EMAS (Environmental Management System) of the EC for more accurate evaluation of the impact to the environment during an EIA. Organizations or investors could demonstrate by an approved EMAS or even by showing their installment of EMAS that not only the technical level of the planned investment meets the requested standards but as well the actual or planned management is able to reduce the environmental impact down to a bearable level.

  • PDF

퇴비화촉진을 위한 쓰레기 수거체계의 확립 I. 음식물찌꺼기 원단위 발생량의 산정 (Establishment of Waste Collection and Transportation System for Composting I. Estimation of Unit Garbage Generation)

  • 신항식;황응주;강호;이시진;장원
    • 유기물자원화
    • /
    • 제3권2호
    • /
    • pp.25-36
    • /
    • 1995
  • 쓰레기는 여러가지 물질이 혼합되어 나오므로 퇴비화 시설의 성공적 운영을 위해서는 퇴비화에 적합한 쓰레기만을 분리해내는 것이 중요하다. 또한, 이를 위해서는 다양한 발생원에 산재하는 퇴비화 가능 쓰레기의 총량을 산출하는 것이 필요하며, 이를 바탕으로 쓰레기의 적정 수거체계는 물론이고 필요한 퇴비화시설의 규모 및 갯수도 산정이 가능하다. 본 연구에서는 주된 퇴비화 대상인 음식물찌꺼기의 발생량을 추정하였다. 원단위의 실측은 업소의 면적을 기준으로 하는가 또는 이용객의 수를 기준으로 하는가에 따라 상이한 결과를 보일 수 있는데 기존의 연구에서는 이것에 대한 기준이 제시되지 않은 문제가 있었다. 따라서 본 논문에서는 업소의 면적과 이용자수간의 상관관계를 분석하여 관계식을 유도하고, 이를 실제의 발생량 추산에 이용한 결과를 통해 원단위 측정시의 기준을 제시하였다. 그 결과 면적 기준과 이용자수 기준의 실측자료의 상대분산값은 각각 62.5와 52.8로 비슷하지만 이용자수 기준의 실측자료가 상대적으로 다소 변화가 적었다. 업소의 면적과 이용자수간의 상관성에서는 선형회귀분석결과 Y=0.244X+59.0인 관계가 구해졌으며, 이 때의 상관계수는 0.904이었다. 반면 Monod식 형태의 회귀분석에서는 Y=616.5X/(X+1215.4) 인 관계가 구해졌고 이때의 상관계수는 0.720으로 구해졌다. 선형회귀분석결과에서 얻어진 관계식을 이용하여 서울과 전국의 음식물찌꺼기 발생량을 산출한 결과는 2043.9톤/일, 9014.0톤/일과 같았고, 면적기준의 실측 원단위자료를 모든 면적의 업소에 대해 동일하게 적용했을 때는 821.3톤/일과 3821.0톤/일로 상대적으로 적은 수치를 보였다. 또한 1994년의 퇴비화 의무대상업소의 발생량은 집단급식소 9.3톤/일, 식품접객업소 3.3톤/일로 산출되었다. 결론적으로 음식물찌꺼기의 발생량을 산출하기 위한 원단위 발생량의 실사는 실측지점을 줄이면서 실측지의 대표성을 확보할 수 있는 이용객 기준의 측정방법이 바람직하며, 이는 특히 업소의 면적이 통계자료로 되어 있는 식품접객업소에서 유효하리라 판단되었다.

  • PDF

모의 비방사성폐기물의 유리화시 발생 분진의 재순환처리장치 및 배관 내 침적분진에 의한 막힘 방지용 제진장치의 개발 (Development of Dust Recycling System and Dust Cleaner in Pipe during Vitrification of Simulated Non-Radioactive Waste)

  • 최종서;유영환;박승철;최석모;황태원;신상운
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2005년도 춘계 학술대회
    • /
    • pp.110-120
    • /
    • 2005
  • ${\cdot}$저준위 고체폐기물의 유리고화처리 적용연구를 위하여, 현대모비스는 원자력환경기술원 및 프랑스 SGN사와 공동으로 99년 10월에 유리화 실증설비를 건설한 바 있다. 실증설비를 활용하여 모의핵종(Co, Cs)을 포함한 비방사성 이온교환수지, 잡고체 등에 대한 70여 회 이상의 실증시험 수행을 통하여, 대상폐기물을 안전하고 효과적으로 처리할 수 있음을 확인하였다. 그러나 처리공정 중 고온세라믹필터계통(High Temperature Filter : HTF)에서 발생하는 분진의 처리가 문제점으로 도출되었다. 또한 저온용융로(Cold Crucible Melter : CCM)와 HTF를 연결하는 냉각파이프는 장기간 운전시 CCM으로부터 발생한 분진이 침적되어 배관막힘의 우려가 있다. 이와 관련, 기 개발한 유리화공정에 추가하여 HTF에서 발생한 분진을 재순환하는 장치와 냉각파이프 내 침적분진을 제거하는 장치를 개발하였다. 유리화공정 중 HTF에서 발생하는 분진의 처리는 유리화설비의 감용비, 처분비용 및 유리용탕의 조절 측면에서 특히 중요하다. 분진재순환장치(Dust Recycling System : DRS)의 개념은, HTF 하단부에서 발생분진을 수거, 물과 섞어 슬러리 형태로 제조, 이송하여 CCM 내로 다시 투입함으로써 분진을 처리할 수 있도록 하였다. DRS의 주 기능은 분진 내의 모의핵종 및 주요 유리성분을 다시 CCM으로 재순환 처리하는 것이며, 이에 따라 유리용탕의 성분을 일정하게 유지하고 또한 유리배출을 용이하게 하는 데 기여한다. 또한 시멘트 고화설비 등과 같은 별도의 분진처리설비를 고려할 필요가 없다. 제진장치는 주기적으로 운전 중 가동할 경우, 냉각파이프 내의 분진침적에 의한 막힘 방지와 함께 배관 내 침적된 분진을 CCM 내로 다시 처리하는 효과를 기대할 수 있다. 유리화실증시험을 통하여 DRS와 제진장치에 대한 전체적인 성능평가를 성공적으로 수행하였으며, 운전결과 및 경험은 향후 상용설비를 위한 기본자료로 활용할 것이다.

  • PDF

운영 체제와 컴파일러에 따른 Geospatial Data Abstraction Library의 Hierarchical Data Format 형식 원격 탐사 자료 추출 속도 비교 (Comparison of the wall clock time for extracting remote sensing data in Hierarchical Data Format using Geospatial Data Abstraction Library by operating system and compiler)

  • 유병현;김광수;이지혜
    • 한국농림기상학회지
    • /
    • 제21권1호
    • /
    • pp.65-73
    • /
    • 2019
  • 지역이나 전구 규모의 농업 생태계를 감시하기 위해 HDF 형식으로 제공되는 MODIS 원격 탐사자료가 사용되어 왔다. 대개의 경우, 다량의 영상자료들이 처리되어야 하기 때문에, 이들 자료의 처리 성능을 향상시키는 것이 유리하다. 본 연구는 HDF 파일을 처리할 수 있는 GDAL과 같은 라이브러리가 운영 체제나 배포 방식 등에 따른 처리속도의 차이를 확인하여 원격 탐사 자료 처리 시스템 구축을 지원하고자 하였다. 이를 위해, GDAL이 시스템에 설치되는 주요 조건들에 따라 MODIS 영상자료 처리 시간을 측정하고 비교하였다. 운영 체제(Ubuntu 및 openSUSE), 컴파일러(GNU 및 Intel), 설치 옵션 및 바이너리 패키지 조건을 조합하여 GDAL성능 비교가 이루어졌다. 각 조건에 따라 설치된 GDAL을 사용하여 MODIS 영상 중 대기측정 자료(MOD07)의 2차원 변수와 3차원 변수에 해당하는 총 10 종의 자료를 추출하였다. 자료처리에 소요된 구동 시간은 각 변수 값을 시스템 메모리에 저장하는 작업이 끝난 직후 측정되었다. 가장 좋은 성능을 보인 설치 조건은 Ubuntu에서 Intel Compiler를 사용하여 컴파일 된 GDAL을 사용하는 것이었다. OpenSUSE에서는 GNU와 Intel 컴파일러가 각각 2차원 자료와 3차원 자료를 처리하기 위한 작업에 효과적인 것으로 나타났다. 한편 "--with-hdf4=no" 옵션으로 컴파일 된 GDAL과 RPM package manager 버전의 GDAL의 경우, 다른 조건에 비해 상당히 낮은 성능을 보였다. 이러한 결과는 운영 체제나 컴파일러, 설치 옵션 등을 조정하여 원격 탐사자료 처리 도구의 속도를 개선할 수 있다는 것을 암시하였다. 특히, 원격 탐사 자료의 경우 다양한 형식으로 배포되므로, 이를 처리하는 라이브러리들이 최고의 성능을 발휘할 수 있는 조건을 탐색하고 이러한 결과의 공유가 후속연구에서 진행되어야 할 것으로 보인다.

참외 시설 재배 시 고온에서의 환기 처리에 의한 상대습도 상승과 흰가루병, 담배가루이, 응애 방제 및 개화 억제 (Ventilation at Supra-Optimal Temperature Leading High Relative Humidity Controls Powdery Mildew, Silverleaf Whitefly, Mite and Inhibits the Flowering of Korean Melon in a Greenhouse Cultivation)

  • 서태철;김진현;김승유;조명환;최만권;류희룡;신현호;이충근
    • 생물환경조절학회지
    • /
    • 제31권1호
    • /
    • pp.43-51
    • /
    • 2022
  • 본 연구는 참외 재배 지에서 흰가루병, 담배가루이 및 두점박이응애가 동시에 발생하였을 때 45, 40, 35℃(대조구)의 온도에서 측창으로 환기 처리 시, 온실 내 온·습도의 변화, 병충해 발생과 잎말림, 그리고 개화조절에 미치는 효과를 검토하였다. 3월 3일 '히든파워' 대목에 접붙여진 '알찬꿀' 참외를 40cm 간격으로 격리상에 심었고, 위에 언급한 병해충이 모든 처리구에서 발생한 6월 18일부터 7월 13일까지 처리하였다. 온실의 온도는 맑은 날에는 설정 온도 지점까지 증가되었고, 45℃ 환기 처리에서 고온 고습이 약 9시간 동안 유지되었다. 주간 최고 기온과 최저 상대습도 차이는 45℃ 환기 처리에서 가장 높았다. 환기 처리 11일 후에는 흰가루병과 두점박이응애 피해가 45℃ 환기 처리에서 거의 회복되었지만 40℃와 35℃에서는 그렇지 않았다. 처리 14일 후, 담배가루이와 두점박이 응애 밀도는 45℃에서 유의하게 감소하였으나 흰가루병 증상은 유의하게 감소하지는 않았다. 잎말림은 고온에서 유발되었으나 45℃에서도 심하지 않았다. 처리 26일 후, 새로 나온 줄기의 15 마디의 개화수를 조사한 결과, 45℃에서 암꽃이 전혀 나오지 않았고 수꽃은 1.2개로 나타났다. 이상의 결과는, 고온기에 45℃의 고온에서 2-3주간 환기 처리는 온실 내부의 고온 고습을 유도하여 흰가루병, 담배가루이, 두점박이응애를 통제하고, 개화를 억제하여 참외의 영양 생장을 회복할 수 있는 방법으로 사료되었다.

인류사회 발전 지혜로서의 서비스철학 (Service Philosophy as Wisdom for Human Society Development)

  • 김현수
    • 서비스연구
    • /
    • 제12권4호
    • /
    • pp.1-18
    • /
    • 2022
  • 본 연구는 서비스철학이 서비스시대 인류사회의 발전원리임을 입증하기 위해 수행되었다. 상호존중의 식물적 생태계가 서비스시대 인류사회 운영원리가 되어야함을 입증하려고 시도하였다. 고대부터 현대에 이르기까지 통시대적으로 서비스철학이 인류사회 발전 지혜임을 보여주려고 하였으며, 동양과 서양 등 모든 지구공간에서 서비스철학이 인류사회 발전 지혜였음을 입증하려고 시도하였다. 또한 지구상의 모든 공간과 인간의 모든 시간 위에서 명멸한 많은 국가와 개인들의 발전 지혜에도 서비스철학이 그 중심에 있었음을 입증하려고 시도하였다. 한편 서비스철학에 위배되는 운영을 한 많은 국가와 개인, 그리고 시간과 공간에서는 발전이 더디거나 쇠퇴가 빨랐음을 입증하려고 시도하였다. 국가들의 차이는 하드웨어가 아닌 소프트웨어에 있었음을 본 연구는 보여주었다. 더 구체적으로 정신과 문화 등 소프트웨어적인것의 중심에 서비스철학이 내재되어 있었던 국가들은 인류사회에 큰 기여를 한 것으로 분석되었다. 그리스 로마와 베네치아공화국, 네덜란드공화국, 곧이어 미국과 현대 대한민국 등의 사례가 이를 입증하고 있고, 소련 등이 이를 반증하고 있다고 볼 수 있다. 전자는 국가 운영 소프트웨어가 강한 사회였고, 후자는 하드웨어가 강한 사회였다고 할 수 있다. 시민들이 자율적으로 구성하고 운영해간 국가와 상층부 주도 운영 국가의 경우는 차이가 크다. 상층부 주도는 서비스철학에 기반하지 못하고 있기 때문에 축적되는 소프트웨어적 힘이 약해서 인류사회에 지혜 축적이 약했다고 할 수 있다. 따라서 그동안의 인류사회가 이기심이 주도하는 자기중심적 동물적 생태계의 사회였다면, 지금부터의 서비스시대 인류사회는 상호존중과 자기중심이 공존하는 식물적 생태계의 사회로 변화되어야 지속적인 발전이 가능하다고 할 수 있다. 과거 인류사회에서 서비스철학이 중심이 된 사회가 더 번영하고 더 큰 유산을 인류에게 남겼듯이, 앞으로의 서비스시대 인류사회는 서비스철학이 중심이 되는 식물적 생태계의 인류사회가 되어야 함을 제안하였다. 자기 중심 소아와 공동체 중심 대아가 변증법적인 과정을 통해 팽팽한 균형을 이루는 서비스철학 기반 사회가 인류사회의 발전 지혜임을 제시하였다. 향후 이에 관련되는 심층적인 추가 연구들이 필요하다.

저온영역에서 석탄의 탈휘발 및 자연발화 특성 연구 (Characteristics of Coal Devolatilization and Spontaneous Combustion at Low Temperatures)

  • 윤성민;이석형;안태휘;서명원;이상원;김대성;문태영;박성진;윤상준;문지홍;이재구;주종훈;라호원
    • 청정기술
    • /
    • 제29권4호
    • /
    • pp.288-296
    • /
    • 2023
  • 세계적으로 석탄은 다른 에너지원에 비해 매장량이 풍부하여 다양한 에너지원으로 사용되고 있다. 기존 석탄 이용 방식에서 발생하는 환경적인 문제를 해결하기 위해 청정 석탄 활용 기술 개발이 이루어지고 있으며 대표적인 기술로 IGCC발전 기술이 있다. IGCC 발전에서 사용되는 석탄은 CMD 공정에서 열풍을 동시에 공급하여 건조, 분쇄가 이루어지고 있으나, 공급되는 열풍의 온도가 너무 높을 경우, 탈휘발, 자연발화 현상이 발생하게 되고 이로 인한 CMD 공정의 안정적인 운전을 저하시킨다. 본 연구에서는 유연탄 9종을 이용하여 탈휘발, 자연발화 개시온도를 측정하고 석탄 특성분석결과와 함께 상관관계를 알아보고자 하였다. 탈휘발 현상의 경우 350 ~ 400 ℃ 사이에서 6종 석탄의 탈휘발이 확인되었고 400 ℃ 이상의 온도에서 3종의 석탄 탈휘발을 확인하였다. 자연발화의 경우 100 ℃ 이하에서 1종의 석탄, 100 ~ 150 ℃ 사이에서 6종의 석탄, 150 ℃ 이상에서 2종 석탄의 자연발화를 확인하였다. 측정한 개시온도를 석탄 분석 결과 중 Oxygen, Moisture, Fe2O3, CaO, H/C Ratio, O/C Ratio와 비교하여 상관관계를 확인하였다. 회귀분석으로 각 개시온도의 회귀계수와 결정계수를 계산하였으며, FC/VM 데이터의 52.44%가 탈휘발 개시온도에 대해, Fe2O3 데이터의 59.10%가 자연발화 개시온도에 대해 영향을 주는 것에 대한 유의한 결과를 확인 하였다.