• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.133-137
• /
• 2011

Winterkill can be defined as any injury including freeze stress kill, winter desiccation, and low temperature disease to turfgrass plants that occurs during the winter period. The major damages from winterkill were low temperature kill, crown hydration, and winter desiccation. Low temperature kill is caused by air and soil temperature. Soil temperature affect more severe to turfgrass than air temperature because low soil temperature cause fetal damage to turfgrass crown. Crown hydration is a form of winter injury in which intercellular water within the plant freezes and causes physical injury to the cell membrane and wall. This is eventually resulted in dehydration of cell. Winter desiccation is the death of leaves or whole plants due to drought during the winter period. To reduce winterkill damage, cultivar selection is very important. If changing cultivar is not allowed, cold temperature hardiness needs to be increased by providing nutrients especially phosphorus and potassium in the late fall. Turf cover is effective way to reduce winterkill damage. Remaining snow is positive process to reduce winterkill damage by insulating soil temperature. The previous researches reported many materials as turf cover such as straw, polypropylene, polyester, and wood mat. Aeration and topdressing is one of the process against winterkill. Both methods are mainly conducted to reduce thickness of thatch layer. In recent, relatively new materials called black or winter topdressing sand are used to protect soil temperature from low air temperature and thaw ice crystal that may remain in soil.

• Journal of Microbiology
• /
• v.45 no.5
• /
• pp.460-465
• /
• 2007

This study was carried out in order to investigate the potential of using plant oils derived from Leptospermum petersonii Bailey and Syzygium aromaticum L. Merr. Et Perry as natural antifungal agents. The antifungal effects of essential oils at concentrations of 0.05, 0.1, 0.15, and 0.2 mg/ml on the dermatophytes Microsporum canis (KCTC 6591), Trichophyton mentagrophytes (KCTC 6077), Trichophyton rubrum (KCCM 60443), Epidermophyton floccosum (KCCM 11667), and Microsporum gypseum were evaluated using the agar diffusion method. The major constituents of the active fraction against the dermatophytes were identified by gas chromatography-mass spectrometry and high-performance liquid chromatography analysis. The antifungal activities of S. aromaticum oil (clove oil) against the dermatophytes tested were highest at a concentration of 0.2mg/ml, with an effectiveness of more than 60%. Hyphal growth was completely inhibited in T. mentagrophytes, T. rubrum, and M. gypseum by treatment with clove oil at a concentration of 0.2 mg/ml. Eugenol was the most effective antifungal constituent of clove oil against the dermatophytes T. mentagrophytes and M. canis. Morphological changes in the hyphae of T. mentagrophytes, such as damage to the cell wall and cell membrane and the expansion of the endoplasmic reticulum, after treatment with 0.11 mg/ml eugenol were observed by transmission electron microscopy (TEM). At a concentration of 0.2 mg/ml, L. petersonii oil (LPO) was more than 90% effective against all of the dermatophytes tested, with the exception of T. rubrum. Geranial was determined to be the most active antifungal constituent of L. petersonii oil. Taken together, the results of this study demonstrate that clove and tea tree oils exhibited significant antifungal activities against the dermatophytes tested in this study.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.611-618
• /
• 2001

The ethanol extract of Dryopteris crassirhizoma Nakai showed strong growth inhibition against 5 strains of Listeria monocytogenes at the concentrations of $100{\sim}500$ ppm and the minimum inhibitory concentration of n-hexane fraction was under 50 ppm. The D8-2-5 fraction isolated from n-hexane fraction of Dryopteris crassirhizoma Nakai showed a strong bactericidal activity on 5 strains of L. monocytogenes at 20 ppm level in tryptic soy broth medium. At the level, the viable count was reduced $4{\sim}6$ log cycle compared to initial cell number. Observation by the measurement of adenosine triphosphate (ATP) contents and transmission electron microscope showed that disruptions of the cell wall and elution of intracellular ATP are assumed to be due to the bactericidal activity. In addition, the n-hexane fraction of Dryopteris crassirhizoma Nakai showed the strong growth inhibitions at 50 ppm on Vibrio parahaemolyticus and Bacillus cereus, and at 25 ppm on Staphylococcus aureus.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.345-355
• /
• 1993

Anatomical study of the secondary xylem in Araliaceous plants, induding 7 genera and 11 species grown in Korea, was carried out to elucidate the relationship among genera in the family. Wood of Hedera has difbse porous and shows ulmiform pattern of angular vessels, simple perforation plate, and alternate pitting. In addition, its ray is homogeneous type II with only procumbent ray cell. Ring porous wood of Dendropanax shows ulmiform of angular vessels, simple perforation plate, alternate pitting, and heterogeneous type II ray, which has sometimes horizontal secretory cavity. Fatsia has diffuse porous wood, which shows ulmiform of angular vessels, scalariform perforation plate (3-9 bars), scalariform pitting, spiral thickening in the lateral wall of vessel, and heterogeneous type II ray with sheath cells. Kalopanax has ring porous wood, which shows ulmiform of circular vessels, simple perforation plate and alternate pitting, and heterogeneous type II ray. While K pictum appears tylose with septum, K pictum var. maximowczii appears tylose without septum. Echinopanax shows ring porous wood, ulmiform of angular vessels, simple perforation plate, scalariform pitting, and tylose with septum. And the ray of Echinopanax is paedomorphic type I composed of only upright cells. Acanthopanax genus is composed of diffuse porous wood, ulmiform of angular vessels, simple perforation plate and alternate pitting. In this genus, A. sessiliflorus has heterogeneous type II ray, apotracheal axial parenchyma and tylose with septum. A. senticosus appears paedomorphic type I with only upright cells, and tylose with septum. A. koreanum and A. sieboldianum have heterogeneous type II ray but have not tylose. Aralia is composed of ring porous wood, ulmiform of circular vessels, simple perforation plate, alternate pitting, heterogeneous type II ray, and tylose contained both septum and reticulate. On the basis of arrangement, shape, length and diameter of vessel element, the angle of end wall to vessel axis, and ray type, the line of specialization in these genera is as follow: from Fatsia, the most primitive, to the most highly specialized Aralia, throughout Hedera, Acanthopanax, Echinopanax, Dendropanax, and Kalopanax by turns. turns.

• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.12-23
• /
• 2009

To verify hybridity of Asplenium castaneo-viride, external morphology, spore morphology, anatomy and chromosomes of the species and of the two presumed parental species, A. incisum and A. ruprechtii, were examined. A. castaneo-viride usually had 1-pinnately divided frond. However, some individuals had almost simple fronds with pinnatisect basal parts similar to A. ruprechtii, while others had fronds similar to A. incisum in having oblanceolate blades and basal pinnae with triangular, 2-3 lobed apices. On the surface of the spores, sculpturing consisted of folds that were usually prominent; forming long wings, and irregular or incomplete reticulation. However, reticulation patterns varied among species. A. castaneo-viride showed a wide range of variation from sparse to dense patterns, whereas A. incisum showed only from sparse to intermediate patterns. A. ruprechtii showed from intermediate to dense patterns. The spore size of A. castaneo-viride was $54.63{\mu}m$, larger than other two species ($47.81{\mu}m$ in A. incisum and $44.22{\mu}m$ in A. ruprechtii). The level of undulation of epidermal cell wall was also different. A. incisum had the most shallowly undulated wall, and A. castaneo-viride had a pattern intermediate between the two presumed parental species. This same patterns was recognized in the density of stomata. The density of $45.91/mm^2$ in A. castaneo-viride was intermediate between the two presumed parental species ($67.00/mm^2$ in A. incisum, and $37.86/mm^2$ in A. ruprechtii). Chromosome number was constant (2x =2n = 72) as in A. incisum and A. ruprechtii. However, A. castaneo-viride showed a different ploidy level. The populations of Mt. Mai (Jeonbuk province) and Mt. Duryun (Jeonnam province) were diploid (2n = 72) which is a new record for this taxon, whereas the population of Mt. Buram (Seoul) was tetraploid (2n = 144). Conclusively, A. castaneo-viride was revealed to be a hybrid of A. ruprechtii and A. incisum based on evidence involving leaves, spores, epidermal cells, stomata and chromosome number.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.6-13
• /
• 1979

In order to substract the time and cost of propagation for inducing the haploid plants per each species. 500 anthers of late uninucleate microspore on early binucleate microspore stage of Robinia pseudoacacia (Fuel tree) Punius granatum (Ornamental tree). Aleurites fordii (Faty tree) and Styrax japonica (Silvicultural tree) were cultured on the modified Murashige and Skoog's medium supplemented with Kinetin, 2.4-D and NAA as growth regulators. And I observed the samples of cultured anthers under the microscope which were made by Microtoming method and Paraffin method. The results were summarized as follows: 1) Among 500 cultured anthers per each species, anther numbers inducing the diploid callus were as follow: Styrax japonica 20 (4% for the species total); Aleurites fordii 10 (2% for the species, total) and Punica granatum 45 (9% for the species total) were showed. 2) 2n Callus were induced from anther wall. but haploid callus were induced from anther locule. 3) Haploid callus were induced only in 25 anthers (5% for the species total) of Robinia pseudoacacia. 4) These haploid callus were not originated from body cell of anther wall tissue, but from reduced microspores, 5) Since already reported many herbaceous haploid plants were induced from the callus which were originated from reduced microspores, I conclude that the anther of woody plant which induced the haploid callus also will be cultured haploid plant.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Korean Journal of Plant Taxonomy
• /
• v.46 no.2
• /
• pp.199-212
• /
• 2016

A comparative study of leaf epidermal microstructures in the tribe Sorbarieae (Adenostoma: 3 spp., Chamaebatiaria: 1 sp., Sorbaria: 11 spp., Spiraeanthus: 1 sp.) including related genera Gillenia (2 spp.) and Lyonothamnus (2 spp.) was carried out using scanning electron microscopy (SEM) in order to evaluate their significance in taxonomy. The leaves of Adenostoma, Chamaebatiaria, and Spiraeanthus were amphistomatic, whereas Gillenia, Lyonothamnus, and Sorbaria were hypostomatic. The size range of the guard cells is $7.84-48.7{\times}5.86-38.6{\mu}m$; the smallest one was found in Sorbaria tomentosa var. tomentosa ($7.84-11.8{\times}6.84-10.5{\mu}m$), while the largest measured example was Adenostoma fasciculatum var. obtusifolium ($30.3-48.7{\times}18.8-38.6{\mu}m$). Anomocytic stomata complex were the most frequent type (rarely cyclocytic), with usually both anomocytic and actinocytic types occurring in one leaf. On the surfaces, both the adaxial and abaxial anticlinal walls of the subsidiary cells vary (e.g., straight/curved, undulate, sinuate). Four types (unicellular non-glandular trichome, stellate, glandular trichome, pustular glandular trichome) of trichomes are found in the leaves. The epicuticular wax can be divided two types: membraneous platelets (Lyonothamnus) and platelets (Sorbaria arborea var. arborea, S. arborea var. subtomentosa, S. kirilowii, S. tomentosa var. tomentosa, Spiraeanthus schrenkianus). The trichome diversity (in particular, stellate, gland) and the existence of epicuticular wax may have taxonomic significance, although the leaf epidermal micromorphological characteristics do not provide synapomorphy in this tribe. These leaf micromorphological features are most likely better understood in the Sorbarieae when used in conjunction with external morphological characters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.1
• /
• pp.30-39
• /
• 2020

A new silicate coating technology was developed which reduces the impact of dust and loosening during seeding compared to existing silicate-coatings (Seed/Si/Zeolite), and therefore can lower the production costs of rice cultivation. In this method, 100 g of rice seed is coated with 18 mL of liquid silicic acid and then dressed with a mixture containing 80 g of dolomite and 5 g of iron. To determine the most effective method of application and ensure that seedlings developed healthily, a series of experiments were carried out. Infected seeds scattered in seedling boxes and pots (soil and hydroponic) were coated dry, without disinfection. In comparison to the seed which were not treated with the silicate-coating, the new seed (A) were 1.84 times heavier in weight, and were also improved in terms of coating strength and coating color. Compared to the seedlings grown from the non-coated seed, those grown from the new silicate-coated seed were of significantly higher quality (weight/length) and had erect, dark greenish leaves, which are ideal plant characteristics. This was most likely due to increased silicate uptake. The symptoms of bakanae disease in the non-coated seed peaked after 38 days to 54.2%, whereas the control value was 68.8% in the new silicate-coated seed (A). In the infected seedlings grown from the new silicate-coated rice seed, subnormal macro-conidia, namely, a sickle shape spore without a septum; a straight oblong shape spore without a septum and with a thick cell wall; and inter-septal necrosis of a normal spore were detected. It is believed that the strong alkalinity of silicic acid have acted as unfavorable conditions for pathogenicity. In seedlings grown from the new silicate coated rice seed under hydroponic conditions without nutrients, normal root activity and growth was maintained without leaf senescence. Therefore, it was possible to reduce the rate of fertilization. In the future, a new silicate-coated rice seed was required for the study of minimal nutrition for anti-aging of seedlings.