• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.11-18
• /
• 2016

Magnetic resonance image (MRI) is widely used in brain research field and medical image. Especially, non-invasive brain activation acquired image technique, which is functional magnetic resonance image (fMRI) is used in brain study. In this study, we investigate brain activation occurred by LED light stimulation. For investigate of brain activation in experimental small animal, we used high magnetic field 9.4T MRI. Experimental small animal is Balb/c mouse, method of fMRI is using echo planar image (EPI). EPI method spend more less time than any other MRI method. For this reason, however, EPI data has low contrast. Due to the low contrast, image pre-processing is very hard and inaccuracy. In this study, we planned the study protocol, which is called block design in fMRI research field. The block designed has 8 LED light stimulation session and 8 rest session. All block is consist of 6 EPI images and acquired 1 slice of EPI image is 16 second. During the light session, we occurred LED light stimulation for 1 minutes 36 seconds. During the rest session, we do not occurred light stimulation and remain the light off state for 1 minutes 36 seconds. This session repeat the all over the EPI scan time, so the total spend time of EPI scan has almost 26 minutes. After acquired EPI data, we performed the analysis of this image data. In this study, we analysis of EPI data using statistical parametric map (SPM) software and performed image pre-processing such as realignment, co-registration, normalization, smoothing of EPI data. The pre-processing of fMRI data have to segmented using this software. However this method has 3 different method which is Gaussian nonparametric, warped modulate, and tissue probability map. In this study we performed the this 3 different method and compared how they can change the result of fMRI analysis results. The result of this study show that LED light stimulation was activate superior colliculus region in mouse brain. And the most higher activated value of segmentation method was using tissue probability map. this study may help to improve brain activation study using EPI and SPM analysis.

• Child Health Nursing Research
• /
• v.6 no.3
• /
• pp.411-422
• /
• 2000

Considering the rapid change of modern nursing knowledge, it is necessary to make changes in the curriculum of nursing education periodically according to the patient-nursing needs and the students' needs. This means that nursing education has to provide opportunities for the development of knowledge, skills, and attitudes. Also, as the students of the RN-BSN program being all registered nurses, the education program for them is planned differently from the general undergraduate program. This study was conducted to establish the scope of educational contents of pediatric nursing in RN-BSN program. The contents of the pediatric nursing curriculum and its necessity was identified and reviewed. From June 5 to June 30 2000, data were collected from 309 RN-BSN students in 5 nursing schools. The questionnaire used for this study was developed by their researchers and the Korean Nursing Association and consisted of items according to the curriculum contents of pediatric nursing. The data were analyzed through frequency and percentages and was analyzed using SPSSWIN 10.0 programs. The results were as follows: 1.In the section surveying on the credits of pediatric theory and clinical practice, 3 out of 5 schools had 2 credits in theory (60.0%), and 2 credits for clinical practice in 2 schools, and 2 credits were given to the elective practice in 2 other schools. 2. In analyzing the degree of demand for lecture and clinical practice, 52.1% of students preferred lectures to be given by professors and 53.7% preferred their level of undergraduate knowledge updated and finally most of the students (81.9%) didn't want to do the clinical practice. 3.The students weighted the importance of current curriculum contents as follows : sex education of adolescence(60.8%), high-risk infant(59.5%), sex education of school age children(59.2%), the handicapped children (55.7%), health assessment(52.4%), children with pneumonia(51.5%), children with asthma (47.1%), children with burns(41.1%). In conclusion, there is a need for research to measure the degree of education satisfaction and needs in RN-BSN students and to improve the curriculum contents in pediatric nursing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.2
• /
• pp.67-74
• /
• 2010

A variation of temperature acting on a RC roof slab causes a change of stress in concrete since it expands during summer and is compressed during winter. This behavior repeats annually and makes an affection to the structural capacity of member for both serviceability and ultimate level. In this paper, a cyclic temperature loading variation is calculated by analyzing the weather data of Korea for 20 years. In addition, an experimental work is planned to find the long term effect of temperature variation. Six RC slab are made with same dimension. Test parameters are loading duration (10, 20, 30 year) and whether it has pre-damage or not. Observation of stiffness variations according to cyclic loading period shows that the serious stiffness drop happens after 10 year's cyclic loading at summer while after 30 year's loading at winter. From the fracture test about slabs damaged by long term cyclic loading, however, the capacity of member such as initial stiffness and maximum strength were not changed except yield strength according to the period of long term cyclic loading. The yield strength tends to decrease after 20 year's cyclic loading.

• Archives of design research
• /
• v.17 no.3
• /
• pp.231-244
• /
• 2004

The curriculum in the vocational training shall be planed and operated on a basis what is the occupational category that the students can be employed after their graduation and the ability necessary to the engagement in their occupations. Accordingly, the course selecting the quality of education in the curriculum plan for the vocational training shall be developed continuously and gradually through the maintenance of dose relation by the participation of the persons in the industries related to the major field. If the curriculum in the vocational training is for the preparation of employment, the focus of curriculum shall be adjusted to the employment. It needs to collect and analyze the related data between the universities and industries, particularly regional industries synthetically in order to develop the curriculum in the vocational training. The curriculum shall be planned on a basis of the data. As for the data related to the local community, it needs to develop new programs considering the prospect of demand of manpower by the industry, necessary knowledge, technology and attitudes, particularly considering the occupational category available in the employment with a bright prospect hereafter. Also, the contents to improve in the existing curriculum(a change of technology, a form of facilities for experimentㆍpractice, and a type of continuing & further education) shall be investigated and analyzed objectively. Accordingly, this study is to develop the curriculum more systematically in order to foster the character designer specially who to engage in the character industry that increases its role and expectation all the more with the development of animation industries and the extension of markets now. The purpose of this study is to decrease the estrangement between the school education that has been problems and the practical affairs in the field, to foster the special manpower that can satisfy the industries demand.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.89-100
• /
• 2014

The Campus Core is centered at the physical, functional and symbolic environment of a university, which is known as the top academic institution, hence it metaphorically represents not only the educational philosophy when institution first opened, but also the transformed values of the time. Today, universities are asked to actively communicate with the local community in terms of function and be remodeled as pedestrian-friendly campuses in terms of physical environment. For this reason, the study comprehends the concept of the campus core in accordance with a pedestrian-friendly environment and suggests a practical plan for campus cores of district national universities based on previous research examination. Since the purpose of the study is to suggest a change in the circulation system centered on vehicle use to transform into a pedestrian-friendly environment through a planned approach while introducing public mixed-use at the same time, the study supports the fact that it is possible to reorganize the strategy of a pedestrian-friendly circulation system and partially revise the land utilization to yield the expected outcomes. Thus, this study will provide valid suggestions for similar maintenance plans while looking back to the meaning and value of today's campus core.

• International Journal of Highway Engineering
• /
• v.18 no.1
• /
• pp.13-21
• /
• 2016

PURPOSES : In this study, we analyzed the compressive strength characteristics of lean base concrete in relation to changes in the outdoor temperature after analyzing the cold and hot weather temperature standards and calculated the minimum and maximum temperatures when pouring concrete. We examined the rate of strength development of lean base concrete in relation to the temperature change and derived an appropriate analysis formula for FRC base structures by assigning the accumulated strength data and existing maturity formula. METHODS : We measured the strength changes at three curing temperatures (5, 20, and $35^{\circ}C$) by curing the concrete in a temperature range that covered the lowest temperature of the cold period, $5^{\circ}C$, to the highest temperature of the hot period, $35^{\circ}C$. We assigned the general lean concrete and FRC as test variables. A strength test was planned to measure the strength after 3, 5, 7, 14, and 28 days. RESULTS : According to the results of compressive strength tests of plain concrete and FRC in relation to curing temperature, the plain concrete had a compressive strength greater than 5 MPa at all curing temperatures on day 5 and satisfied the lean concrete standard. In the case of FRC, because the initial strength was substantially reduced as a result of a 30% substitution of fly ash, it did not satisfy the strength standard of 5 MPa when it was cured at $5^{\circ}C$ on day 7. In addition, because the fly ash in the FRC caused a Pozzolanic reaction with the progress into late age, the amount of strength development increased. In the case of a curing temperature of $20^{\circ}C$, the FRC strength was about 66% on day 3 compared with the plain concrete, but it is increased to about 77% on day 28. In the case of a curing temperature of $35^{\circ}C$, the FRC strength development rate was about 63% on day 3 compared with the plain concrete, but it increased to about 88% on day 28. CONCLUSIONS : We derived a strength analysis formula using the maturity temperatures with all the strength data and presented the point in time when it reached the base concrete standard, which was 5 MPa for each air temperature. We believe that our findings could be utilized as a reference in the construction of base concrete for a site during a cold or hot weather period.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.1
• /
• pp.67-77
• /
• 2008

Seismic isolation has been studied continuously as a solution of the seismic engineering to reduce the sectional forces and the damages of structures caused by earthquakes. To certify reliable design and installation of the seismic isolation systems, seismic isolation bearings should be fabricated under well planned quality control process, and proper evaluation tests for their seismic performance should be followed. In this study, shear property evaluation tests for the lead rubber bearings(LRB) and the rubber bearings(RB) were implemented and the temperature dependency tests were also implemented to evaluate the changes of shear properties according to the changes of temperature. After evaluation tests, the measured shear properties were compared to their design values and their deviation was analyzed comparing with the allowable error ranges specified in Highway Bridge Design Specifications. These results showed that a considerable number of isolation bearings have so large deviations from their design values that their error ranges were over or very close to the allowable ranges. And the test results for temperature dependency showed that the shear properties of isolation bearings would be changed in great degree by the change of temperature during their service period. If these two types of changes in their shear properties are superposed, it would possible that the changes of shear properties from their original design values are over than 50%.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.277-285
• /
• 2010

Geostationary Ocean Color Imager(GOCI-I), the world's first space-borne ocean color observation geostationary satellite, will be launched on June 2010. Development of GOCI-I took about 6 years, and its expected lifetime is about 7 years. The mission and user requirements of GOCI-II are required to be defined at this moment. Because baseline of the main mission of GOCI-II must be defined during the development time and early operational period of GOCI-I. The main difference between these missions is the global-monitoring capability of GOCI-II, which will meet the necessity of the monitoring and research on climate change in the long-term. The user requirements of GOCI-II will have higher spatial resolution, $250m{\times}250m$, and 12 spectral bands to fulfill GOCI-I's user request, which could not be implemented on GOCI-I for technical reasons. A dedicated panchromatic band will be added for the nighttime observation to obtain fishery information. GOCI-II will have a new capability, supporting user-definable observation requests such as clear sky area without clouds and special-event areas, etc. This will enable higher applicability of GOCI-II products. GOCI-II will perform observations 8 times daily, the same as GOCI-I's. Additionally, daily global observation once or twice daily is planned for GOCI-II. In this paper, we present an improved development and organization structure to solve the problems that have emerged so far. The hardware design of the GOCI-II will proceed in conjunction with domestic or foreign space agencies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.473-482
• /
• 2021

The introduction of automated flight systems has greatly improved aviation safety, but aircraft pilots continue to face new challenges. The pilot's stress from an aeronautical perspective can be distinguished by the 'Startle and Surprise' responses. 'Startle' is a short, strong physiological response to sudden or threatening stimuli such as unexpected gunfire. 'Surprise' is a cognitive-emotional response to an event that goes beyond one's expectations. In Martin et al.'s (2012) Startle Effect Experiment, the pilot identified physiological responses in the 'Startle' state, including delayed response and increased heart rate. In the Rahim (2020) Startle/Surprise experiment, the pilot's breathing rate and pulse rate did not change due to pre-planned emergency training. On the other hand, it was confirmed that the pilot's respiratory and heart rate were greatly increased due to the complicated aircraft and unplanned emergencies. Based on the results of these experiments, domestic pilots need to be trained to handle non-technical and various unexpected emergencies that could arise in an aircraft, rather than be just put through courses for enhancing technical capabilities or simple repetitive training as required by aviation law.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.182-187
• /
• 2019

With the transition to the era of the Fourth Industrial Revolution, movements of overall change, including technology, society and culture, are becoming increasingly diverse. Among these, even the manufacturing industry, which can be regarded as Korea's leading core industry, is also seeing great changes centered on smart factories. Expert analyses and corporate opinions suggest that smart factories are needed to be competitive in the manufacturing sector. In this study, the impact of small and medium manufacturers' awareness regarding smart factories was analyzed through a survey. The results showed that the need for smart plant construction and the degree of awareness regarding this was very high. In a survey of the planned or implemented level, more companies were expected to deploy, implement, and reduce instruments than those that did not have a plan to build smart factories. The main difficulties involved in deployment were funding problems and the results of the preliminary review phase were derived in order to successfully build a smart factory. Therefore, financial support was most needed to build smart factories, and a need to upgrade the support amount, match it with suppliers for a preliminary review and expand consulting was found.