• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.425-429
• /
• 1992

Point sets in the Euclidean and digital planes are discussed. The local necessary and sufficient conditions are suggested for pointed lattice extraction from these sets are presented. A number of theorems and corollaries are given. The regular and "almost" regular point sets are studied. The results can be used in automatic control of textured textile images by both general and multiprocessing systems.g systems.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.172-181
• /
• 2018

Objective: This study was performed to investigate buccal facial depth (BFD) changes after extraction and nonextraction orthodontic treatments in post-adolescent and adult female patients, and to explore possible influencing factors. Methods: Twelve and nine female patients were enrolled in the extraction and nonextraction groups, respectively. Changes in BFD in the defined buccal region and six transverse and two coronal measuring planes were measured after registering pretreatment and posttreatment three-dimensional facial scans. Changes in posterior dentoalveolar arch widths were also measured. Treatment duration, changes in body mass index (BMI), and cephalometric variables were compared between the groups. Results: BFD in the buccal region decreased by approximately 1.45 mm in the extraction group, but no significant change was observed in the nonextraction group. In the extraction group, the decrease in BFD was identical between the two coronal measuring planes, whereas this differed among the six transverse measuring planes. Posterior dentoalveolar arch widths decreased in the extraction group, whereas these increased at the second premolar level in the nonextraction group. The treatment duration of the extraction group was twice that of the nonextraction group. No differences were found in BMI and Frankfort horizontal-mandibular plane angle changes between the groups. BFD changes in the buccal region moderately correlated with treatment duration and dental arch width change. Conclusions: BFD decreased in adult female patients undergoing extraction, and this may be influenced by the long treatment duration and constriction of dentoalveolar arch width. However, nonextraction treatment did not significantly alter BFD.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2530-2544
• /
• 2018

In this paper, we propose an enhanced LiDAR-camera calibration method that extracts the marker plane from 3D point cloud information. In previous work, we estimated the straight line of each board to obtain the vertex. However, the errors in the point information in relation to the z axis were not considered. These errors are caused by the effects of user selection on the board border. Because of the nature of LiDAR, the point information is separated in the horizontal direction, causing the approximated model of the straight line to be erroneous. In the proposed work, we obtain each vertex by estimating a rectangle from a plane rather than obtaining a point from each straight line in order to obtain a vertex more precisely than the previous study. The advantage of using planes is that it is easier to select the area, and the most point information on the board is available. We demonstrated through experiments that the proposed method could be used to obtain more accurate results compared to the performance of the previous method.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1652-1659
• /
• 2004

본 논문에서는 영상의 기하학 정보를 이용하여 기저 평면에서 움직이는 객체의 높이를 자동으로 측정하는 알고리즘을 제안한다. 기존의 알고리즘은 설정된 위치에서 이동하는 객체의 높이를 각 프레임 마다 사용자 입력을 통해 측정하여 실시간에 이용할 수 없는 문제점이 있다. 이를 해결하기 위해, 입력 영상에서 움직임 객체의 영역을 추출하여 객체의 높이를 자동으로 측정한다. 입력 영상에서 픽셀 정보와 시간적인 정보를 이용하여 움직임 객체를 추출하고 반복적인 계산을 통해 실제와 근소한 객체의 바닥점과 높이점을 추출한다 이 두 점 사이의 높이 계산은 기하학정보인 소실점(Vanishing point), 소실선(Vanishing line)과의 계산을 통해 이루어진다. 측정된 높이는 신뢰도 평가를 통해 모의실험에서 실제 높이와 유사한 결과를 확인하였다.

• 대한치과교정학회지
• /
• 제51권3호
• /
• pp.166-178
• /
• 2021

Objective: To investigate dimensional changes in regional pharyngeal airway spaces after premolar extraction in bimaxillary skeletal protrusion (BSP) patients according to vertical skeletal pattern, and to further identify dentoskeletal risk factors to predict posttreatment pharyngeal changes. Methods: Fifty-five adults showing BSP treated with microimplant anchorage after four premolar extractions were included in this retrospective study. The subjects were divided into two groups according to the mandibular plane steepness: hyperdivergent (Frankfort horizontal plane to mandibular plane [FH-MP] ≥ 30) and nonhyperdivergent groups (FH-MP < 30). The control group consisted of 20 untreated adults with skeletal Class I normodivergent pattern and favorable profile. Treatment changes in cephalometric variables were evaluated and compared. The association between posttreatment changes in the dentoskeletal and upper airway variables were analyzed using linear regression analysis. Results: The BSP patients showed no significant decrease in the pharyngeal dimensions to the lower level in comparison with controls, except for middle airway space (MAS, p < 0.01). The upper airway variable representing greater decrease in the hyperdivergent group than in the nonhyperdivergent group was the MAS (p < 0.01). Posttreatment changes in FH-MP had negative correlation with changes in MAS (β = -0.42, p < 0.01) and inferior airway space (β = -0.52, p < 0.01) as a result of multivariable regression analysis adjusted for sagittal skeletal relationship. Conclusions: Decreased pharyngeal dimensions after treatment in BSP patients showed no significant difference from the normal range of pharyngeal dimensions. However, the glossopharyngeal airway space may be susceptible to treatment when vertical dimension increased in hyperdivergent BSP patients.

• 한국재료학회지
• /
• 제15권10호
• /
• pp.626-631
• /
• 2005

GaN-related compound semiconductors were grown on the corrugated interface substrate using a metalorganic chemical vapor deposition system to increase the optical power of white LEDs. The patterning of substrate for enhancing the extraction efficiency was processed using an inductively coupled plasma reactive ion etching system and the surface morphology of the etched sapphire wafer and that of the non-etched surface were investigated using an atomic force microscope. The structural and optical properties of GaN grown on the corrugated interface substrate were characterized by a high-resolution x-ray diffraction, transmission electron microscopy, atomic force microscope and photoluminescence. The roughness of the etched sapphire wafer was higher than that of the non-etched one. The surface of III-nitride films grown on the hemispherically patterned wafer showed the nano-sized pin-holes that were not grown partially. In this case, the leakage current of the LED chip at the reverse bias was abruptly increased. The reason is that the hemispherically patterned region doesn't have (0001) plane that is favor for GaN growth. The lateral growth of the GaN layer grown on (0001) plane located in between the patterns was enhanced by raising the growth temperature ana lowering the reactor pressure resulting in the smooth surface over the patterned region. The crystal quality of GaN on the patterned substrate was also similar with that of GaN on the conventional substrate and no defect was detected in the interface. The optical power of the LED on the patterned substrate was $14\%$ higher than that on the conventional substrate due to the increased extraction efficiency.

• 대한치과교정학회지
• /
• 제46권4호
• /
• pp.242-252
• /
• 2016

Objective: Orthodontic mini-implants (OMI) generate various horizontal and vertical force vectors and moments according to their insertion positions. This study aimed to help select ideal biomechanics during maxillary incisor retraction by varying the length in the anterior retraction hook (ARH) and OMI position. Methods: Two extraction models were constructed to analyze the three-dimentional finite element: a first premolar extraction model (Model 1, M1) and a residual 1-mm space post-extraction model (Model 2, M2). The OMI position was set at a height of 8 mm from the arch wire between the second maxillary premolar and the first molar (low OMI traction) or at a 12-mm height in the mesial second maxillary premolar (high OMI traction). Retraction force vectors of 200 g from the ARH (-1, +1, +3, and +6 mm) at low or high OMI traction were resolved into X-, Y-, and Z-axis components. Results: In M1 (low and high OMI traction) and M2 (low OMI traction), the maxillary incisor tip was extruded, but the apex was intruded, and the occlusal plane was rotated clockwise. Significant intrusion and counter-clockwise rotation in the occlusal plane were observed under high OMI traction and -1 mm ARH in M2. Conclusions: This study observed orthodontic tooth movement according to the OMI position and ARH height, and M2 under high OMI traction with short ARH showed retraction with maxillary incisor intrusion.

• 대한전자공학회논문지SP
• /
• 제38권5호
• /
• pp.498-508
• /
• 2001

본 논문에서는 zoom 영상 세트로부터 최적의 깊이와 텍스쳐 정보를 추출하는 효과적인 영상 코딩 알고리듬을 제안하였다. 제안된 알고리듬은 깊이 추출 단계와 텍스쳐 추출의 2단계로 구성되어 있다. 물체 공간에서 X-Y면을 삼각패치로 나누고 각 삼각패치 노드의 깊이 값은 깊이 추출 단계에서 결정한 후, 두 번째 단계에서 각 삼각패치의 텍스쳐를 추출한다. 깊이 추출 단계에서는 각 삼각패치의 노드를 중심으로 이루어진 사각형 윈도우 영역에 대하여 블록에 기반한 변이 보상 방법을 적용함으로 노드의 깊이를 결정한다. 텍스쳐 추출 단계에서는 아휜 변환에 기반한 변이 보상 모델을 이용하여 zoom 영상으로부터 삼각패치의 텍스쳐가 추출된다. 영상의 화질을 개선하기 위하여, 영상 평면에서 보정하는 대신 물체 공간에서 보정을 수행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권1호
• /
• pp.77-81
• /
• 2006

The commercially available Amberlite XAD-2 and XAD-4 resins were modified with macrocyclic protoporphyrin IX (PPIX) or tetrakis(p-carboxyphenyl) porphyrin (TCPP) to enhance the adsorption capacity for phenol and chlorophenols. The chemically modified polymeric adsorbents (XAD-2+PPIX, XAD-2+TCPP, XAD-4+PPIX, and XAD-4+TCPP) were applied to the solid phase extraction as an adsorbent material for the preconcentration of phenol and chlorophenols in environmental waters. Generally, the synthesized adsorbents showed higher recoveries than underivatized adsorbents, XAD-2 and XAD-4, without matrix interferences. Especially, XAD-4+PPIX showed more than 90% recoveries for all compounds used in this study including hydrophilic phenol. The major factor for the increase of the adsorption capacity was the increase of $\pi$-$\pi$ interaction between adsorbents and samples due to the introduction of the porphyrin molecule. However, the breakthrough volumes and recovery values of the XADs+TCPP columns were slightly decreased for the bulky chlorophenols such as TCP and PCP. Using molecular mechanics methods, the structures of TCPP and PPIX were compared with that of porphine, the parent molecule of porphyrin. Four bulky p-carboxyphenyl groups of TCPP were torsional each other, thus the molecular plane of TCPP were not on the same level. In conclusion, the decrease of breakthrough volumes and recovery values of XADs+TCPP columns for bulky phenols can be explained by the steric hindrance of the $\pi$-$\pi$ interaction between porphyrin plane and the phenols.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.120-128
• /
• 2020

Objective: The aims of the present study were to evaluate the changes in the maximum lip-closing force (MLF) after orthodontic treatment with or without premolar extractions and verify the correlation of these changes with dentoskeletal changes. Methods: In total, 17 women who underwent nonextraction orthodontic treatment and 15 women who underwent orthodontic treatment with extraction of all four first premolars were included in this retrospective study. For all patients, lateral cephalograms and dental models were measured before (T0) and after (T1) treatment. In addition, MLF was measured at both time points using the Lip De Cum LDC-110R^® device. Statistical analyses were performed to evaluate changes in clinical variables and MLF and their correlations. Results: Both groups showed similar skeletal patterns, although the extraction group showed greater proclination of the maxillary and mandibular incisors and lip protrusion compared to the nonextraction group at T0. MLF at T0 was comparable between the two groups. The reduction in the arch width and depth and incisor retroclination from T0 to T1 were more pronounced in the extraction group than in the nonextraction group. MLF in the extraction group significantly increased during the treatment period, and this increase was significantly greater than that in the nonextraction group. The increase in MLF was found to be correlated with the increase in the interincisal angle and decrease in the intermolar width, arch depth, and incisor-mandibular plane angle. Conclusions: This study suggests that MLF increases to a greater extent during extraction orthodontic treatment than during nonextraction orthodontic treatment.