• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.119-122
• /
• 1987

By cascading the step discontinuities on planar dielectric waveguides with a ferrite layer through two uniform planar dielectric waveguides, nonreciprocal scaterring characteristics of planar dielectric waveguide gratings are analyzed. The calculated results at 35GHz shows that the isolation mechanism takes place near band stop frequency range.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.149-154
• /
• 1996

We propose the concept of incident angle of complex number and analyze planar optical waveguides by applying the concept. The incident angle of complex number is concerned with the modeling of prism-gap-waveguide structures. It is shown that, when optical waveguides are analyzed by use of the transfer matrix method, the proposed concept enable us to find solutions faster and more accurately than ghatak's method which introduces the leaky structure.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.946-953
• /
• 1999

The etching characteristics of Er-doped sodium borosilicate glass film for the planar optical waveguides were investigated using reactive ion etching. The etch rate decreased as the pressure in creased but increased as the RF power increased. The etch rate increased as the flow rate C2F gas and the amount of O2 addition increased but decreased over critical point (C2F6 7,5 accm O2 20%) The etch rate was 180${\AA}$/min under C2F6 7.5 sccm O2 20% RF power 270 W, pressure 150 mTorr. With this optimum etching condition and subsequent heat treatment at 975$^{\circ}C$ for 30 minutes planar optical waveguides having improved sidewall roughness were fabricated successfully.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.8-14
• /
• 1992

The radiation pattern of a rectangular-grid array antenna consisted of rectangular waveguides is represented by multiplication of its element and array factors. Calculated radiation patterns for excitation of TES110T mode inside the waveguides suffer from the blindness at a particular direction on E-plane. Numerical simulations show that the blindness can be removed by inserting dielectric plug inside the waveguides or covering dielectric sheath in front of the waveguides.

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.84-93
• /
• 1998

Planar graded index optical waveguides have been formed by Ag$^{+}$ ion exchange in the BK7 optical glass. The experimental results of diffusion and modal characteristics of Ag$^{+}$-Na$^{+}$ exchanged BK7 glass waveguides are presented. Measurements of the mode indices have been measured. We found the relations between the process and device parameters such as the diffusion depth and the square root of the diffusion time, diffusion coefficient and diffusion temperature, and diffusion ion concentration and surface index change. A theoretical gaussian function refractive index profile matched best with the measured data for all the guided modes. The empirical relations between the process and the device parameters are derived and subsequently used to formulate a systematic procedure for fabricating singlemode and multimode waveguides.uides.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.141-144
• /
• 2002

Computer code was developed to design waveguide gratings based on coupled-mode equations and the transfer matrix formalism. The experimental set-up has been constructed for inscribing Bragg gratings in planar waveguides with a phase mask and uv laser beam, which enables alignment and packaging of grating devices as well as in-situ performance measurements. Bragg grating has been fabricated on silica planar waveguides with 0.75% Germanium concentration and its transmittance spectrum was measured to have 95% reflectance at the peak wavelength. Optical losses as the function of the misalignment were measured and their usage is described.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.371-378
• /
• 1992

본 논문에서는 Y-cut $LiNbO_3$ 기판 위에 TIPE 방식을 이용하여 평면 광도파로 렌즈를 제작하고 그 특성을 측정하였다. Ti 내부확산 평면광도파로 및 TIPE 평면 광도파로 제작하고, 프리즘 결합으로 굴절율을 측정하였다. 측정한 기본파 유효굴절율로부터 평면 광도파로 렌즈의 궤적을 구하여, 사진식각법과 lift-off기법을 이용하여 TIPE 평면 광도파로 렌즈를 제작하였다. 도파로를 따라 도파되던 광이 평면 광도파로 렌즈에 의하여 접속되는 현상을 관측하였고 측정한 결과와 컴퓨터 시뮬레이션의 결과가 잘 일치함을 알 수 있었다. 관측한 초점의 위치 및 크기가 설계한 값과 잘 일치하였다.

• 한국광학회지
• /
• 제7권2호
• /
• pp.136-141
• /
• 1996

본 논문에서는 두 개의 비선형 박막으로 둘러싸인 평면 광도파로에서의 TE 비선형 도파광 특성에 대한 새로운 접근 방법을 제안한다. 비선형 박막에 대한 특성을 묘사하는 비선형 특성행렬을 이용하여 비선형 광도파로에 대한 비선형 분산 방정식을 해석적 형태로 유도한다. 분산 방정식을 기반으로 하는 전산시늉으로 도파광의 파워에 대한 모드 굴절율 변화, 전장의 세기가 최대인 위치, 그리고 파워 분포 등의 도파광의 비선형 특성을 계산한다. 자기-집속형 광도파로 구조에서 비선형 박막의 두께를 감소하면 파워-의존 비선형 모드 굴절율의 광학적 쌍안정 특성이 나타나며 광학적 쌍안정 특성을 위한 임계 파워는 증가한다. 그리고 비선형 광도파로 구조 내부의 파워분포 특성은 비선형 Fabry-Perot etalon의 동작 특성과 유사한 광학적 쌍안정 특성을 나타낸다.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.97-102
• /
• 2010

Propagation modes of symmetric metal-insulator-metal SPP waveguides are analyzed. Main characteristics of these waveguides such as mode effective index, propagation length, and penetration depths are calculated at the telecom wavelength for different layer thickness. We adopt Au, Al as a metal material and air, glass as a dielectric material and obtain different optical characteristics. The surface plasmon characteristics in this paper provide a numerical insight for designing nanostructure metal plasmon waveguide.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.162-165
• /
• 2008

A novel planar lightwave circuit(PLC) triplexer using a three-waveguide interferometer(TWI) is proposed and examined using the transfer matrix and the beam propagation methods. The proposed triplexer consists of two three-waveguide couplers and three waveguides connecting the couplers. Simulation for the TWI triplexer shows the excess losses of 0.03 dB and 0.94 dB with the crosstalks of -22.3 dB and -14.5 dB in reception, respectively, for the wavelength of 1490- and 1550-nm, while showing the excess loss of 1.75 dB in transmission for the wavelength of 1310 nm. The proposed design shows compact feature as short as 11.5 mm for the refractive-index contrast of 0.45%.