• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.1093-1104
• /
• 2014

The High Efficiency Video Coding (HEVC) is a new video coding standard that can provide much better compression efficiency than its predecessor H.264/AVC. However, it is computationally more intensive due to the use of flexible quadtree coding unit structure and more choices of prediction modes. In this paper, a fast intraframe coding scheme is proposed for HEVC. Firstly, a fast bottom-up pruning algorithm is designed to skip the mode decision process or reduce the candidate modes at larger block size coding unit. Then, a low complexity rough mode decision process is adopted to choose a small candidate set, followed by early DC and Planar mode decision and mode filtering to further reduce the number of candidate modes. The proposed method is evaluated by the HEVC reference software HM8.2. Averaging over 5 classes of HEVC test sequences, 41.39% encoding time saving is achieved with only 0.77% bitrate increase.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.441-448
• /
• 2000

An investigation into the nonlinear free vibrations of a cantilever beam which can have not only planar motion but also nonplanar motion is made. Using Galerkin's method based on the first mode in each motion, we transform the boundary and initial value problem into an initial value problem of two-degree-of-freedom system. The system turns out to have two normal modes. By Synge's stability concept we examine the stability of each mode. In order to check validity of the stability we obtain the numerical Poincare map of the motions neighboring on each mode.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.555-572
• /
• 2015

This paper presents an experimental study of three two-dimensional (2D/planar) steel reinforced concrete (SRC) T-shaped column-RC beam hybrid joints and six 3D SRC T-shaped column-steel beam hybrid joints under low cyclic reversed loads. Considering different categories of steel configuration types in column cross section and horizontal loading angles for the specimens were selected, and a reliable structural testing system for the spatial loading was employed in the tests. The load-displacement curves, carrying capacity, energy dissipation capacity, ductility and deformation characteristics of the test subassemblies were analyzed. Especially, the seismic performance discrepancies between planar hybrid joints and 3D hybrid joints were intensively compared. The failure modes for planar loading and spatial loading observed in the tests showed that the shear-diagonal compressive failure was the dominating failure mode for all the specimens. In addition, the 3D hybrid joints illustrated plumper hysteretic loops for the columns configured with solid-web steel, but a little more pinched hysteretic loops for the columns configured with T-shaped steel or channel-shaped steel, better energy dissipation capacity & ductility, and larger interlayer deformation capacity than those of the planar hybrid joints. Furthermore, it was revealed that the hysteretic loops for the specimens under $45^{\circ}$ loading angle are generally plumper than those for the specimens under $30^{\circ}$ loading angle. Finally, the effects of steel configuration type and loading angle on the seismic damage for the specimens were analyzed by means of the Park-Ang model.

• 한국광학회지
• /
• 제10권4호
• /
• pp.311-317
• /
• 1999

다이오드 레이저 펌핑 Nd:YAG 레이저를 평면 반일체 고리형 공진기를 이용하여 1064 nm 파장에서 단방향, 단일 모드로 발진시켰다. 실험에 사용된 반일체 고리형 공진기는 자기장 내에 놓여진 Nd:YAG 레이저 활성매질, 결정 석영판, 출력경으로 구성되어 전체적으로 광 다이오드로서 작용한다. 이에 대한 고유편광 이론 연구가 수행되었으며, 고유편광 모드에 대한 광손실이 계산되었다. 1.2 W, 809 nm 다이오드 레이저로 펌핑하여 155 mW의 단일 모드 출력을 얻었으며, 이때의 기울기 효율은 17%이었다. 동일한 두 레이저 시스템이 제작되었는데, 그 출력들의 맥놀이 주파수 스펙트럼으로부터 100 kHz 이하의 레이저 선폭을 갖는 것으로 측정되었고, 2 GHz 이상의 영역에서 연속적인 주파수 튜닝이 관측되었다.

• 제어로봇시스템학회논문지
• /
• 제18권6호
• /
• pp.555-561
• /
• 2012

This paper describes the design of a fuzzy adaptive sliding mode controller for tracking control of robotic manipulators. The proposed controller incorporates a modified traditional sliding mode controller to drive the system state to a sliding surface and then keep the system state on this surface, and a fuzzy logic controller to accelerate the reaching phase. The stability of the control system is ensured by using Lyapunov theory. To verify the effectiveness of the proposed controller, computer simulation is conducted for a five-bar planar robotic manipulator. The simulation results show that the proposed controller can improve the reaching time and eliminate chattering of the control system at the same time.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.2116-2124
• /
• 2018

Magnetic levitation system with the advantages of non-contact, no friction and no wear can satisfy the requirement of high precision and high speed positioning. In this paper, magnetic levitation positioning stage which mainly consists of planar coil and HALBACH permanent magnet array and its control and driving system are designed. Magnetic levitation system is a highly nonlinear and strongly coupled complex system and its control performance can be influenced by the uncertainty and external disturbance. So exact feedback linearization method is used to realize exact linearization and decoupling, and a strategy of sliding mode control based on disturbance observer is proposed to compensate the uncertainty and external disturbance. Detailed proofs of observer's convergence property and system stability are derived. Both the simulation and experiment results verify the effectiveness of sliding mode control algorithm based on disturbance observer.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.639-653
• /
• 2016

The present article discusses the effect of the ratio of bridge surface to total shear surface, number of bridge areas and normal stress on the failure behavior of the planar non-persistent open joints. Totally, 38 models were prepared using plaster and dimensions of $15cm{\times}15cm{\times}15cm$. The bridge area occupied $45cm^2$, $90cm^2$ and $135cm^2$ out of the shear surface. The number of rock bridges increase in fixed area. Two similar samples were prepared on every variation in the rock bridges and tested for direct shear strength under two high and low normal loads. The results indicated that the failure pattern and the failure mechanism is mostly influenced by the ratio of bridge surface to total shear surface and normal stress so that the tensile failure mode change to shear failure mode by increasing in the value of introduced parameters. Furthermore, the shear strength and shear stiffness are closely related to the ratio of bridge surface to total shear surface, number of bridge areas and normal stress.

• 대한토목학회논문집
• /
• 제10권3호
• /
• pp.19-28
• /
• 1990

현수 곡선부재가 면내 자유진동할 때 발생하는 변위에 의한 합응력과 질량을 갖는 부채의 미소요소에 작용하는 관성력에 대한 동적 평형방정식을 이용하여 현수 곡선부재의 면내 자유진동을 지배하는 미분방정식을 유도하였다. 이 미분방정식에는 회전관성효과를 고려하였다. 이 미분방정식을 양단힌지 및 양단고정의 단부조건을 갖는 현수 곡선부재에 적용시키고 고유진동수와 진동형을 구하기 위하여 시행착오적 고유치문제와 Improved Euler method를 이용하여 수치해석 하였다. 수치해석 결과로 회전관성이 고유진동수에 미치는 영향을 고찰하고, 고유 진동수와 곡선부재 높이와의 관계 및 고유진동수와 세장비와의 관계를 그림에 나타내었다. 또한 진동형의 예를 그림에 나타내었다.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.1200-1208
• /
• 2016

Planar electromagnetic interference (EMI) filter has significant engineering significance to power electronic system integration and miniaturization. However, the value of differential mode capacitance cannot meet the demand of noise suppression because of the size limit of ceramics. In this case, the EMI filter of novel multilayers is recommended to address this issue. A novel integrated structure of EMI filter based on multilayer ceramic is proposed in this study. The inductance and capacitance of the new structure can be designed separately, which is an advantage in manufacturing. Insertion loss is measured more closely to the actual situation in this study, which is different from the condition where source and load impedances are both 50 Ω. In the process of designing a novel EMI filter, noise impedance is considered. Moreover, the prototype is created and applied to a small switching power supply, which verifies the effectiveness of the developed EMI filter.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.28-34
• /
• 2015

By incorporating a 966nm near infrared laser, we demonstrated bidirectional current triggering of between 0 and 10mA in a two-terminal planar device based on a highly resistive vanadium dioxide ($VO_2$) thin film grown by a pulsed laser deposition method. A two-terminal planar device, which had an electrode separation of $100{\mu}m$ and a $50{\mu}m-wide$ $VO_2$ conducting layer, was fabricated through ion beam-assisted milling and photolithographic techniques. A bias voltage range for stable bidirectional current triggering was determined by investigating the current-voltage curves of the $VO_2-based$ device in a current-controlled mode. Bidirectional current triggering of up to 10mA was realized by directly illuminating the $VO_2$ film with a focused infrared laser beam, and the transient responses of triggered currents were analyzed when the laser was modulated at various pulse widths and repetition rates. A switching contrast between off- and on-state currents was evaluated as ~3571, and the rising and falling times were measured as ~40 and ~20ms, respectively.