• 말소리와 음성과학
• /
• 제8권4호
• /
• pp.49-61
• /
• 2016

The present study investigates the perception of Korean phonation types by native speakers of Aymara. Perception tests were conducted on two sets of Korean speech materials to determine correspondence between Korean and Aymara 3-way contrasts and to find out which of the consonantal and vocalic part of the syllable is more influential in the perception of Korean phonation types. A set of manipulated stimuli, as well as a set of 12 spontaneous words, were prepared for the tests. The first syllable of the 12 Korean bisyllabic words of 3 series of phonation types(Lenis, Aspirated, and Fortis) in 4 places of articulation were split into consonantal and vocalic parts. And then the two parts were combined to form 9 tokens of CV sequences respectively for each place of articulation. Native speakers of Aymara were forced to match Korean stimuli with one of the 15 Aymara words which represent 3 series of consonant types(plain, aspirated, and ejective) in 5 places of articulation(bilabial, alveolar, palatal, velar, and uvular). Results showed that the consonantal part is more influential than the vocalic part to the Aymara subjects' perception of Korean phonation types when the consonantal part is Aspirated in its phonation type, but the vocalic part is more influential than the consonantal part when the consonantal part is Lenis or Fortis in its phonation type. Response analysis showed that Aymara subjects tend to match Korean stops to Aymara ones in such a way that Lenis corresponds to aspirated, Aspirated to aspirated, and Fortis to plain.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.176-183
• /
• 2013

본 논문에서는 회전을 통해 입력되는 연속 프레임 단위의 평면지문을 효과적으로 정합하여 보다 많은 지문의 특징점 정보를 취득함으로써, 지문 인식율을 높일 수 있는 회전지문 정합 알고리즘을 제안한다. 본 논문에서 제안한 가변 투영마스크를 이용한 회전지문 정합 알고리즘은 배경과 평면지문을 분리하는 검출부와 검출된 영상을 순차적으로 투영할 수 있는 투영 마스크 생성부를 갖는다. 또한 정합부에서는 생성된 가변 투영마스크를 중심영상부터 피라미드 형태의 투영법을 이용하여 정합된 회전지문을 취득하였다. 모의실험 결과 평면지문에서 추출되는 특징점수 평균 46.79%, 매칭을 위한 좋은 정보를 포함한 GOOD특징점의 개수는 52.0% 많이 검출됨을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1359-1364
• /
• 2004

An experiment was performed to study the evaporation heat transfer and the pressure drop characteristics of liquid nitrogen in a horizontal stainless steel tube with wire coil inserts. The inner diameter of test tube is 4.3mm and the length is 1.5m. Four wire coils having different pitch and thickness were inserted into the plain test tube. The wire coil length is 1.5m and the diameter is 3.65mm with thickness of 0.5mm and 0.9mm. Experiments were conducted at saturation temperature of $-191^{\circ}C$ mass flux from 200 to 370 $kg/m^{2}s$ and heat flux of 62 $kW/m^{2}$. Direct heating method was used to apply heat to the test section. Boiling heat transfer coefficients of both the plain and the enhanced tubes were calculated. Pressure drops between inlet and outlet side of test section were also measured, and they are used to estimate EPR(Enhancement Performance Ratio).

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1264-1274
• /
• 1994

Heat transfer performance of integral-fin tube which is used in recipro turbo refrigerator or high compact heat exchangers is studied. Eight tubes with trapezoidal shaped integral-fins having fin densities from 748 to 1654 fpm and 10, 30 internal grooves are tested. A plain tube having the same(inner and outer) diameter as the fin tubes is also tested for comparison. Pool boiling heat transfer of R-11 is investigated experimentally and theoretically on single tube arrangement. The refrigerant evaporates at saturation state of 1 bar on the outside tube surface and heat is supplied by not water which circulates inside of the tube. From the result of eight fin tubes and one plain tube tested, a tube having 1299 fpm-30 grooves shows the best performance. A maximum overall heat transfer coefficient of this tube is about 4000 $W/m^{2}K$ at 2.8m/s of water velocity. The maximum heat transfer enhancement (i.e., the ratio of overall heat transfer coefficients of finned to plain tubes)is about 2.1.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.47-56
• /
• 2015

At the present, the mechanized form roads pavement was constructed with plain concrete. Mostly, it was used by welded wire mesh for preventing crack. Cellulose fibers for the reinforcement of concrete offer relatively high levels of elastic modulus, fiber count (per unit weight), specific surface, and bond strength to cement-based materials. The construction of concrete pavement confirmed that cellulose fiber reinforced concrete was applicable to mechanized form roads pavement. In the study, cellulose fibers were used here at 0.08 % volume fraction, which is equivalent to a fiber content of $1.2kg/m^3$. Cellulose fiber reinforced concrete were compared with plain concrete. Field test results indicated that cellulose fiber reinforced concrete showed slightly to increase of 28 days compressive strength and improved the initial strength. it tended to increase of splitting tensile strength. Test results showed that the slump and air content tend to decreased. but, the variation of air contends is very little. Also, construction cost of cellulose fiber reinforced concrete is less than about 25.7 % the case of welded wire mesh previously used. Therefore, The cost reduction is expected to be possible in construction site by mechanized form roads pavement.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.139-145
• /
• 2007

Fretting is a kind of surface damage mechanism observed in mechanically jointed components and structures. The initial crack under fretting damage occurs at lower stress amplitude and lower cycles of cyclic loading than that under plain fatigue condition. This can be observed in automobile and railway vehicle, fossil and nuclear power plant, aircraft etc. In the present study, railway axle material RSA1 used for evaluation of fretting fatigue life. Plain and fretting fatigue tests were carried out using rotary bending fatigue tester with proving ring and bridge type contact pad. Through these experiments, it is found that the fretting fatigue limit decreased about 37% compared to the plain fatigue limit. In fretting fatigue, the wear debris is observed on the contact surface, and oblique cracks at an earlier stage are initiated in contact area. These results can be used as useful data in a structural integrity evaluation of railway axle.

• 한국생활과학회지
• /
• 제11권4호
• /
• pp.381-389
• /
• 2002

This research was designed to investigate the preference to textiles for slacks of college students. 105 subjects majored in fashion design were surveyed. Subjects selected three favorite materials among 120 samples presented in swatch book and weighted frequency and percentage were added by order. The extent of preference was compared by season and sex. The results of this study were as follows: 1. College students preferred twill cotton Drill foremost as a textile for spring and fall season. 2. Plain linen Crash was the most preferred material for summer. 3. Cotton Corduroy was the most preferred textile for winter. 4. In thickness and weight, textiles for winter were thicker and heavier than those of other seasons. 5. In fiber content, natural fiber such as wool were preferred for all seasons. 6. In weave of textiles, twill weave fabric was preferred for spring fall and winter season, and plain weave for summer. 7. College students preferred plain texture materials foremost and navy blue and black color was preferred for textiles for slacks. 8. Girl students preferred cotton fabrics and boys preferred wool fabric for slacks. Also, girls generally preferred thinner fabrics than those of boys.

• Journal of Yeungnam Medical Science
• /
• 제5권1호
• /
• pp.43-48
• /
• 1988

골절의 모양, 범위 및 골편의 해리의 정도를 C.T.로서 잘 결정할 수 있었다. 고관절을 비롯한 기타 골반골의 골절과 연부 조직손상 정도를 잘 알 수 있었다. 고식적인 단순 Z-선 촬영으로 발견이 안 되었던 고관절내 골편의 유 무를 잘 관찰할 수 있었다. 골반골 골절이 있는 움직이기 어려운 환자에서 검사가 쉽고, 용이하게 이루어질 수 있었다. 수술후 관절강내 골편이나 개방성복술에 대한 평가를 잘 할 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제30권12호
• /
• pp.1417-1421
• /
• 2001

Objective : The purposes of this study are to compare imaging features with operative findings and to determine significance of imaging studies for early detection of craniosynostosis(CS). Methods : Plain radiograph of skull and three-dimensional(3D) CT reconstruction were analyzed in 10 consecutive patients with CS to assess the presence and the extent of synostosis. The radiological findings were investigated and compared with operative findings. Results : The locations of lesion were coronal suture in 6, sagittal suture in 3 and multiple sutures in one patient, and the age ranged 1 to 53 months(mean age : 17.4 months). Reconstructive procedures with or without advancement of supraorbital rim were performed in coronal CS patients and ${\pi}$-procedures or synostectomy were done in sagittal CS patients. Radi-ological abnormalities such as sutural indistinctness or sclerosis, bony ridge, bossing and other bony deformities were nearly consistent with surgical findings. Conclusion : The interpretation of imaging study are very important for early detection of craniosynostosis, especially, the plain radiographs of skull. Also 3D CT imaging is helpful in diagnosis and surgical planing of craniosynostosis. There are no significant differences between imaging features and operative findings in CS patients.

• Computers and Concrete
• /
• 제8권3호
• /
• pp.343-355
• /
• 2011

This paper presented the model to predict the chloride diffusion coefficient in tension zone of plain concrete under flexural cyclic load. The fictitious crack based analytical model was used together with the stress degradation law in cracked zone to predict crack growth of plain concrete beams under flexural cyclic load. Then, under cyclic load, the chloride diffusion, in the steady state and one dimensional regime, through the tension zone of the plain concrete beam, in which microcracks were formed by a large number of cycles, was simulated with assumptions of continuously straight crack and uniform-size crack. The numerical analysis in terms of the chloride diffusion coefficient, $D_{tot}$, normalized $D_{tot}$, crack width and crack length was issued as a function of the load cycle, N, and load level, SR. The nonlinear model as regarding with the chloride diffusion coefficient in tension zone and the load level was proposed. According to this model, the chloride diffusion increases with increasing load level. The predictions using model fit well with experimental data when we adopted suitable crack density and tortuosity parameter.