• Journal of the Korean Wood Science and Technology
• /
• v.11 no.3
• /
• pp.14-22
• /
• 1983

The purpose of this study was to evaluate the effect of short-term paraquat treatment without insecticides on the enhancement in oleoresin of pitch pine (Pinus rigida M.) at various distances from the wound height. The trees were treated with 0.5, 2 and 4% paraquat solutions using the bore-hole technique. Duplicate cores from treated and untreated sides of treated trees were made at 5 height levels (-0.3, 0.0, 0.3, 0.9 and 1.5 m above the wound height) at 3 months after treatment. The alcohol-benzene extractives based on unextracted oven-dry cores were taken as oleoresin contents. The results were as follows: 1. The effect of oleoresin enhancement at wound height were not affected by paraquat concentration. 2. Ascending distance of the enhancing effects above the wound height was directly related to paraquat concentration. Only in 4% paraquat treated trees, the effect extended to 1.5 m above the wound height. 3. As a result of examining descending distance of the enhancing effects at 0.3 m below the wound height, the effects extended to there in 4% and 2% paraquat treated trees.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.53-68
• /
• 1990

This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.165-169
• /
• 2010

Fusarium circinatum is the causal agent of the pine disease commonly referred to as pitch canker. In this study, F. circinatum was isolated from the diseased Pinus rigida in the golf courses, Korea. The morphological characteristics and the molecular features of the isolates were investigated to identify the pathogen. Histone H3 gene and IGS rDNA region was analyzed and consequently the isolates identified as F. circinatum. All of them have the same sequences and the mating type was determined as MAT1-1. The inhibitory effect of the methanol extracts from the disease resistant pine species, Pinus koraiensis and Pinus densiflora and a susceptible species, P. rigida were evaluated against the isolate, F. circinatum. As a result, the extracts of P. koraiensis and P. densiflora showed higher antifungal activity than that of the susceptible, P. rigida.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.394-401
• /
• 2010

Resin flow, symptom development, and lignin biosynthesis in response to wounding and fungal inoculation were investigated in Pinus rigida and Pinus densiflora. The two-year-old seedling stems were subjected to three types of treatments: (i) wounding without inoculation, (ii) wound-inoculation with a conidial suspension of Fusarium circinatum, and (iii) pre-wounding woundinoculation with the fungus 20 days after the initial wounding. Resin flow from wounding sites was more evident in P. rigida than P. densiflora in all treatments. The wound-inoculation with the fungus induced almost two-fold higher levels of resin flow than the other treatments in both species. The pre-wounding woundinoculation appeared to result in a decrease in pitch canker development in the two pine species. Some reductions in disease severity were observed in the prewounding wound-inoculated P. rigida, showing a mean disease severity of less than 85%, compared with approximately 100% in the wound-inoculated stems. Disease severity was approximately 50% in the woundinoculated P. densiflora, whereas 10% in the pre-wounding wound-inoculated stems. Higher amounts of lignin were found from bark (ca. 40%) than from xylem (ca. 30%). The wound-inoculated bark and the pre-wounding wound-inoculated bark exhibited higher amounts of lignin among the other treatments. These results suggest that the wound-inoculation apparently prompt the increase in resin flow and lignin biosynthesis from the two pine species, and the prior wounding may be involved in decreased disease severity against the further invasion of F. circinatum.

• Journal of Korean Society of Forest Science
• /
• v.78 no.4
• /
• pp.401-411
• /
• 1989

The embryos of Pinus taeda, P. rigida, and P. taeda ${\times}$ rigida were cultured for adventitious shoot regeneration in vitro. Culture media were modified from Gresshoff and Doy (MGD), Murashige and Skoog (MMS), Lloyd and McCown (MLM), and Schenk and Hildebrandt (MSH). NAA was added to initiation media at a concentration of 0.1 or 0.01 mg/l. BAP was used at the concentrations of 0.1. 0.5, 1, 2, or 5mg/l. Each explant was induced for 3-4 weeks on solid medium. All explants were cultured up to 16 weeks. Illumination was about $1506{\pm}540lux$ at the level of the tissues in the growth room with a temperature of $25{\pm}2^{\circ}C$. A 16-hour photoperiod per 24 hours was used. Half-strength medium was used for all the subcultures. For shoot production by loblolly pine, MMS, MLM, or MSH is preferred with 5 mg/l BAP with either 0.1 or 0.01 mg/l NAA. For shoot production by pitch pine, MMS, MLM, or MSH is recommended with 2 or 5 mg/l BAP with 0.1 mg/l NAA. For shoot production by the hybrid pine, MMS or MLM is more effective with 1, 2 or 5 mg/l BAP with 0.1 mg/l NAA. There were no differences recognized among the species tried in the patterns of bud formation and shoot development. Different composition of media, in major and minor salts or possibly in vitamins, should be tested for the two developmental stages of adventitious shoots ; the induction of shoot buds and the elongation of them into shoots.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.44-48
• /
• 2003

Flexural properties were investigated on clear specimens made from small diameter thinned trees of pitch pine (Pinus rigida Mill.), Japanese red pine (Pinus densiflora Sieb. et Zucc), Japanese larch (Larix kaempferi Carr.), and sawtooth oak (Quercus acutissima Carr.). MOR and MOE values of small clear specimen were depended on the species. The highest density of sawtooth oak shows the highest values of MOR and MOE. However, the lowest density of Japanese larch shows the lowest values of MOR. It was also shown that flexural properties could be predicted by stress wave MOE, since the correlations between stress wave MOE and flexural properties were relatively good.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.3
• /
• pp.104-108
• /
• 2002

Nail withdrawal tests were conducted on clear wood of domestic small diameter logs. Nails were driven into the cross and longitudinal sections of each specimen, then nail withdrawal tests were performed. Nail withdrawal loads are strongly dependent on the direction of nail positions. The average load values for the nail withdrawal both in cross section and longitudinal section are higher in high specific gravity (SG) wood of sawtooth oak (Quercus acutissima Carr.) than those in low SG wood of Korean red pine (Pinus densiflora Sieb. et Zucc.) and pitch pine (Pinus rigida Mill.). The average ratio of the nail withdrawal loads for side-grain and end-grain are higher in the low SG wood than that in the high SG of wood. Both linear and non-linear regression analyses were conducted on nail withdrawal load with SG, good correlations were obtained between nail withdrawal load and SG.

• Journal of the Korea Furniture Society
• /
• v.26 no.3
• /
• pp.222-228
• /
• 2015

To evaluate the natural decay durability of valuable domestic softwoods which are used for preservative treatment in our country, we carried out decay test by European standard method. Of all test wood species, Japanese larch (Larix leptolepis) showed slightly high natural decay durability compared to other 4 wood species, Japanese red pine (Pinus densiflora), pitch pine (Pinus rigida), Japanese cedar (Cryptomeria japonica), and scots pine (Pinus sylvestris). However, all of evaluated domestic softwood species in this study caused high weight losses over about 30% in heartwood by test fungus, Poria placenta. We can hardly expect a good natural decay durability from these softwood species. According to the classification of the natural durability of European standard (EN 350-1), they are classified into "Not durable" or "Slightly durable". Therefore, if using these softwoods as exterior materials, we must do preservative treatment to ensure durability.