• Advances in materials Research
• /
• v.4 no.4
• /
• pp.215-226
• /
• 2015

Experiment on roughness and micro pit defects of SUS 430 ferrite stainless steel was investigated in laboratory. The relation between roughness and glossiness with reduction in height, roll surface roughness, emulsion parameters was analyzed. The surface morphology of micro pit defects was observed by SEM, and the effects of micro pit defects on rolling reduction, roll surface roughness, emulsion parameters, lubrication oil in deformation zone and work roll diameter were discussed. With the increasing of reduction ratio strip surface roughness Ra(s), Rp(s) and Rv(s) were decreasing along rolling and width direction, the drop value in rolling direction was faster than that in width direction. The roughness and glossiness were obtained under emulsion concentration 3% and 6%, temperature $55^{\circ}C$ and $63^{\circ}C$, roll surface roughness $Ra(r)=0.5{\mu}m$, $Ra(r)=0.7{\mu}m$ and $Ra(r)=1.0{\mu}m$. The glossiness was declined rapidly when the micro defects ratio was above 23%. With the pass number increasing, the micro pit defects were reduced, uneven peak was decreased and gently along rolling direction. The micro pit defects were increased with the roll surface roughness increase. The defects ratio was declined with larger gradient at pass number 1 to 3, but gentle slope at pass number 4 to 5. When work roll diameter was small, bite angle was increasing, lubrication oil in micro pit of deformation zone was decreased, micro defects were decreased, and glossiness value on the surface of strip was increased.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.346-355
• /
• 2014

Confocal reflection microscopy (CRM) was utilized to create 3-dimensional images of bordered pits and cell wall in the tracheid of Korean red pine (Pinus densiflora). Ultrastructures of torus, margo, and pit border were clearly observable in the CRM micrograph. Micrograph of cross-field pit revealed the connecting and supporting structure between tracheid and ray parenchyma cell. The CRM micrographs enabled to investigate detailed structures of tracheid cell wall such as S1, S2, S3 layers, transition layers between these layers, and microfibril (MF) orientation in S3 and S2 layers as well as complicated distribution of MF orientation around bordered pits. Not only concentric MF orientation of border thickening in the pit border was observed, but also changes in MF orientation from the cell wall to the border. From the experimental results, the CRM was thought to be a versatile microtechnique to investigate detailed structures of cell wall and bordered pit in the tracheid and cross-field pit between tracheid and ray parenchyma cell.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1531-1537
• /
• 2021

The quality of the game can be evaluated by its fun and functional stability. Among them, the quality area for fun is the essence of the game, so it is a very important factor to be considered from the point of view of a game designer. Usually, fun games with high originality and immersion are designed in the early stages of development, such as idea generation and concept setting. At this time, making it possible to verify the fun factor of the game has an important influence on the success of the game. In this study, the case of using PIT technique when teaching fun element design to students who are starting to study game design was introduced and the effect was analyzed. It is expected that the PIT technique will be used more actively in the game design education field for high-quality and fun game design.

• Tunnel and Underground Space
• /
• v.34 no.1
• /
• pp.54-70
• /
• 2024

Utilization of completed open-pit for mining waste disposal is an alternative method of tailing storage facility (TSF), which can minimize the area and cost required for the installation of TSF. However, long-term tailing disposal into open-pit has a potential risk of reducing mechanical stability of surrounding rock mass by acting as an additional load. In this research, a realistic open-pit tailing disposal scenario of 60,400 hours was established based on the case of Marymia gold mine, Australia. Mechanical stability of surface pillar between open-pit and underground stope was analyzed numerically by using Sigma/W, under different stope geometry and rock mass conditions. Simulation results showed that long-term tailing disposal into open-pit can significantly increase the failure probability of surface piller. This result suggests that mechanical stability of mine geometry should be conducted beforehand of open-pit tailing disposal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1385-1386
• /
• 2010

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.29-36
• /
• 2006

Juvenile and matured wood of Populus tomentiglandulosa species of Salicaceae native grown in Korea was observed by FE-SEM and optical microscope. Species is characterized by mostly diffuse-porous, simple perforation plates, polygonal alternate non-vestured intervessel pit, medium length of vessel elements and fibres, non-septate very thin walled libriform fibres and exclusively uniseriate procumbent rays. Axial parenchyma was absent or extremely rare. Vessel and fibre length were longer in both matured and juvenile latewood than those of earlywood. Ray cell lumen diameter, ray length, number and diameter of endwall pit in ray cell, endwall pit, number and diameter of pit in lateral wall of one ray parenchyma cell, vessel ray pit number and diameter vary from juvenile early and latewood to matured wood.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.73-80
• /
• 2004

This study was conducted to determine the effect of several kinds of calcium foliar application and drip irrigation on the bitter pit incidence of apple. CaCl₂, inorganic calcium compound, was the most effective in increasing the calcium concentration in the fruit flesh, and reducing bitter pit incidence. Calcium spray in the later part of the growing season was more effective than in the earlier part. Drip irrigation applied during the dry spells increased calcium concentration in the fruit flesh, and reduced bitter pit incidence.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.2
• /
• pp.16-21
• /
• 2017

In this study, the flow effect of warming and cooling in the air supply of a pit for air conditioning were evaluated in BS art museum. We simulated the flow temperature for a pit winter and summer seasons using computational fluid dynamics. Consequential, energy saving, energy saving costs and initial payback periods were calculated and the following conclusions were drawn. The warming effect of the winter increased by $18.1^{\circ}C$ and $0.2^{\circ}C/m$ and the cooling effect of the summer decreased by $6.1^{\circ}C$ and dropped to $0.07^{\circ}C/m$. Energy saving appeared to be 19.1 kW in the summer and 54.3 kW in winter. Energy saving costs ranged from 2,567,119 won/year to 5,134,238 won/year and at minimum, initial payback period for initial investment was 3.9 years. As a result, the air supply system using an existing pit without any burden on initial investment costs is believed to contribute to energy saving through warming and cooling of unutilized energy effects.

• Journal of Environmental Science International
• /
• v.23 no.8
• /
• pp.1495-1505
• /
• 2014

The objective of this study was to evaluate survival rate and fish movement (migration) using a tagging approach of passive integrated transponder (PIT) in Juksan Weir, which was constructed as a four major river restoration projects. For this study, survival rates of each fish species and the mobility of fish individuals were analyzed during 2 weeks by the insertion of PIT tags to various fish species in the laboratory. According to tagging tests in the laboratory, the survival rate 37.5% (30 survivals of 80 individuals) after the insertion of PIT tags. The survival rate of Carassius auratus and Hemibarbus labeo was 100% and 80% after the insertion of the tags, respectively, whereas it was only 13.3% for Zacco platypus. In the field experiments of Juksan Weir, 6 species and 157 individuals from 8 species (563 individuals) were detected in the fixed automatic data-logging system, indicating a detection rate of 27.9% in the fishway of Juksan Weir. In the meantime, some species with no or low detection rates in the fixed automatic data-logging system were turn out to be stagnant-type species, which prefer stagnant or standing water to live.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.217-225
• /
• 1999

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.