• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.270-276
• /
• 2018

This paper presents a low area 256-point pipelined FFT architecture, especially for IEEE 802.16a WiMAX systems. Radix-24 algorithm and single-path delay feedback (SDF) architecture are adopted in the design to reduce the complexity of twiddle factor multiplication. A new cascade canonical signed digit (CSD) complex multipliers are proposed for twiddle factor multiplication, which has lower area and less power consumption than conventional complex multipliers composed of 4 multipliers and 2 adders. Also, the proposed cascade CSD multipliers can remove look-up table for storing coefficient of twiddle factors. In hardware implementation with Cyclone 10LP FPGA, it is shown that the proposed FFT design method achieves about 62% reduction in gate count and 64% memory reduction compared with the previous schemes.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.575-578
• /
• 1998

In this paper, we propose a VLSI architecture of Reed-Solomon decoder. Our goal is the development of an architecture featuring parallel and pipelined processing to improve the speed and low power design. To achieve the this goal, we analyze the RS decoding algorithm to be used parallel and pipelined processing efficiently, and modified the Euclid's algorithm arithmetic part to apply the parallel structure in RS decoder. The overall RS decoder are compared to Shao's, and we show the 10% area efficiency than Shao's time domain decoder and three times faster, in addition, we approve the proposed RS decoders with Altera FPGA Flex 10K-50, and Implemeted with LG 0.6{\mu}$ processing.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.9
• /
• pp.10-21
• /
• 1997

In this paper, we propose multiple instruction issuable multi-streaming as a processor architecture for 3D graphics processor. Multistreaming can eliminate inteferences within concurrently executing instructions inthe pipelined processor to allow enough parallelism for parallel processing. Through cycle level simulation study, we show that the proposed architecture outperforms a conventional RISC processor, MIPS R3000 by three times with reasonable resource overheads. Multiple instruction issuable multistreaming processor will be a bood architecture for instruction processor when a large number of threads are guaranteed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.313-325
• /
• 1996

This paper presents a new architecture for full-search block-matching motion estimation. The architecture is based on linear systolic arrays. High speed operation is obtained by feeding reference data, search data, and control signals into the linear systolic array in a pipelined fashion. Input data are fed into the linear systolic array at a half of the processor speed, reducing the required data bandwidth to half. The proposed architecture has a good scalability with respect to the number of processors and input bandwidth when the size of reference block and search range change.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.39-47
• /
• 1998

This paper describes high-speed pipelined memory architecture for a shared buffer ATM switch. The memory architecture provides high speed and scalability. It eliminates the restriction of memory cycle time in a shared buffer ATM switch. It provides versatile performance in a shared buffer ATM switch using its scalability. It consists of a 2-D array configuration of small memory banks. Increasing the array configuration enlarges the entire memory capacity. Maximum cycle time of the designed pipelined memory is 4 ns with 5 V V$\_$dd/ and 25$^{\circ}C$. It is embedded in the prototype chip of a shared scalable buffer ATM switch with 4 x 4 configuration of 4160-bit SRAM memory banks. It is integrated in 0.6 $\mu\textrm{m}$ 2-metal 1-poly CMOS technology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.301-308
• /
• 2007

This paper proposes high performance coprocessor architecture for real time dense disparity computation based on a phase-based binocular stereo matching technique called local weighted phase-correlation(LWPC). The algorithm combines the robustness of wavelet based phase difference methods and the basic control strategy of phase correlation methods, which consists of 4 stages. For parallel and efficient hardware implementation, the proposed architecture employs SIMD(Single Instruction Multiple Data Stream) architecture for each functional stage and all stages work on pipelined mode. Such that the newly devised pipelined linear array processor is optimized for the case of row-column image processing eliminating the need for transposed memory while preserving generality and high throughput. The proposed architecture is implemented with Xilinx HDL tool and the required hardware resources are calculated in terms of look up tables, flip flops, slices, and the amount of memory. The result shows the possibility that the proposed architecture can be integrated into one chip while maintaining the processing speed at video rate.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2023

Recently, demand for embedded systems requiring low power and high specifications has been increasing, and RISC-V processors are being widely applied. RISC-V, a RISC-based open instruction set architecture (ISA), has been developed and researched by UC Berkeley and other researchers since 2010. RV32I ISA is sufficient to support integer operations such as addition and subtraction instructions, but M-extension should be defined for multiplication and division instructions. This paper proposes an RV32I, RV32IM processor, and indicates benchmark performance scores compared to an existing processor. Additionally, A non-stalling method was proposed to support a 2-stage pipelined DSP multiplier to the 5-stage pipelined RV32IM processor. Proposed RV32I and RV32IM processors satisfied a maximum operating frequency of 50 MHz on Artix-7 FPGA. The performance of the proposed processors was verified using benchmark programs from Dhrystone and Coremark. As a result, the Coremark benchmark results of the proposed processor showed that it outperformed the existing RV32IM processor by 23.91%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1026-1031
• /
• 2008

Nowdays, homes and small businesses rely more and more PON(Passive Optical Networks) for financial transactions, private communications and even telemedicine. Thus, encryption for these data transactions is very essential due to the multicast nature of the PON In this parer, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features; 1) Composite field arithmetic SubByte, 2) efficient MixColumn transformation 3) and on-the-fly key-scheduling for fully pipelined architecture. By pipeling the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the on-the-fly key-scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• Journal of the military operations research society of Korea
• /
• v.14 no.1
• /
• pp.1-17
• /
• 1988

This paper presents a hardware accelerator for the maze routing problem. This accelerator consists of three 3 stage pipelines. Banked memory is used to avoid memory read/write conflicts and obtain maximum efficiency.