• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2006

The physical, mechanical and chemical properties of old and new Korean red pine (Pinus densiflora) were analyzed. The old woods were from dismantled timbers of Bonjungsa temple. The crystallized resin in the latewood was observed by microscopic analysis. Also, reduction of specific gravity, occurrence of microscopic cleavage of tracheid was observed in the old wood. The angle of microscopic cleavage of tracheid is estimated with the same angle of micro-fibril angle of 52 layer. The bending, compression and shear strength of old world were decreased about 35-27% than those of new wood. Dynamic modulus of elasticity measured by ultrasonic nondestructive test has the tendency of reducing by the time elapse of the wood usage. Therefore, deterioration of wood could be measured by reduction of specific gravity and dynamic MOE. The static MOE and mechanical properties of old wood could be predictable by measuring dynamic MOE in the longitudinal direction. Extractives of the old wood in 1-% NaOH solution are larger quantity than new wood. Therefore the decay of the wood could be evaluated by analyzing the chemical compound, especially 1-% NaOH solution. The results of this research could be used for understanding and prediction of the changing properties with elapsing time of wood.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.695-704
• /
• 2016

Physical and mechanical properties of Korean red pine wood grown in Anmyeon-do, Taean-gun, Chungcheongnam-do and Sogwang-ri, Uljin-gun, Gyeongsangbuk-do, Korea were measured and each relationships between them were analyzed. The ring width and latewood proportion along radial axis in Korean red pine at two-regions were measured by collecting the growth core of stands with age class V and IX. The ring width in Korean red pine at two-regions decreased with increasing cambium age. The average ring widths in age class V and IX in Anmyeon-do and Sogwang-ri were 2.865 mm, 1.705 mm, 4.764 mm, and 2.228 mm, respectively. The ring widths in Anmyeon-do were measured from 23% to 40% smaller than Sogwang-ri. The latewood proportion was negatively related with the ring width of Korean red pine at two-regions. The relationship between physical and mechanical properties of specimens for compressive and bending strength tests were analyzed with simple regression analysis. The relationship between latewood proportion and oven-dry density were positive and statistically significant. The relationship between latewood proportion and mechanical properties was slightly positive and not statistically significant, except the specimens for bending strength test of Anmyeon-do. The relationship between oven-dry density and mechanical properties was positive. It was just statistically significant in the specimens of Sogwang-ri. The compressive and bending strengths of Anmyeon-do and Sogwang-ri were 51.3 MPa, 80.5 MPa, 37.7 MPa, and 63.7 MPa, respectively. The strength difference between two-regions was determined to due to difference of ring width and latewood proportion by age class.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.299-305
• /
• 2010

Objective of this study is to examine whether pine wood nematode (PWN: Bursaphelenchus xylophilus) in the sawdust discharged from infected trees cause pine wood disease or not. For this, survival time of PWN in soil was examined in which soil moisture was controlled as 15%, 22.5%, and 30% in volume ratio, respectively. The pathogenicity tests were conducted under greenhouse and field conditions. Survival time of PWN in soil was about three days in the saturated (about soil moisture of 23% in volume ratio) and dark condition between 25 and $28^{\circ}C$ of room temperature. None of potted seedlings with non-wounded roots was infected by PWN in sawdust. In field, pine wood disease was not occur in any pine trees. These results indicated that PWN discharged on soil when the infected trees were cut by chain saw can not cause pine wood disease.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.105-112
• /
• 1987

Some anatomical characterisitcs of Japanese red pine (Pinus densiflora S. et Z.) collected from pollution-exposed areas in Korea were investigated. These sites were reportedly the most severe air polluted areas in Korean peninsular. A decline in overall growth rate was apparent since the late 10-year period of growth. P. densiflora in Onsan and in Yeochon recorded in the radial growth reduction of approximately 70 and 60% respectively. The formation of earlywood in the period of air pollution was restricted, whereas the percentage of latewood increased. The maximum wood density was lower in xylem rings formed during a period of air-pollution than in rings found without pollution. Most of pine trees damaged by air pollution showed the classical type of length-on-age curve for tracheids. However, reduction in cell wall-thickness and diameter was revealed in the wood exposed to air pollutants. Nor anomalies in microstructures nor microorganisms in wood structures were found in the damaged trees.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.3
• /
• pp.34-41
• /
• 1990

본 연구는 CCA로 방부(防腐)처리된 Lodgepole pine 각재(角材)의 재건조(再乾燥)시 고온건조법(高溫乾燥法)의 적용이 건조속도(乾燥速度) 및 건조결함(乾燥缺陷)의 발생에 어떻게 영향하는가를 고찰하고자 수행되었다. 고온건조시 건조속도는 통당(通常) 열기건조(熱氣乾燥)시보다 약(約) 2.5배 증가되었으며, 방부처리재의 재건조 속도는 처리전(前)의 전건조속도보다 약간 감소됨을 보였다. 표면할열(表面割裂)의 발생정도(程度)은 전건조시의 경우, 고온건조시 보다 심(甚)하였으나 재건조시에는 건조방법간에 큰 차이가 없었다. 방부제의 침투(浸透)를 도모(圖謀)하기 위하여 자상(自傷)처리(Incising)된 각재의 경우에는 재건조시 절개부(切開部)의 연장(延長)에 의해 할렬의 정도가 증가됨을 보였다. 뒤틀림(Warping)의 발생정도는 고온건조시가 통상 열기건조에 비해 심하지 않았으며, 전(全) 건조과정을 통하여 발생된 뒤틀림은 WWPA가 정(定)해놓은 Lodgepole pine 2등급(等級)(No. 2 grade)의 뒤틀림 허용치(許容値)의 범위내(範圍內)에 있음을 보였다. 결론적(結論的)으로, 고온건조시 증가되는 건조속도와 건조재의 질(質)에 큰 영향을 주지않는 범위내에서 발생되는 건조결함을 고려할 때, Lodgepole pine의 전건조및 CCA 처리후 재건조를 위해 큰 문제없이 고온건조법이 적용될 수 있음을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• v.4 no.1
• /
• pp.48-53
• /
• 1976

This Study was carried out to investigate the course of air-drying and drying defects of red pine (Pinus densiflora S. et Z.) and Italian poplar (Populus eurameriana I-476) boards 1,2 and 3cm thick in the flat pile. The results are as follows. 1. Air-drying curves for red pine and Italian poplar boards were same as figure 1 and 2. These moisture contents were lower in July and August during seasoning periods. 2. Air drying time of red pine board required to dry 15 percent moisture content in one week for 1 cm board, five weeks for 2 cm board and six weeks for 3cm board respectively. In case of Italian poplar boards, in one week for 1 cm board, four weeks for 2 cm and five weeks for 3 cm board. The thickness of board influenced the time for air drying. 3. Drying defects such as checking, warping and staining happened badly in pine than in Italian poplar boards. Especially, checking was severe in thicker board and warping in thinner board.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.13-20
• /
• 2005

This paper deals with flexural vibration techniques as a means of predicting bending strength properties for quarter-sawn and flat-sawn planes of red pine containing knots. Dynamic modulus of elasticity $(MOE_d)$ was calculated from resonance frequency obtained from the flexural vibration induced by a magnetic driver in quarter-sawn and flat-sawn planes of red pine containing knots. The dynamic MOE were well correlated to bending strength properties. Their correlation coefficients ranged from 0.866 to 0.800 for the regression between dynamic MOE and static bending MOE or MOR. The difference of the values between quarter-sawn and flat-sawn was very small. These values were higher than correlation between percentage of total knot diameter to total width of red pine specimen $(K_T(%))$ as well as $K_O(%)$ base upon ASTM D 3737 and static bending strength properties (correlation coefficient r = 0.448~0.704), and were similar to those between static bending MOE and bending MOR (r = 0.850). These results indicate that dynamic MOE obtained from resonance frequency induced by flexural vibration of magnetic driver is able to effectively use for predicting of static bending strength of red pine containing knots as well as static MOE.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.11-16
• /
• 1996

The purpose of this paper is to present a summary of assignment design values according to domestic softwood structural lumber grading rules. Allowable stresses for visually graded lumber were determined from basic data on small. clear specimens. The data corrected for variability such as natural defects and other factors. The procedure adopted by Japan was used for assigning allowable design values. Strength ratios in relation to each defect were taken from ASTM D 245-81. Korean pine(Pinus koraiensis S. et Z.), Korean red pine(Pinus densiflora S. et Z.), Japanese larch(Larix leptolepis Gordon) and Needle fir(Abies holophylla Max) were applied to this study. The calculated allowable stresses were same in Korean pine and Korean red pine. These values were highest in Japanese larch lowest in Needle fir. So, it is desirable for these species to be classified into different catagories Species Group. However, accurate comparison in design values on lumber grading rules among U.S., Japan and Korea was somewhat difficult. And full scale testing will be necessary for accurate determination of the correction factors to setting up design values.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.