• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.59-64
• /
• 2006

In this paper, developed a uninterruptible hotline tools and method for replacement of strain pole crossarm on overhead distribution line. For practical use of developed tools, following direct hot-line methods were proposed: 'Direct hot-line method for replacement of pin pole crossarm', 'Direct hot-line method for alteration of crossarm' and 'Crossarm replacement method in uninterruptible cable displacement area'. These methods were proposed more simple and safe working on hotline job.

• 임상간호연구
• /
• 제14권1호
• /
• pp.113-123
• /
• 2008

Purpose: This study was done to provide support material to traditional nursing interventions through investigation of the effect of Auricular acupressure therapy for female staff in the hospital who have dysmenorrhea but cannot be absent from work even with severe symptoms affecting their work and therefore cannot get proper pain management. Method: The participants in this study were 62 women were working in the G-university hospital in Jin-ju, assigned to experimental (30) and 32 control groups (32). The study method was a quasi-experimental, nonequivalent control group non-synchronized design. The experimental group received acupressure treatment (a pin was attached to tape) on the special stimulation points in the inside of the ear, 5 times for 5 seconds, morning, afternoon, and night. Tape without the pressure pin was applied to the same points for women in the control group to evaluate placebo effect. Data were collected from May to November 2007 and were analyzed using SPSS PC+ 12 version. Descriptive statistics, t-test, $x^2-test$, Fisher's exact test, paired t-test, were used to analyze the data. Results: The experimental group showed a significant decrease in dysmenorrhea compared to the control group (t=-2.743, p<.01). In the sub-part, the experimental group showed menstruation related pain (t=-3.726, p<.01), menstruation related to behavioral change (t=-2.421, p<.05) and symptoms however, there was no significant difference related to attention deficit, water retention, and negative image. Conclusion: Application of auricular acupressure therapy was approved for this study and although auricular acupressure therapy was not effective for all of the symptoms, it was effective for dysmenorrhea.

• 구강회복응용과학지
• /
• 제34권4호
• /
• pp.317-323
• /
• 2018

구강암이 상악에 발생하게 되면 원발 부위의 제거를 포함한 외과적 처치 후 비구강 개통(oro-nasal communication)이 발생하게 된다. 비구강 개통으로 인한 음식물의 저류를 막고 및 원할한 발음 및 심미적 회복을 위해서는 구강 폐색장치(Obturator)를 통한 수복이 필요하다.본 증례에서는 구강암으로 인해 우측 상악 편측절제술(hemi-maxillectomy) 시행하고 두경부 방사선 치료의 영향으로 인해 잔존 지대치의 우식과 불량한 치주지지를 보이는 환자에서 구강폐색장치(obturator)를 하이브리드형 이중관의치(hybrid telescopic double crown denture)로 수복하였다. 18개월 간 경과관찰에서 성공적인 예후를 보여 이를 보고하고자 한다.

• Structural Engineering and Mechanics
• /
• 제44권2호
• /
• pp.239-255
• /
• 2012

This work presents a contribution to understand the inverted trussed beams behavior. The system has a main beam and struts with rectangular cross section associated to a wire rope enlaced to the main beam. It is an unpublished system with the advantage of easy positioning of the wire rope, once it is a continuous and connected by turnbuckles. It is a system that can be used as support for concrete formworks or for rehabilitation wooden beams proposal. The enlacement of the cable demands a small notch at the top of the cross section and a cross pin at the bottom. Six inverted trussed beams were tested, with spans of 180 cm with cables diameter of 1/4". Additionally, four simple beams without any external steel cable were also tested with material from the same lot of wood, allowing a comparison in rupture. The results showed capacity gain of around 60% compared to a simple beam. Once the wire rope characteristics and anchoring are very important for structure response, some improvement suggestions for the efficiency of the cables are also presented.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.160-165
• /
• 2005

The proceeding bearings of marine diesel engine are affected by dynamic loads from the cylinder gas pressure and the inertia force from the crank mechanism. Oil film must support the load of the shaft and it also must protect the proceeding and the bearings from damage. This study uses Goenka's new curve fit to carry out the theoretical analysis of oil film in proceeding bearings for MAN B&W 12K90MC-C and Hyundai Heavy Industry Co., Ltd HiMSEN H21/32 Engine. The applied engine's analysis results show the behavior of the proceedings in main and crank pin bearings. The results of this study will be the proper criteria for the proceeding bearings design and be available for development of the new technology in the proceeding bearing and for the high strength lining coating.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.8-13
• /
• 2021

Excavators are construction machines used for digging soil, transporting soil, dismantling buildings and clearing the ground at construction sites. There are various attachments attached to the arm end of the excavator and used for various operations. There are the most common types of buckets attached for excavation and other types of attachments used for foresting, road cleaning, snow removal, and waste disposal. When multiple types of work are done at the same time, several attachments must be replaced and a device called a quick coupler is used to reduce replacement time. Although a quick coupler reduces the replacement time of the Attachment, it is necessary to attach safety devices to prevent unintentional detachment of attached attachments during the operation. To prevent the attachment from leaving or falling regardless of the operator's intention, support is installed in the hook of the bucket pin and controlled through a separate hydraulic cylinder to ensure safety. When attaching an attachment, it shall be attached without any action. This study is intended to verify the design validity of safety devices to prevent falls of attachments occurring at construction sites.

• Advances in Computational Design
• /
• 제7권3호
• /
• pp.189-210
• /
• 2022

Deployable structures have the ability to shift from a compact state to an expanded functional configuration. By extension, reconfigurability is another function that relies on embedded computation and actuators. Linkage-based mechanisms constitute promising systems in the development of deployable and reconfigurable structures with high flexibility and controllability. The present paper investigates the deployment and reconfigurability of modular linkage structures with a pin and a sliding support, the latter connected to a linear motion actuator. An appropriate control sequence consists of stepwise reconfigurations that involve the selective releasing of one intermediate joint in each closed-loop linkage, effectively reducing it to a 1-DOF "effective crank-slider" mechanism. This approach enables low self-weight and reduced energy consumption. A kinematics and finite-element analysis of different linkage systems, in all intermediate reconfiguration steps of a sequence, have been conducted for different lengths and geometrical characteristics of the members, as well as different actuation methods, i.e., direct and cable-driven actuation. The study provides insight into the impact of various structural typological and geometrical factors on the systems' behavior.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.384-390
• /
• 2018

치주적으로 지지가 불리한 소수의 잔존치가 남은 환자에게 있어 하이브리드 텔레스코픽형 이중관의치는 장기적으로 안정적인 예후를 보이는 치료가 된다. 편측 악궁에 소수 잔존치가 남고 반대측 악궁에 다수의 자연치가 존재 하는 경우 임플란트를 식립하여 자연치와 혼재된 형태의 이중관 의치를 제작 할 시 의치의 지지 및 안정요소의 향상과 더불어 저작력의 균형을 맞추어 줄 수 있게 된다. 본 증례는 55세 여자 환자로 만성 치주염으로 인해 치주 지지가 감소한 소수 잔존치 상태에서 자연치만으로 하이브리드 텔레스코픽형 이중관 의치 치료를 통해 9.5년간 의치를 사용하였다. 9.5년 후 지대치 파절로 내원 하여 임플란트의 식립을 통해 자연치와 임플란트가 혼재된 하이브리드 텔레스코픽형 이중관 의치로 재수 복 하였으며, 이를 통해 재 치료에서도 장기적 예후의 안정성을 기대 할 수 있다.

• 대한두개안면성형외과학회지
• /
• 제17권3호
• /
• pp.162-164
• /
• 2016

Stafne bone cavity is a rare mandibular defect that was first reported by Edward C. Stafne in 1942. It commonly presents with a well-demarcated, asymptomatic, unilateral radiolucency that indicates lingual invagination of the cortical bone. A 52-year-old female patient who with nasal bone fracture, visited the hospital. During facial bone computed tomography (CT) for facial area evaluation, a well-shaped cystic lesion was accidentally detected on the right side of the mandible. Compared to the left side, no swelling or deformity was observed in the right side of the oral lesion, and no signs of deformity caused by mucosal inflammation. 3D CT scans, and mandible series x-rays were performed, which showed a well-ossified radiolucent oval lesion. Axial CT image revealed a cortical defect containing soft tissue lesion, which has similar density as the submandibular gland on the lingual surface of the mandible. The fact that Stafne cavity is completely surrounded by the bone is the evidence to support the hypothesis that embryonic salivary gland is entrapped by the bone. In most cases, Stafne bone cavity does not require surgical treatment. We believe that the mechanical pressure from the salivary gland could have caused the defect.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.247-261
• /
• 2017

In the field of dynamic measurement and structural damage identification, it is generally known that modal frequencies may be measured with higher accuracy than mode shapes. However, the number of natural frequencies within a measurable range is limited. Accessing additional forms of modal frequencies is thus desirable. The present study is concerned about the extraction of artificial boundary condition (ABC) frequencies from modal testing. The ABC frequencies correspond to the natural frequencies of the structure with a perturbed boundary condition, but they can be extracted from processing the frequency response functions (FRF) measured in a specific configuration from the structure in its existing state without the need of actually altering the physical support condition. This paper presents a comprehensive experimental investigation into the measurability of the ABC frequencies from physical experiments. It covers the testing procedure through modal testing, the data processing and data analysis requirements, and the FRF matrix operations leading to the extraction of the ABC frequencies. Specific sources of measurement errors and their effects on the accuracy of the extracted ABC frequencies are scrutinised. The extracted ABC frequencies are subsequently applied in the damage identification in beams by means of finite element model updating. Results demonstrate that it is possible to extract the first few ABC frequencies from the modal testing for a variety of artificial boundary conditions incorporating one or two virtual pin supports, and the inclusion of ABC frequencies enables the identification of structural damages without the need to involve the mode shape information.