• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.12-17
• /
• 2007

Recently, Korean food culture has westernized and the consumption of meat has been increased. As a result an enormous amount of disposal of bone is generated and most of them are buried without reutilization. By making bone ash using pig bone, the possibilities of application are examined. The purpose of this study is to establish a manufacturing process of bone ash for the celadon bone body using pig bone. The calcination of the pig bone was mostly to change to the calcium phosphate hydroxide $(Ca_5(PO_4)_3OH)$. The celadon body mixed with pig bone ash 8%, $CaCO_3$ 9%, when fired at $1240^{\circ}C$ under reduction atmosphere, shows 0.1% of water absorption, 65.23 MPa of bending strength.

• 농업과학연구
• /
• 제42권2호
• /
• pp.125-129
• /
• 2015

This study was conducted to investigate the incidence of bone-fracture from pig carcass slaughtered in eight processing plants located in Daejeon and Chungnam area, Korea, during the year 2013 and 2014, and to evaluate the quality of semimembranous muscle from bone-fractured carcasses. Twenty semimembranous muscles were collected from bone-fractured carcasses and none bone-fractured (control) ones, respectively, after storage of pig carcass at $5^{\circ}C$ for 24 h. The pH, cooking loss, and color of semimembranous muscle were measured as quality parameters. In total 4,865,502 of pig carcasses, the occurrence of bone fracture was 0.328% (15,975 heads) and scored the highest defect (26.31%) in total abnormal carcasses. The pH and cooking loss of semimembranous muscle from bone-fractured carcasses were significantly lower than those of control (p<0.05). $L^*$ and $a^*$ values of semimembranous muscle were not significantly different between bone-fractured carcass and control whereas that of $b^*$ values was significantly higher in bone-fractured carcass than control (p<0.05). Eight out of twenty semimembranous muscle collected from bone-fractured carcasses were confirmed as PSE whereas only one in control. In conclusion, the incidence of bone-fracture pre- and during slaughter of pig may cause serious defects in final meat quality. Therefore, the proper handling and treatment should be implicated to avoid and/or decrease the incidence of bone-fracture of pigs.

• Journal of Biosystems Engineering
• /
• 제32권1호
• /
• pp.50-56
• /
• 2007

Highly porous composite bioceramic bone scaffolds were developed using sintered gnotobiotic pig bones. These scaffolds consisted of poly-D,L-lactic acid (P(D,L)LA) and bioceramic materials of pig bone powder. The bone scaffolds were able to promote biocompatibility and possess interconnected pores that would support cell adhesion and proliferation adequately. The composite scaffolds were tested with dental pulp stem cells for cytotoxicity test. Cells seeded on the composite scaffolds were readily attached, well proliferated, as confirmed by cytotoxicity test, and cell adhesion assessment. The composite bone scaffold had no toxicity in cytotoxicity test on the extract of 0.013 g scaffold to 2 ml culture medium. The cells on the composite bone scaffold proliferated better than cells on the P(D,L)LA scaffolds.

• 자원리싸이클링
• /
• 제15권2호
• /
• pp.45-49
• /
• 2006

폐기되는 돼지 뼈로 제조한 bone char를 이용하여 용액 중에 존재하는 구리이온 제거를 검토하였다. 이 논문은 구리이온 농도가 50mg/L 인 시료 용액에 흡착제로 bone char를 1, 3, 5, 7, 10, 15g/L 첨가하여 실험한 결과 흡착제 첨가량은 5g/L가 적합하였고 30 시간 처리하였을 경우 구리이온 제거효율은 96.5% 이었으므로 반응시간은 30 시간 이상이 효과적이었다. 구리이온 수용액의 초기 pH 증가는 흡착제 무게당 구리이온 흡착량이 증가하였다. 구리 이온의 흡착 실험자료는 Freundlich 등온식 모델에 잘 일치하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권6호
• /
• pp.467-477
• /
• 2011

Purpose: The objective of this study was to examine the affected period and the amount of bone formation during osteogenesis of intramembranous bone using low-intensity pulsed ultrasound (LPUS) $in$ $vivo$. Methods: Xeno-bone (Bio-oss) and autogenous bone were grafted bilaterally into mini-pig mandibles. The left mandible served as the control and the other mandible was treated with 3 MHz, 160 mW (output, 0.8 mW) ultrasound stimulation for 7 days 15 minutes per day. The mini-pigs were sacrificed at 1, 2, 4, and 8 weeks, and micro computed tomography (${\mu}CT$), a microscopic examination, and a statistical analysis were performed on the specimens. Results: Based on a computerized image analysis of the ${\mu}CT$ scans, the experimental group had an average 150% more new bone formation than that in the control group. The effect of LPUS continued during the post operative 2 weeks. The histomorphological microscopic examination showed similar results. Conclusion: Our results suggest the LPUS had an effect on early intramembranous bone formation in vivo.

• Journal of Korean Dental Science
• /
• 제5권1호
• /
• pp.21-28
• /
• 2012

Purpose: In this study the bone healing ability of autogenous tooth bone graft material as a substitute material was evaluated in a mini-pig cranial defect model through histologic examinations and osteonectin reverse transcription polymerase chain reaction (RT-PCR) quantitative analysis. Materials and Methods: A defect was generated in the cranium of mini-pigs and those without a defect were used as controls. In the experimental group, teeth extracted from the mini-pig were manufactured into autogenous tooth bone graft material and grafted to the defect. The mini-pigs were sacrificed at 4, 8, and 12 weeks to histologically evaluate bone healing ability and observe the osteonectin gene expression pattern with RT-PCR. Result: At 4 weeks, the inside of the bur hole showed fibrosis and there was no sign of bone formation in the control group. On the other hand, bone formation surrounding the tooth powder granule was observed at 4 weeks in the experimental group where the bur hole was filled with tooth powder. Osteonectin gene expression; there was nearly no osteonectin expression in the control group while active osteonectin expression was observed from 4 to 12 weeks in the experimental group. Conclusion: We believe this material will show better results when applied in a clinical setting.

• 한국임상수의학회지
• /
• 제20권1호
• /
• pp.91-95
• /
• 2003

It has been known that periods of absorption varies allografts or xenografts of transplantations of freeze-dried cortical bone(FDCB). In this study changes of absorption of FDCB in xenograft transplantations were evaluated according to extracted time with chloroform-methanol solution(CM sol.). The FDCB from pig was removed soft tissue by surgical knife. Fat of the FDCB was removed with treatments of CM sol. for 2, 6, and 10 days, then the treated FDCB was freeze-dried at $-80^{\circ}C$ and sterilized with ethylene oxide gas. The FDCB was transplanted to fifteen millimeter artificial-defected regions of 6 dogs on fibular diaphyses. This was biweekly examined by radiograph for 18 weeks. In result new bone formation with FDCB treated for 6 days was higher than the other bones treated for 2 and 10 days. Duration of absorption with FDCB treated for 6 days was longer than the others. The remain with FDCB treated for 10 days was more than the others.

• Imaging Science in Dentistry
• /
• 제38권2호
• /
• pp.81-87
• /
• 2008

Purpose: To investigate the relationship between 3D bone architectural parameters and direction-related elastic moduli of cancellous bone of mandibular condyle. Materials and Methods: Two micro-pigs (Micro-$pig^R$, PWG Genetics Korea) were used. Each pig was about 12 months old and weighing around 44 kg. 31 cylindrical bone specimen were obtained from cancellous bone of condyles for 3D analysis and measured by micro-computed tomography. Six parameters were trabecular thickness (Tb. Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI), degree of anisotropy (DA) and 3-dimensional fractal dimension (3DFD). Elastic moduli of three orthogonal directions (superior-inferior (SI), medial-lateral (ML), andterior-posterior (AP) direction) were calculated through finite element analysis. Results: Elastic modulus of superior-inferior direction was higher than those of other directions. Elastic moduli of 3 orthogonal directions showed different correlation with 3D architectural parameters. Elastic moduli of SI and ML directions showed significant strong to moderate correlation with BV/TV, SMI and 3DFD. Conclusion: Elastic modulus of cancellous bone of pig mandibular condyle was highest in the SI direction and it was supposed that the change into plate-like structure of trabeculae was mainly affected by increase of trabeculae of SI and ML directions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권5호
• /
• pp.375-379
• /
• 2011

Introduction: This study examined the effect of autogenous tooth bone used as a graft material for bone regeneration in an artificial bony defect of minipigs. Materials and Methods: Four healthy minipigs, weighing approximately 35-40 kg, were used. Four standardized artificial two-walled bony defects, 5 mm in length and depth, were made on the bilateral partial edentulous alveolar ridge on the mandible of minipigs, and autogenous tooth bone was augmented in the right side as the experimental group. On the other hand, only alloplastic bone graft material HA was grafted with the same size and manner in the left side as the control group. All minipigs were sacrificed at 4 weeks after a bone graft and evaluated histologically by Haematoxylin-eosin staining. The specimens were also evaluated semi-quantitatively via a histomorphometric study. The percentage of new bone over the total area was evaluated using digital software for an area calculation. Results: All specimens were available but one in the left side (control group) and two in the right side (experimental group) were missing during specimen preparation. The amount of bone formation and remodeling were higher in all experimental groups than the control. The mean percentage area for new bone in the experimental and control groups was $43.74{\pm}11.96%$ and $30.79{\pm}2.93%$, respectively. Conclusion: Autogenous tooth bone is a good alternative to autogenous bone with the possible clinical feasibility of an autogenous tooth bone graft in the reconstruction of bony defects.

• 한국식품영양과학회지
• /
• 제19권1호
• /
• pp.61-64
• /
• 1990

The influence of extraction time on the fatty acid profile and the contents of calcium and magnesium in pig's shank were examined. The 9 kinds of fatty acid were identified in water extracts from pig's shank by GLC. The profiles of fatty acids from different extraction were similer to each other,. The content of linolenic acid was increased after two-hours extraction however the amounts of MUFA, PUFA and p/s ratio were decreased by the longer extraction time. The amount of calcium was 124.7mg% in raw materials but water extracts and bone powder samples showed higher values. in case of magnesium it was 138.4mg% in raw materials, but the extracts showed lower amount and bone powder exhibited higher values.