• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.95-108
• /
• 1997

피에조 콘의 소산시험을 이용한 정규 압밀 지반의 압밀계수 추정은 그간 많은 연구자들에 의하여 연구되어 왔으나 각 연구자들의 가정 사항과 해석 방법에 따라 특정한 압밀도에 대해서도 매우 넓은 범위의 이론적인 해들이 제시되어 왔다. 본 연구에서는 보다 현실적이면서 전 범위의 압밀도에 걸쳐서 일관성 있는 압밀계수를 구할 수 있도록 최적화 기법을 적용하였다. 콘 관입효과를 고려하기 위해 연속적인 구형 공동확장을 적용하므로써 이론적으로 얻어지는 간극수압의 분포와 관입 간극수압으로부터 초기 과잉간극수압의 분포를 결정하였으며 축대칭 선형비혼합 압밀이론을 사용하여 유발된 과잉간극수압의 소산효과를 모사하였다. 이와 같이 계산된 소산곡 선과 실제 계측된 소산곡선의 차이를 최소화시키기 위하여 비구속 최적화 알고리듬인 BFGS가 사용되었고 golden section 일차원 탐색법이 사용되었다. 검증 예제를 통하여 적용된 최적화 기법의 안정된 수렴성을 확인하였고 실제 예제에 적용함으로써 제안된 방법이 넓은 범위의 압밀도 범위에서 계측된 소산곡선과 잘 일치하는 압밀계수를 산정함으로써 매우 효과적임을 확인 할 수 있었다.

• 한국농공학회지
• /
• 제39권1호
• /
• pp.102-111
• /
• 1997

Experiments both in laboratory and field were performed to compare and analyze the characteristics of alluvial clay. The alluvial clay was sampled in test site in which large-scaled tests for the part of the site are under process to suggest the rational method for alluvial clay and the criterion for ground settlement monitoring system. The followings were observed through the experiments : 1. Natural water content, plastic limit, and liquid limit of alluvial clay composed of highly fine grains were 40~80%, 10~20%, and 30~55%, respectively. The values of these properties were relatively small at the ground surface, while the values showed maximum at G.L.- l0m and gradually decreased below the level. 2. Shear strength of alluvial clay was proportionally increased to the depth. Unconfined and triaxial compressive strengths were 0.2~0.6kgf/$cm^2$ and 0.1~0.3kgf/$cm^2$, respectively. 3. Compression index and secondary compression index showed maximum values at G.L.-l0m and gradually decreased below the level. The value of consolidation coefficient was relatively large at the ground surface, constant with decreasing the depth, and incresed when G.L. was below -20m. 4. Piezocone test appeared that alluvial clay with N value of 2~4 was uniformly distributed with 20~ 30m thickness from the ground surface, sand seam was nonuniformly distributed, and penetration pore pressure was 0.8 ~ 1 times of the hydrostatic pressure. Undrained shear strength and consolidation coefficient were 0.04 ~ 0.76kgf / $cm^2$ and $2.88{\times} 10{^-4}~1.3{\times} 10{^-2} cm^2/s$ respectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.365-368
• /
• 2003

Despite of the simple equipment and operation, DMT has been widely used to obtain various soil parameters and those parameters have been successfully applied to geotechnical design practice. Among them, the estimation of horizontal coefficient of consolidation is so useful that many researchs recently have been carried out. However, simulation of the penetration of the DMT blade is complex due to the inherent difficulty on analyzing a plane strain deformation of the soil around blade. Therefore, empirical and semi-empirical methods that use the theoretical solution developed fur piezocone with some assumptions have been used to estimate the coefficient of consolidation from Dilatometer dissipation test. In this paper, coefficients of consolidation c$\_$h/ which were obtained using equivalent radius that is same area with the DMT blade and optimization technique are compared with those obtained from Oedometer test and other interpretation methods. It was found that a new method used in this study can give more precise horizontal coefficient of consolidation than other methods do.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1015-1023
• /
• 2010

While various PCPT-based methods for the analysis of consolidation were developed, additional laboratory test is needed to estimate the coefficient of consolidation. In this paper, hyperbolic method using PCPT dissipation curve for the estimation of coefficient of consolidation was proposed. To verify proposed method, field settlement test data and PCPT dissipation test data at same site were collected and analyzed. It is observed that proposed method shows good agreement with measured field settlement data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.361-368
• /
• 2000

In other to examine the compressibility characteristics of cohesive soils in the mouth of the Nakdong river, the oedometer tests were peformed on undisturbed and reconstituted samples obtained by continuous boring typically at 3 different sites. It is meaningful to compare the consolidation behavior of natural clays with a reference state because the natural clays are depending on the stress history, sedimentary environment and geological history. In this study, the insitu state of the Pusan clays was investigated using the concepts of ISL(Nagaraj, 2000) and ICL and SCL(Burland, 1990). And for the purpose of confirming the existence of the underconsolidated clays, a standpipe type piezometer test and a dissipation test by piezocone were performed at their sites. Consequently, the Pusan clays were evaluated as normally consolidated clays.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.370-375
• /
• 2005

This paper describes a systematic way of identifying the horizontal coefficient of consolidation for clayey soil under undrained condition and silty soil under partial drained condition by applying an optimization technique to the early part of dissipation data measured from the self-boring pressuremeter strain holding test. An analytical solution developed by Randolph & Wroth (1979) was implemented in normalized form to express the build-up and dissipation of excess pore pressures around a pressuremeter as a function of the rigidity index. Horizontal coefficient of consolidation was determined by minimizing the differences between theoretical and measured excess pore pressure curves using optimization technique. It was found that the proposed optimization technique can evaluate in-situ horizontal coefficient of consolidation rationally, which is similar with that obtained from the piezocone dissipation test. Furthermore, proposed method can evaluate appropriate coefficient of consolidation for soil under partially drained condition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.387-394
• /
• 2007

This study area located in HoNam High-Speed railway soft ground section. So it carried out the boring survey, field survey and test of laboratory. It collected the engineering data of ground and the data for the establishment arrangement. The investigation did a soil investigation in Nonsan. The investigation item excuted seismic piezocone penetration test, s-wave seismic refraction survey, ps logging test, density logging test which is a physical exploration and boring. Eventually, results of geotechnical and shear-wave survey are useful for ground information in soft ground that has identified the characteristics of geological responses and elastic modulus.

• 한국지반공학회논문집
• /
• 제17권4호
• /
• pp.153-160
• /
• 2001

딜라토메터를 이용한 현장 수평압밀계수 추정법의 국내 점토지반 및 실트질 지반에의 적용성을 평가하기 위해 국내 점토지반과 실트지반에 대하여 각각 딜라토메터 관입시험 및 소산시험을 수행하였다. 소산시험 결과로부터 DMT-C법 [p$_2$-log t법과 C-√t법]과 DMT-A법을 이용하여 수평압밀계수를 추정하여 상호 비교하였으며 다른 실험방법에서 얻어진 결과들과도 함께 비교하고 평가하였다. 비교대상으로는 동일지반의 현장 피에조콘 소산시험으로 얻어진 수평압밀계수 및 불교란시료에 대하여 수행된 로셀압밀실험 및 일차원 실내압밀실험 결과가 함께 이용되었다. 연구결과 C-√t법을 제외한 p$_2$-log t법과 DMT-A법은 국내 점토지반에 대하여 상호일치하는 결과를 줄 뿐 아니라 피에조콘 결과와도 비교적 잘 일치하는 수평 압밀계수를 측정하였으며 다른 결과와 비교할 때 신뢰성 있는 결과를 주었다. 그러나 실트질 지반에 대하여는 p$_2$-log t법만이 적용 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1204-1211
• /
• 2008

Compression index is one of the important characteristic numbers in soft soil engineering. Since 1940's, many researchers have suggested various practical solutions to define the compression index of clay using other soil properties. But, these results are only can give us an outline of soft soil behavior. In this study, the relationships between pore water pressure dissipation test results and compression index were suggested using comparison results of both tests. This relationships are based on basic concept of consolidation phenomena, essential difference between pore water pressure dissipation test and consolidation test, and disagreements between theoretical time factor and real time factor. To identify proportional factor of proposed equation, Geotechnical investigation results of Kwang-Yang(KY) site and Busan New Port(BN) site were used. The proportional factor was 0.0031 from 20 to 50% of consolidation rate where correlation parameter($R^2$) is 0.9051.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.73-81
• /
• 2002

국내 남해안 해성점토 지반의 응력이력(stress history)에 대하여 피조콘 관입시험 방법을 이용하여 통계분석과 사례 연구을 통하여 조사하였다. 경험식과 피조콘 관입시험으로 산정한 선행압밀응력과 과압밀비는 이론적, 경험적 상관관계를 찾고자 회귀분석을 수행하였고 기준값은 실내 표준압밀시험 결과를 토대로 하였다. 표준압밀시험에서 나타난 조사 지반의 응력이력 상태는 전체적으로 해수면 아래 표층 l0m까지는 과압밀된 상태였으나, 표층 l0m 아래 깊이에서는 과압밀비(OCR)가 0.3까지도 존재하여 전반적으로 지층상태는 불안정한 구조를 가지고 있었다. 응력이력에서 선행압밀하중의 결정은 Chen과 Mayne(1996)의 경험방법과 Konrad와 Law(1987)의 이론공식을 사용하였다. 산정결과, Chen과 Mayne(1996)의 경험공식중에서 간극수압을 이용한 예측방법이 가장 신뢰성이 높았다. 그리고 과압밀비도 Chen과 Mayne(1996)의 경험식이 가장 높은 신뢰성을 보였다. 하지만 Mayne과 Holtz(1988), 그리고 Mayne과 Bachus(1988)방법은 각각 OCR이 1.0이하인 미압밀 지반에서 좋은 결과를 제시하였다. 그러므로 피조콘 관입시험으로부터 지반의 응력이력을 산정하는 다양한 방법은 대부분 지반조건과 위치에 따라 그 결과가 크게 다르므로 지역과 현장특성을 반영한 적합식을 개발하여 지반 설계에 활용하는 것이 타당한 것으로 판단되었다.