• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.181-196
• /
• 2015

A 3.5 kHz or chirp sub-bottom profiling survey is widely used in the marine geological and engineering purpose exploration. However, swells in the sea degrade the quality of the survey data. The horizontal continuity of profiler data can be enhanced and the quality can be improved by correcting the influence of the swell. Accurate detection of sea bottom location is important in correcting the swell effect. In this study, we tried to pick sea bottom locations by finding the position of crossing a threshold of the maximum value for the raw data and transformed data of envelope or energy ratio. However, in case of the low-quality data where the sea bottom signals are not clear due to sea wave noise, automatic sea bottom detection at the individual traces was not successful. We corrected the mispicks for the low quality data and obtained satisfactory results by picking a sea bottom within a range considering the previous average of sea bottom, and excluding unreliable big-difference picks. In case of trace by trace picking, fewest mispicks were found when using energy ratio data. In case of picking considering the previous average, the correction result was relatively satisfactory when using raw data.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.115-121
• /
• 2009

It is to use effectively for stream channel and watershed management as the prediction and the analysis of bed changes characteristics in the Seomjin river downstream. The necessary data (section, bed composition material, pivot point water elevation, coefficient of roughness) with regard to analysis of the bed changes characteristics were based upon the survey data and analysis results in the Seomjin river maintenance basic plan. The prediction of bed changes was also completed with HEC-6 model. The study results were summarized as follows: The main factor of bed changes in the Seomjin river downstream can be decided by extreme extraction of bed aggregate rather than the change of hydrological data. According to the analysis of bed stability based on the relation between friction velocity and representative grain size, and the relation between dimensionless tractive force and representative grain size, the Seomjin river downstream appears to be increased overall. The bed composition material in the stream channel of the Seomjin river of 2003 year shows higher composition rate of gravel and lower composition rate of sand as compared to those of 1989 year. According to result that the prediction of bed changes, it is estimated that the bed will be risen approximately 1.5 m to the place up to 9 km from the estuary, have been repetitively risen and fallen up to 1 m to the place between $9{\sim}21\;km$ section, and fallen about 0.5m to the place between $22{\sim}25\;km$ section. As a result, the bed of the Seomjin river downstream can be decided to be risen gradually. However, since the prediction of this study is based on the assumption that there will be no forced aggregate picking, the bed changes can be much greater than expected when there is a massive aggregate picking as it had happened before.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.15-19
• /
• 1978

In order to identify hormone activities which related to the changing of cutaneous tissue and pupal bodies and also to identify the interaction of corpora allata hormone and prothoracic glandular band hormone which act upon the metamorphosis of the insect. The item of treatment is carried out in 5 different times at the interval of about 12 hours after 4 weeks from the first feeding of 4th instar stage, and as far as 5th instar stage in concerned 6 times of item treatments have been carried out, at about 12 hours interval after 72 hours from the molting, Item treatments were, made in the stage of spring, autumn rearing, However, during the period of post mounting stage and pre pupation by picking out of corpora allata in 5 times at the interval of hours the following change of pupal colour is observed; 1) By an early pick out of 4th instar stage, the three molters are found in greater number, However, by a later pick out the four molters are found instead of others. 2) An abnormal colour is found in the three and four molters when comparing with the control molters. 3) The most of control molters have shown the normal colour except a few samples. 4) As shown in the table 1 and 2, the death number of item treatment is greater in the autumn rearing season. 5) The picking out of corpora allata of 5th instar stage, the post mounting stage and pre pupation period is affecting the change of colour. 6) As a final conclusion, the corpora allata hormone is closely related to the changing of pupal colour.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.229-232
• /
• 2001

Wireless Internet based in WAP(Wireless Application Protocol) has been a very useful and attractive means picking up information through service irrelavant to time and space. And more the request of user has been diverse. In this paper, we implemented a Diet Menu System using expert knowledge-based rules on the WAP environment. This enables the moving man interested in diet to get information through wireless mobil hand phone. There are only connection-oriented system for this type of service till now. This paper has designed basic expert knowledge rules for result display, verified and implemented for WAP environment.

• 한국경영정보학회:학술대회논문집
• /
• 2007.06a
• /
• pp.168-173
• /
• 2007

인터넷 쇼핑몰들은 저조한 수익성에도 불구하고 소비자를 끌어들여 매출을 증대시키기 위해 다양한 유인가격전략을 사용하고 있으나 이러한 유인전략이 과연 효용성이 있는가 하는 문제를 주제로 6 개 인터넷 쇼핑몰의 실제 web logdata 를 활용하여 소비자의 실제 쇼핑행동을 파악하여 유인가격전략의 효용성을 실증적으로 측정하였다. 방대한 클릭데이터를 효과적으로 정리하는 방법을 제시했고 인터넷 쇼핑몰 업체의 유인가격전략 수립에 대한 가이드를 제시하였다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.4
• /
• pp.301-305
• /
• 2004

In a warehouse, plates listed in the different orders are placed mixed. Nevertheless, when plates are going out, a group of plates listed in the same order should be sequentially loaded on a transporter. Since the access to the plates is only from the top of the stack, it happens often that we have to move some plates on a temporary place in order to access a plate below them. This paper deals with a problem of sequencing orders for transportation to minimize the number of plates temporarily moved.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.62-67
• /
• 2005

A new picking algorithm has been developed on real-time basis for finding the onset of P wave as well as discriminating the micro seismic signal from artificial noise. Unlike the previous methods which have used the STA/LTA ratio for discriminating the P arrivals, we have adopted the slope discrimination methods for identifying the P onset. As result, this algorithm has been turned out to be efficient in both accuracy and computation in on-line system.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1574-1579
• /
• 2010

This paper deals with the development of warehouse layout design algorithm. In the developed model, receiving/outgoing areas, storage areas, picking/distribution areas, value-added operation areas and support areas are considered. For more efficient use of the warehouse floor space, a mezzanine floor is also considered. We develop heuristic algorithms of warehouse layout design for several cases: three types of warehouse and three types of flow. This study is expected to be used as a guideline in warehouse layout design phase.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.439-445
• /
• 2001

In this paper, several modal identification techniques without using the input information are investigated. Generally, the peak picking method is most widely used, however, other methods may give better estimates particularly for the cases with close modes and/ or highly damped system modes. Example analyses were carried out on three different structures, and the estimated modal parameters by various methods are compared.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.04a
• /
• pp.42-46
• /
• 1999

본 연구는 AutoMod를 이용한 오더피킹시스템의 최적설계 성능산정을 위한 모델의 연구로서 오더피킹 방법은 통로끝오터피킹(End-of-Aisle OP)의 방법을 사용하였다. 오더피피킹방법으로 시스템의 성능 산정을 위한 수리 모델과 이의 전산프로그램을 개발하였다. 수리모델의 제한사항들을 보완하기 위하여 AutoMod를 이용한 시뮬레이션방법을 응용하고 과정을 보였다. 예제를 통해서 구해진 각 시스템의 오더피킹 능력산정에의 응용결과를 구하였고, 주어진 수리모델의 결과와 AutoMod를 이용한 시뮬레이션방법으로 구한 결과를 도출하고 결과를 비교하여 보았다.