• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.760-767
• /
• 2022

This paper introduces alert fatigue and presents methods to measure alert fatigue by using physiological signals. Alert fatigue is a phenomenon that which an individual is constantly exposed to frequent alarms and becomes desensitized to them. Blind spots are one leading cause of struck-by accidents, which is one most common causes of fatal accidents on construction sites. To reduce such accidents, construction equipment is equipped with an alarm system. However, the frequent alarm is inevitable due to the dynamic nature of construction sites and the situation can lead to alert fatigue. This paper introduces alert fatigue and proposes methods to use physiological signals such as electroencephalography, electrodermal activity, and event-related potential for the measurement of alert fatigue. Specifically, this paper presents how raw data from the physiological sensors measuring such signals can be processed to measure alert fatigue. By comparing the processed physiological data to behavioral data, validity of the measurement is tested. Using preliminary experimental results, this paper validates that physiological signals can be useful to measure alert fatigue. The findings of this study can contribute to investigating alert fatigue, which will lead to lowering the struck-by accidents caused by blind spots.

• International Journal of Contents
• /
• v.10 no.2
• /
• pp.47-58
• /
• 2014

Physiological signals provide important clues in the diagnosis and prediction of disease. Analyzing these signals is important in health and medicine. In particular, data preprocessing for physiological signal analysis is a vital issue because missing values, noise, and outliers may degrade the analysis performance. In this paper, we propose PhysioCover, a system that can recover missing values of physiological signals that were monitored in real time. PhysioCover integrates a gradual method and EM-based Principle Component Analysis (PCA). This approach can (1) more readily recover long- and short-term missing data than existing methods, such as traditional EM-based PCA, linear interpolation, 5-average and Missing Value Singular Value Decomposition (MSVD), (2) more effectively detect hidden variables than PCA and Independent component analysis (ICA), and (3) offer fast computation time through real-time processing. Experimental results with the physiological data of an intensive care unit show that the proposed method assigns more accurate missing values than previous methods.

• Journal of Biomedical Engineering Research
• /
• v.12 no.4
• /
• pp.235-242
• /
• 1991

This research has reported that the selection and assessment of treatment in anxiety disorders depend to a large extend on patient reports of somatic symptomatology. However, the correspondence between such reports and actual physiological data Is unknown as the physiological measures used were taken in laboratory. The purpose of the ambulatory momboring device is, therefore, to present for analysis physiological data derived from the sub jects during their daily activities. The physiological parameters of interest are heart rate, respiratory rate, skin conductance level/response, skin temperature, and activity level. This device had an microcomputer based data acquisition unit, Interfaced to it for the purpose of data collection. The data is collected usually over a period of 12 hours. The data from the ambulatory monitoring device can be used to assess the psychophysiology of anxiety in the field. The data from the device will also reveal if patients who report different sets of symptoms differ physiologically too. Thls will help physicians for the right kind of treatment and also solve the many uncertainties that have existed thus far in quantizing anxiety.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.172-180
• /
• 1994

Implantable biotelemetry systems are indispensable tools not only in animal research but also in clinical medicine as such systems enable the acquisition of otherwise unavailable physiological data. We present the manufacture of CMOS IC and its system for implantable multichannel biotelemeter system. The internal circuits of this system are designed not only to achieve as multiple functions and low power dissipation as possible but also to enable continuous measurement of physiological data. Its main functions are to enable continuous measurement of physiological data and to accomplish on-off power swiching of an implantable battery by receiving appropriate commanc signals from an external circuit. The implantable circuits of this system are designed and fabricated on a single silicon chip using $1.5\mu$m n-well CMOS process technology. The total power dissipation of implantable circuits for a continuous operation was 6.7mW and for a stand-by operation was 15.2$\mu$ W. This system used together with approriate sensors is expected to contribute to clinical medicine telemetry system of measuring and wireless transmitting such significant physiological parameters as pressure pH and temperature.

• Journal of Korean Clinical Nursing Research
• /
• v.24 no.3
• /
• pp.363-370
• /
• 2018

Purpose: The study was conducted to investigate correlations between self-management and physiological measurements of patients on hemodialysis according to their age. Methods: The subjects were 120 patients on hemodialysis at three hospitals in S and G cities. Data were collected using a structured questionnaire and medical records. The collected data were analyzed using descriptive statistics including t-test, ANOVA, and Pearson's correlation analysis with the SPSS 23.0 program. Results: The levels of compliance with self-management were highest in the middle-aged group. There was no significant difference in physiological measurements between the different age groups. Conclusion: The results suggest that nurses should consider characteristics of different age groups to improve the levels of self-management and physiological measurements.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.1.1-5
• /
• 1994

In the single sweep record of event-related potential (ERP), the peak latency of P300, which is one of the most prominent positive peaks in the ERP record, might fluctuate according to the recording conditions. The fluctuation of the peak latency (measurement fluctuation) is the summation of the fluctuation caused by physiological factor (physiological fluctuation) and one by noise of background EEG (noise fluctuation). We propsed a method for estimating the interval of the physiological fluctuation based on a limited number of single sweep records. The noise fluctuation was estimated by using the relationship between the signal-to-noise (SN) ratio and the noise fluctuation based on the P300 model and the background EEG model. The interval estimate of the physiological fluctuation were obtained by subtracting the interval estimate of the noise fluctuation from that of the measurement fluctuation. The proposed method was tested by using simulation data of ERP and applied to actual ERP and data of normal subjects, and gave satisfactory results.

• Journal of Korean Public Health Nursing
• /
• v.23 no.2
• /
• pp.306-317
• /
• 2009

Objectives: The purpose of this study was to assess the characteristics of body weight perception and physiological index in young adult women. Methods: Subjects were 283 Korea women. Data was from the 2005 Korean National Health and Survey. Three groups-low normal and overweight-were based on Body mass index(BMI). General characteristics, health status perception, weight control behavior and physiological index such as BMI, total cholesterol, high-density cholesterol (HDL), low-density cholesterol (LDL), triglyceride, systolic and diastolic blood pressure, and waist circumference were compared. Data were analyzed by t-test, $x^2$-test and ANOVA using SPSS program. Results: Of the normal weight group, 28.7% of subjects perceived themselves as overweight. Of the low weight group, 30.3% regarded their weight as normal weight. Of the overweight subjects, weight control was attempted by exercise (50.1%) and food reduction (77.1%). Significant group-related differences were evident in HDL, LDL, triglyceride, systolic blood pressure and waist circumference among three groups. Conclusions: Perception and attitude regarding body weight can be inaccurate. A weight control program should consider the relation of physiological index and weight based on BMI.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.337-342
• /
• 2009

This paper describes a robust mobile u-healthcare system with multiple physiological signs measurement capability in real time with integration of WSN(wireless sensor network) technology and CDMA(code division multiple access) network. A cellular phone receives health data in WSN and performs local physiological signs analysis at a phone processor, and then transmits abnormal data to server for further detail or precise health signal evaluation by a medical doctor over a CDMA network. Physiological signs of the patients are continuously monitored, processed and analyzed locally at cellular phone process to produce useful medical information for diagnosis and tracking purposes. By local simple analysis in cellular phone processor we can save the data transmission cost in CDMA network. By using the developed integrate ubiquitous healthcare service architecture, patients can realize self-health checking so that the prevention actions can be taken earlier. Appropriate self-monitoring and self-management can cure disease and relieve pain especially for patients who suffer from chronic diseases that need long term observation.

• Research in Community and Public Health Nursing
• /
• v.15 no.2
• /
• pp.289-297
• /
• 2004

Purpose: This study was conducted to determine factors affecting workers' physiological somatic complain using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Method: Data were collected from the 1st to the 30th of December 1999. The subjects were 2.123 workers employed at 155 work sites. Collected date were analyzed through SAS/PC program. Result: According to individual characteristics, younger and women groups showed significantly higher physiological somatic complaint than elder men groups. By work condition, groups with higher physiological somatic complaint included workers of irregular shift work. Dark lighting, improper temperature in winter, improper ventilation, inappropriate humidity, unpleasant work environment and crowded work place were significantly related with physiological somatic complaint. By work-related factor, physiological somatic complaint was high in those with higher variance in work load, quantitative work load, role conflict, job burden, role ambiguity and future ambiguity. On the other hand, physiological somatic complaint was low in those with little underutilization of ability. As for the relationships between physiological somatic complaint and non-work related factors, physiological somatic complaint was high in workers who had a side job, were bringing up infants alone, cleaned the house alone, cared for the elderly and disabled persons, were studying, were volunteering at another organization, and were spending 5-10 hours in religious activities per week. Physiological somatic complain was in significantly negative correlations with overall social support, supervisory support and family support, but in significantly positive correlations with co-worker support. Conclusion: The main predictors of physiological somatic complain were gender, shift work pattern, overtime work, ventilation, role ambiguity, role conflict, future ambiguity, job control, variance in work load, overall social support, worker with side job, worker who cleans the house alone, worker who is studying. These predictors explained 19.10% of the total variance of physiological somatic complain.

• Journal of Acupuncture Research
• /
• v.18 no.4
• /
• pp.91-100
• /
• 2001

Background and Objective : Most diagnostic method for numbness were invasive and complex. So we need to simplify and objectify diagnostic method for numbness. Some study with EAV which is one of Physiological Signal Measuring Instruments, report significantly result as objective diagnostic method for other clinical symptom. By using EAV, we have obtained some physiological signal data from meridian-acupoints of 58 numbness cases. Objective and Methods : This study researched into the clinical statistics for 58 case who ware in numbness, and they ware treated with oriental medical care at the Dong-shin university oriental hospital during 1 year from April 3 2000 to March 30 2001. The data were analyzed and interpreted to compare with traditional differentiation of symptom-complexes, then further evaluated as the Five Evolutive Phases to make them differentiated. The EAV valus of Five Evolutive Phases were identified with the sequence of wood(木), fire(火), earth(土), steel(金), water(水). Results and Conclusion : These values of physiological signal were identical with standard differentiation of symptom-complexes of numbness which is the main cause of dishannonious flow of Qi and blood of the in the liver and deficiency of Qi and blood of the bladder with stagnancy of dampness. Among Five Evolutive Phases, Earth and wood values were increased, steel, fire and water were decreased significantly. This data imply the possibility of somewhat generalization from measuring instruments.