• 한국식품조리과학회지
• /
• 제33권2호
• /
• pp.190-197
• /
• 2017

Purpose: The purpose of this paper was to analyze the physicochemical properties related to peeling rate of Korean chestnut. Methods: Analyses were carried out for weight, thickness, polyphenol, amino acid and peeling ratio for Korean chestnut. The correlation between these physicochemical components and peeling ratio of chestnut was measured. Results: The average of thickness for inner shell and outer shell was 0.66 mm and 0.93 mm, respectively. The average peeling ratio was 77.51%. A significant negative correlation was found between peeling ratio and thickness of the inner shell ($r=-0.80^{***}$, p<0.001). Analysis for the polyphenol composition of inner shell by HPLC was carried out and peaks 2 ($r=-0.56^*$, p<0.05), 11 ($r=-0.68^{**}$, p<0.01), 14 ($r=-0.52^*$, p<0.05), 28 ($r=-0.66^{**}$, p<0.01) showed a significant negative correlation with the peeling ratio. Conclusion: Thickness of chestnut inner shell was determined as the most influential factors of peeling.

• 한국축산식품학회지
• /
• 제39권5호
• /
• pp.820-830
• /
• 2019

Most consumers consider yogurt to be a healthy food because it contains probiotic microorganisms. Although a plethora of commercially produced yogurts exists, nutritional and functional aspects of the commercial yogurts have not been well characterized. In this study, the microbiological and physicochemical properties of popular drinking yogurts in Korea were extensively characterized. The viability of lactic acid bacteria, including lactobacilli and bifidobacteria, varied between yogurt samples. These lactobacilli and bifidobacteria showed effective antimicrobial activities against foodborne pathogenic bacteria. Unlike the titratable acidity and pH, the soluble solids content varied between yogurt samples. All the yogurt samples contained high levels of potassium (average 143.53 mg/100 g) and calcium (average 133.92 mg/100 g), as well as phosphorus and sodium. Lactose, fructose, and glucose were the major sugar components in most yogurt samples, whereas the levels of sucrose and maltose were relatively low. Among several organic acids analyzed in the yogurt samples, lactic acid (average 767.67 mg/100 g) and citric acid (average 170.91 mg/100 g) were the most predominant. Taken together, this study provides preliminary information about the nutritional and functional characteristics of commercially available drinking yogurts.

• 한국토양비료학회지
• /
• 제19권3호
• /
• pp.251-268
• /
• 1986

Selecting a site for the safe disposal of radioactive waste requires the evaluation of a wide range of geologic, mineralogic, hydrologic, and physicochemical properties. Although highly diverse, these properties are in fact interrelated. Site requirements are also diverse because they are influenced by the nature of the radionuclides in the waste, for example, their half-lives, specific energy, and chemistry. A fundamental consideration in site selection is the mineralogy of the host rock, and one of the most ubiquitous mineral groups is clay minerals. Clays and clay minerals as in situ lithologic components and engineered barriers may playa significant role in retarding the migration of radionuclides. Their high sorptivity, longevity (stability), low permeability, and other physical factors should make them a very effective retainer of most radionuclides in nuclear wastes. There are, however, some unanswered questions. For example, how will their longevity and physicochemical properties be influenced by such factors as radionuclide concentration, radiation intensity, elevated temperatures, changes in redox condition, pH, and formation fluids for extended periods of time? Understanding of mechanisms affecting clay mineral-radionuclide interactions under prevailing geochemical conditions is important; however, the utilization of experimental geochemical information related to physicochemical properties of clays and clay-bearing materials with geohydrologic models presents a uniquely challenging problem in that many assessments have to be based on model predictions rather than on experiments. These are high-priority research investigations that need to be addressed before complete reliance for disposal area performance is made on clays and clay minerals.

• 동아시아식생활학회지
• /
• 제14권2호
• /
• pp.135-144
• /
• 2004

A total of 40 Korean and Japanese rice varieties were evaluated for their main chemical components, physical properties, cooking quality, pasting properties, and instrumental measurements. Based on their quality evaluations, it was concluded that Korean and Japanese rice varieties were not significantly different in the basic components of NIR (Near Infra Red) data and the chemical analysis from the uncooked brown and milled rices. Korean rice had a little bit higher protein and amylose contents but much lower fat acidity than those of Japanese rice from the chemical analysis. From all the data of three different kinds of NIR methods, Korean and Japanese milled rice were very similar except the taste score. Japanese rice showed a slightly higher taste score, a little bit higher lightness and whiteness, but lower yellowness and redness than Korean one. From all those data of NIR and the chemical analysis, Korean and Japanese rices had very similar components except the fat content.

• 한국식품영양과학회지
• /
• 제29권2호
• /
• pp.188-192
• /
• 2000

To obtain basic information for the quality evaluation, the introduced or domestic sesame seeds were investigated to measure proximate components (crude protein, ash, mineral and oil) and isolated by preparative HPLC system for lignan contents. Although crude protein contents were the highest in Sudan sesame seeds, lipid, ash and mineral contents were not significantly(p<0.05) different between introduced and domestric sesame seeds. Unsaturated fatty acids such as oleic and linoleic acids were the highest in the domestic sesame seeds. The Mg content of domestic sesame seeds also was larger than that of introduced sesame seeds. A Ca content of domestic sesame seeds, however, was significantly (p<0.05) lower than that of China. Lignan contents, the most important component known as antioxidant, were significantly (p<0.05) higher in domestic sesame seeds than other sesame seeds tested. Our findings suggest that domestic sesame seed has the best quality in terms of the functional components.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.262-265
• /
• 2000

In order to estimate spatial physicochemical properties of the spring waters in the study area, spring waters at 57 sites were investigated for measuring ten items (temperature, pH, Eh, EC, TDS, DO, salinity, alkalinity, discharge rate, and surface elevation), To compare each component with one another, regression analysis was carried out. Kriging was used to estimate the spatial characteristics and continuity of data in the study area. To solve kriging equation, the semivariogram was calculated using geostatistical software GS$^{+}$(version 3.1). As a result of semivariogram analysis, the data of nine components but surface elevation could be assumed as stationary random function, and ordinary kriging method was used for making contour maps.s.

• 한국식품위생안전성학회지
• /
• 제7권4호
• /
• pp.153-163
• /
• 1992

Dietary fiber imparts both mutritional and functional properties to foods. This review deals with (1) the classification of dietary fiber, (2) the plant cell wall models, (3) the relations between structure and physicochemical and functional properties of dietary fiber and (4) the applications of dietary fiber in foods. Dietary fiber can be classified in terms of source, plant function, solubility, charge and topology. Plant cell wall models are presented to provide information on the interconnections of dietary fiber components which determines the content of soluble and insoluble dietary fiber content. In reality, physicochemical and functional properties of dietary fiber originate factors such as chemical constituents , charge, branching degree, conformation and etc. Dietary fibers possess a variety of functional properties in food systems, which thus make them useful in food application. In particular, rheology and gelation of water-soluble gums or hydrocolloids are discussed for their effects on food quality. A guideline s also listed for the gum selection to meet the best product requirements.

• 한국식품영양과학회지
• /
• 제26권6호
• /
• pp.1221-1227
• /
• 1997

To measure nutritional components and physical quality of Wanja-jeon(Korean pan fried meat balls)was investigated during storage in a simulated hospital cook/chill foodservice system. The Wanja-jeon was cooked and stored for 4 weeks in chill conditions of 2 and 7$^{\circ}C$ and then reheated in the microwave oven. Moisture, protein, and fat contents were decreased little during 4 weeks storage at 2 and 7$^{\circ}C$. Total unsaturated fatty acids(TUFA) and polyunsaturated fatty acids(PUFA) increased slightly at 7$^{\circ}C$ storage. Total free amino acid contents were reduced after 4 weeks of storage, while total amino acids were affected little during chilled storage. However, volatile basic nitrogen(VBN) increased during the 4 weeks storage from 11.2mg%, immediately after cooking, to 14.1~14.2mg%. After reheating, thiobarbituric acid(TBA) value increased more significantly to 0.19 and 0.20.

• 한국식품과학회지
• /
• 제30권6호
• /
• pp.1279-1284
• /
• 1998

치커리의 적정 볶음조건 설정을 위하여 볶음조건에 따른 일반성분, 유리당, 갈색도, 가용성고형분 함량, 표면색깔 및 향기성분을 측정하였다. 각 온도별 적정 볶음조건은 $130^{\circ}C$에서는 30분, $150^{\circ}C$에서는 10분 그리고 $170^{\circ}C$에서는 3분이 가장 적당한 것으로 나타났으나 $150^{\circ}C$에서 10분간 볶음처리하는 것이 작업시간과 에너지 절약 측면에서 가장 좋은 것으로 나타났다. 가용성고형분 함량은 볶음온도나 시간에 영향을 받지 않았고 볶은 치커리의 유리당은 xylose 0.87%, fructose 0.62% 및 sucrose 0.84% 등 유리당 함량의 합은 2.33%였다. 치커리의 향기성분을 분리한 결과 23개의 주요 향기성분 피크를 얻었고 GC/MSD를 이용하여 이중 17개의 피크에 대하여 향기성분을 확인할 수 있었다. 확인된 향기성분을 분류하여 보면 aldehyde 화합물 5종, ketone 화합물 4종, pyrazine 화합물 4종, alcohol 화합물 3종 및 benzene 화합물 1종이었다.

• 농업과학연구
• /
• 제43권2호
• /
• pp.240-248
• /
• 2016

Radish is a common vegetable consumed in Korea, Japan, and China. Radish Breeding has been conducted based on morphological properties, such as shape and color. Recently, physicochemical properties of radish are attracting more attention from breeders to develop cultivars for the retail market. In this study, major components of radish were determined and their relationship with textural property analyzed. Sixty-six radish cultivars were selected and divided into white head (WH) and green head (GH) according to their head color. The cutting forces of GH and WH groups were $2.17{\pm}0.34kg$ and $2.31{\pm}0.36kg$, respectively (P > 0.05). The starch contents of GH and WH were $3.75{\pm}0.39g\;per\;100g$ (dry basis) and $4.24{\pm}0.62g$, respectively. Cellulose contents in both groups were similar at 12.3-12.4 g per 100 g (dry basis). Pearson correlation coefficients between cutting force, cellulose content, and starch content ranged from -0.33-0.326 which does not demonstrate any strong correlation between these components. Therefore, no relationship was found between the cutting force and the starch content or the cellulose content for the cultivars analyzed in this study. As the first intensive study on the texture and the major components of radish, these results could provide valuable information for radish breeding if further studies on taste and nutrient components are conducted.