• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.54-61
• /
• 2013

An equivalent model has been developed to estimate the electromagnetic immunity for integrated circuits under a complex electromagnetic environment. The complete model is based on the characteristics of the equipment and physical configuration of the device under test (DUT) and describes the measurement setup as well as the target integrated circuits under test, the corresponding package, and a specially designed printed circuit board. The advantage of the proposed model is that it can be applied to a SPICE-like simulator and the immunity of the integrated circuits can be easily achieved without costly and time-consuming measurements. After simulation, measurements were performed to verify the accuracy of the equivalent model for immunity prediction. The improvement of measurement accuracy due to the added effect of a bi-directional coupler in the test setup is also addressed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.332-339
• /
• 2013

The network nodes in a tactical network moves continuously and due to the physical and electronic obstacles, the connections are not always available. Due to the frequent disconnections, it is hard to discover the path among the nodes in a DTN. According to PROPHET(Probabilistic Routing Protocol using History of Encounters and Transitivity), one of the most well-known DTN routing protocols, a DTN node determines whom to forward a packet according to the packet delivery probability. From the viewpoint of a node, the packet delivery probability of another node is degraded while the nodes are disconnected whereas it is improved when they encounter. In this paper, we enhance the algorithm estimating the packet probability by considering the encounter count as an additional parameter. Our algorithm prefers the node that encounters the destination more frequently in selecting the next hop toward the destination. We evaluated the performance of our algorithm by simulating military operations using a DTN-dedicated simulator. Through the simulations, we show that our proposed algorithm achieve higher packet delivery ratio with similar overhead compared with PROPHET.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.953-957
• /
• 2009

The flight simulation the fact that imitates the real situation of flight for the training or boarding experience which manages a same flight equipment with the aircraft in goal. The flight simulation of existing attached importance in the research and development which is limited in the control which is visible and physical relate with the management of the airplane directly. So, the flight simulation applied in various game or simulator etc. But, there were not researches which are actual applies in flight simulation with considers the physiological phenomenon of pilot. Therefore this paper tries the flight simulation which assumes the physiological phenomenon as the blackout and a redout of pilot. In conclusion, predicts a future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.78-84
• /
• 2009

The purpose of this study was to compare gait patterns during pregnancy. Because of the changes in hormone levels and anatomical changes such as body mass, body-mass distribution, joint laxity, and musculotendinous strength that result from pregnancy, it was possible that there would be certain gait deviations associated with these changes. Three-dimensional gait analyses were performed from a self-selected pace, and six subjects(height : $163{\pm}5.3cm$, mass : $61.3{\pm}3.80kg$, $65.3{\pm}5.14kg$, $70.2{\pm}4.98kg$) participated in the three times(the early, middle and last years). 7 cameras(Proreflex MCU-240, Qualisys) and 2 force plates (Type 9286AA, Kistler) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D and Joint moments computed using inverse dynamics. In conclusion, pregnant women's gait patterns were changed during pregnancy period because pregnancy makes them physical changes. The main changes were joint moments and kinematic factors during pregnancy period. The pregnancy transformed normal gait pattern Into toe out position. Therefore, exercise programs to improve muscle activity were necessary where joint moments were small. The development of simulator should be studied for pregnant women's tailored shoes and accessories in future.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.4
• /
• pp.55-62
• /
• 2005

This study examined the effect of ergonomic heel rest that was designed for drivers who have physical handicap in the low leg muscles or have to drive prolonged hours with frequent foot pedaling. An experiment was designed to test the ergonomic heel rest with traditional foot pedal. Forty subjects participated in the experiment. Electromyography(EMG) was used to monitor the muscle activity and fatigue of right leg, and Electro-goniometer was used to measure the ranges of motions of the knee and ankle. A simulator of driver's seat was built for the experiment and the heel rest was installed on it. In order to examine the low muscle activity and range of motion, subjects used the foot pedal for 15 minutes repetitively for each experimental condition. Another 15 minutes test without the heel rest was also performed for comparison. The Root Mean Square(RMS) and Mean Power Frequency(MPF) Shift were used to quantify the level of muscle activity and local muscle fatigue. In results, statistically significant decreases of muscle activity and fatigue were found in all the low leg muscles. The range of motion of the knee and ankle joint also decreased when the heel rest was used. The mechanism of the heel rest effect was discussed in this study. This type of heel rest can be applied to real driving situation after ensuring the safety, or overcoming the psychological discomfort possibly due to unfamiliarity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.903-910
• /
• 2000

In this paper, we describe a slave chip based on the Profibus-DP protocol and a system board to verify the developed slave chip. The Profibus-DP protocol is designed using VHDL and implemented on FPGA. The system board adopting the developed FPGA is designed FPGA is designed in which the firmware is implemented on Intel 8051 by using C language. Among the Profibus-DP protocols, low level layers from the physical layer to the data link layer is implemented in the form of hardware that we are able to greatly reduce the CPU load in processing protocols, and then higher layers could be processed by software. These technologies result in an IP to make terminal devices in the distributed control systems. Therefore, many digital logics as well as communication logics can be implemented onto SOC(System On a Chip) and it could be applied to various fieldbus-related areas.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.1
• /
• pp.23-36
• /
• 1998

The primary objective of this research was to establish and quantify the relationship between the physical degradation factors of multimedia telecommunications (teleconferencing) system and Subjective human perception. The research was performed in two stages. A field survey of the real users and pilot experiments were carried out in the first stage to determine customers' major complaints and corresponding system degradation factors. A prototype teleconferencing simulator was developed in two separate sound-treated chambers equipped with audio/video equipment running under a custom-developed software program. In the second stage, simulation experiments using the semantic differential methodology were performed utilizing 26 paid participants (14 college students and 12 housewives). The results indicated that audio/video synchronization and the frame rate were the main system factors for both subject groups, but different pattern of factors' influence was found according to the group, implying that the system configuration would hopefully accommodate the characteristics of the end users. Also, a single quality index, developed for system preference, was revealed to be highly correlated with user satisfaction. The results provide some fundamental data on the human subjective perception of multimedia telecommunications quality, and further can help establish the quality standards to enhance service level.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.260-266
• /
• 2012

Syngas and hydrogen from the $CeO_2/ZrO_2$ coated foam devices were investigated under simulated solar radiation. The $CeO_2/ZrO_2$ coated SiC, Ni and Cu foam device were prepared using drop-coating method. Syngas production step was performed at $900^{\circ}C$, and hydrogen production process was performed for ten repeated cycles to compare the CeO2 conversion in syngas production step, $H_2$ yield in hydrogen production step and cycle reproducibility. The produced syngas had the $H_2$/CO ratio of 2, which was suitable for methanol synthesis or Fischer-Tropsch synthesis process. In addition, syngas and hydrogen production process is one of the promising chemical pathway for storage and transportation of solar heat by converting solar energy to chemical energy. After ten cycles of redox reaction, the $CeO_2/ZrO_2$ was analyzed using XRD pattern and SEM image in order to characterize the physical and chemical change of metal oxide at the high temperature.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.191-196
• /
• 1995

The intelligent human-machine interface (HMI) has been developed to enhance the safety and availability of a nuclear power plant by improving operational reliability The key elements of the HMI are the large display panels which present synopsis of the plant status and the compact, digital work stations for the primary operator control and monitoring functions. The work station consists of four consoles such as a dynamic alarm console (DAC), a system information console (SIC), a computerized operating-procedure console (COC), and a safety related information console (SRIC). The DAC provides clean alarm pictures, in which information overlapping is excluded and alarm impacts are discriminated, for quick situation awareness. The SIC covers a normal operation by offering all necessary plant information and control functions. In addition, it is closely linked with the DAC and the COC to automatically display related system information under the request of these consoles. The COC aids the operator with proper emergency operation guidelines so as to shutdown the plant safely, and it also reduces his physical/mental burden by automating the operating procedures. The SRIC continuously displays safety related information to allow the operator to assess the plant status focusing on plant safety. The proposed HMI has been validated and demonstrated with on-line data obtained from the full-scope simulator for Yonggwang Units 1,2.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.45-49
• /
• 2004

Objective of the study was to develop a garlic clove metering device. The metering device consisted of a drum, a bucket and a bucket cover. A garlic clove simulator was designed to simulate motions of garlic cloves in the metering device. Simulation was performed using a multibody dynamic analysis program, RecurDyn version 5.1. Physical properties of garlic cloves such as mass and center of gravity were determined using 3D CAD modeler, IDEAS version 10.0. In order to compare the results of the simulation with actual movement of a garlic, movement of garlic clove was photographed by a high speed camera. A prototype metering device was built and tested under various metering speeds and metering guide angles. At the 12 rpm metering speed, rate of single-clove-discharge was $90.0\%$ and missing rate $1.3\%$ at $5^{\circ}$.